Particle image velocimetry measurements of blood flow in a modeled carotid artery bifurcation

Cardiovascular diseases are on of the leading causes of mortality and morbidity in the western world. Amongst these diseases, atherosclerosis, a progressive narrowing of the arterial wall is one of the most severe and if untreated may lead to stroke or ischemic infarction. Fluid mechanic forces are a key player in the early development and progression of atherosclerosis and a better understanding of the interplay between haemodynamic and vascular diseases is needed. The carotid artery (CA) in one of the predominant sites of atherosclerotic plaque formation. In this work a transparent, scaled model of an average human carotid artery (AHCA) bifurcation was constructed and steady blood flow at Re = 290 and Re = 700 was simulated using an aqueous glycerin solution. Particle Image Velocimetry (PIV) measurements were performed in the plane of bifurcation and three axial planes in the carotid sinus. Flow inside the CA bifurcation was found to be three-dimensional with strong secondary currents due to the curvature of the vessel. An accurate method for wall shear stress (WSS) calculation along the outer internal carotid artery (ICA) wall is introduced. The method was tested against synthetically generated particle images and was found to perform best for an 8x8 pix2 interrogation windows. A large low momentum flow region with low WSS along the outer ICA wall exists, posing the potential for atherosclerotic plaque formation. Calculated WSS ranged between 0 and 21. Pa and compared well with in-vivo data

Airflow in a Domestic Kitchen Oven measured by Particle Image Velocimetry

Particle Image Velocimetry (PIV) was used to map the internal airflow of a domestic kitchen oven. Oven cooking performance is dependant on the airflow within the cavity. Previous flow measurement techniques such as hot wire anemometry and pitot probes are very time consuming and prone to error in the hot recirculating flow in an oven. The oven cavity, a commercially available mid-range oven, was modified for optical access. The PIV system consisted of a CCD camera, light sheet illumination from a pulsed Nd:YAG laser, and propanediol droplets and hollow glass spheres with a Stokes number of less than 0.055. Experiments were conducted in an empty oven at room temperature and at 180oC, and at 180oC with a single cooking tray installed. Velocity fields were measured in seven adjacent, coplanar object planes each on four different planes in the oven. The velocity data was averaged to yield mean flow fields, and the seven coplanar data fields were subsequently collaged to produce a full cross-sectional velocity map for each oven plane. In the cold and hot empty cavity a single vortex centred on the fan axis was seen, with strong radial flow. The maximum measured velocity in the cold oven was 1.8ms-1, which compared well with earlier hot-wire measurements. When a tray was introduced, the single vortex was replaced by three circulatory features. Shear flow was seen on both upper and lower sides of the tray, with a lower velocity and a stagnation point on the upper side

Experimental measurement of breath exit velocity and expirated bloodstain patterns produced under different exhalation mechanisms

In an attempt to obtain a deeper understanding of the factors which determine the characteristics of expirated bloodstain patterns, the mechanism of formation of airborne droplets was studied. Hot wire anemometry measured air velocity, 25 mm from the lips, for 31 individuals spitting, coughing and blowing. Expirated stains were produced by the same mechanisms performed by one individual with different volumes of a synthetic blood substitute in their mouth. The atomization of the liquid at the lips was captured with high-speed video, and the resulting stain patterns were captured on paper targets. Peak air velocities varied for blowing (6 to 64 m/s), spitting (1 to 64 m/s) and coughing (1 to 47 m/s), with mean values of 12 m/s (blowing), 7 m/s (spitting) and 4 m/s (coughing). There was a large (55–65%) variation between individuals in air velocity produced, as well as variation between trials for a single individual (25–35%). Spitting and blowing involved similar lip shapes. Blowing had a longer duration of airflow, though it is not the duration but the peak velocity at the beginning of the air motion which appears to control the atomization of blood in the mouth and thus stain formation. Spitting could project quantities of drops at least 1600 mm. Coughing had a shorter range of near 500 mm, with a few droplets travelling further. All mechanisms could spread drops over an angle >45°. Spitting was the most effective for projecting drops of blood from the mouth, due to its combination of chest motion and mouth shape producing strong air velocities. No unique method was found of inferring the physical action (spitting, coughing or blowing) from characteristics of the pattern, except possibly distance travelled. Diameter range in expirated bloodstains varied from very small (<1 mm) in a dense formation to several millimetres. No unique method was found of discriminating expirated patterns from gunshot or impact patterns on stain shape alone. Only 20% of the expirated patterns produced in this study contained identifiable bubble rings or beaded stains

Mendelian randomization identifies blood metabolites previously linked to midlife cognition as causal candidates in Alzheimer's disease.

There are currently no disease-modifying treatments for Alzheimer's disease (AD), and an understanding of preclinical causal biomarkers to help target disease pathogenesis in the earliest phases remains elusive. Here, we investigated whether 19 metabolites previously associated with midlife cognition-a preclinical predictor of AD-translate to later clinical risk, using Mendelian randomization (MR) to tease out AD-specific causal relationships. Summary statistics from the largest genome-wide association studies (GWASs) for AD and metabolites were used to perform bidirectional univariable MR. Bayesian model averaging (BMA) was additionally performed to address high correlation between metabolites and identify metabolite combinations that may be on the AD causal pathway. Univariable MR indicated four extra-large high-density lipoproteins (XL.HDL) on the causal pathway to AD: free cholesterol (XL.HDL.FC: 95% CI = 0.78 to 0.94), total lipids (XL.HDL.L: 95% CI = 0.80 to 0.97), phospholipids (XL.HDL.PL: 95% CI = 0.81 to 0.97), and concentration of XL.HDL particles (95% CI = 0.79 to 0.96), significant at an adjusted P < 0.009. MR-BMA corroborated XL.HDL.FC to be among the top three causal metabolites, in addition to total cholesterol in XL.HDL (XL.HDL.C) and glycoprotein acetyls (GP). Both XL.HDL.C and GP demonstrated suggestive univariable evidence of causality (P < 0.05), and GP successfully replicated within an independent dataset. This study offers insight into the causal relationship between metabolites demonstrating association with midlife cognition and AD. It highlights GP in addition to several XL.HDLs-particularly XL.HDL.FC-as causal candidates warranting further investigation. As AD pathology is thought to develop decades prior to symptom onset, expanding on these findings could inform risk reduction strategies

Assessment of dispersion of airborne particles of oral/nasal fluid by high flow nasal cannula therapy

Background Nasal High Flow (NHF) therapy delivers flows of heated humidified gases up to 60 LPM (litres per minute) via a nasal cannula. Particles of oral/nasal fluid released by patients undergoing NHF therapy may pose a cross-infection risk, which is a potential concern for treating COVID-19 patients. Methods Liquid particles within the exhaled breath of healthy participants were measured with two protocols: (1) high speed camera imaging and counting exhaled particles under high magnification (6 participants) and (2) measuring the deposition of a chemical marker (riboflavin-5-monophosphate) at a distance of 100 and 500 mm on filter papers through which air was drawn (10 participants). The filter papers were assayed with HPLC. Breathing conditions tested included quiet (resting) breathing and vigorous breathing (which here means nasal snorting, voluntary coughing and voluntary sneezing). Unsupported (natural) breathing and NHF at 30 and 60 LPM were compared. Results Imaging: During quiet breathing, no particles were recorded with unsupported breathing or 30 LPM NHF (detection limit for single particles 33 μm). Particles were detected from 2 of 6 participants at 60 LPM quiet breathing at approximately 10% of the rate caused by unsupported vigorous breathing. Unsupported vigorous breathing released the greatest numbers of particles. Vigorous breathing with NHF at 60 LPM, released half the number of particles compared to vigorous breathing without NHF. Chemical marker tests: No oral/nasal fluid was detected in quiet breathing without NHF (detection limit 0.28 μL/m3). In quiet breathing with NHF at 60 LPM, small quantities were detected in 4 out of 29 quiet breathing tests, not exceeding 17 μL/m3. Vigorous breathing released 200–1000 times more fluid than the quiet breathing with NHF. The quantities detected in vigorous breathing were similar whether using NHF or not. Conclusion During quiet breathing, 60 LPM NHF therapy may cause oral/nasal fluid to be released as particles, at levels of tens of μL per cubic metre of air. Vigorous breathing (snort, cough or sneeze) releases 200 to 1000 times more oral/nasal fluid than quiet breathing (p < 0.001 with both imaging and chemical marker methods). During vigorous breathing, 60 LPM NHF therapy caused no statistically significant difference in the quantity of oral/nasal fluid released compared to unsupported breathing. NHF use does not increase the risk of dispersing infectious aerosols above the risk of unsupported vigorous breathing. Standard infection prevention and control measures should apply when dealing with a patient who has an acute respiratory infection, independent of which, if any, respiratory support is being used

Evaluation of natural and tracer fluorescent emission methods for droplet size measurements in a diesel spray

The final publication is available at Springer via http://dx.doi.org/10.1007/s12239-012-0070-zSpray sizing that records fluorescent emission and scattered light has been widely applied to spray diagnostics over the last two decades. Different experimental strategies have been developed, but comparing the different solutions offered has remained of interest to experimentalists. In this work, a comparison of two fluorescence strategies for measuring droplet size in the liquid phase of a last-generation DI diesel spray is conducted. The natural fluorescent emission of a commercial diesel fuel and the fluorescence emitted by a tracer (Rhodamine B) are compared using theoretical and experimental approaches. The LIF/Mie ratio commonly called Planar Droplet Sizing (PDS) technique is applied in two different ways to elucidate the possible advantages of using a fluorescent dopant. The sprays were injected under non-evaporative conditions into a constant pressure vessel that simulates densities present at the moment of injection in currently used passenger car diesel engines. Characterization of the signal properties was performed by measuring the absorption coefficient, fluorescence emission spectrum, quantum yield and lifetime of both configurations. The scattered light and fluorescence intensities were calculated to verify the dependencies of the droplet surface and volume. When applying the two techniques to quantify droplet size in dense diesel sprays, the results show that signal weakness and lack of control over the properties of natural fluorescence produce distortion in the shape of the spray and cause measurements to be unreliable. © 2012 The Korean Society of Automotive Engineers and Springer-Verlag Berlin Heidelberg.This research has been funded in the frame of the project PROFUEL reference TRA2011-26293 from Ministerio de Ciencia e Innovacion. The injectors are part of the ECN international project.Pastor Soriano, JV.; Payri, R.; Salavert Fernandez, J.; Manin, J. (2012). Evaluation of natural and tracer fluorescent emission methods for droplet size measurements in a diesel spray. International Journal of Automotive Technology. 13(5):713-724. https://doi.org/10.1007/s12239-012-0070-zS713724135Albrecht, H. E., Damaschke, N., Borys, M. and Tropea, C. (2003). Laser Doppler and Phase Doppler Measurement Techniques. Springer. Berlin.Barnes, M. D., Whitten, W. B. and Ramsey, J. M. (1994). Enhanced fluorescence yields through cavity quantumelectrodynamic effects in microdroplets. J. Optical Society of America B 11,7, 1297–1304.Benajes, J., Molina, S., Novella, R., Amorim, R., Ben Hadj Hamouda, H. and Hardy, J. (2010). Comparison of two injection systems in an HSDI diesel engine using split injection and different injector nozzles. Int. J. Automotive Technology 11,2, 139–146.Charalampous, G. and Hardalupas, Y. (2011). Method to reduce errors of droplet sizing based on the ratio of fluorescent and scattered light intensities (laser-induced fluorescence/Mie technique). Applied Optics, 50, 3622–3637.Chen, G., Mazumder, M., Chang, R. K., Swindal, J. C. and Acker, W. P. (1996). Laser diagnostics for droplet characterization: Application of morphology dependent resonances. Progress in Energy and Combustion Science 22,2, 163–188.Desantes, J. M., Payri, R., Garcia, J. M. and Salvador, F. J. (2007). A contribution to the understanding of isothermal diesel spray dynamics. Fuel 86,7–8, 1093–1101.Domann, R. and Hardalupas, Y. A. (2000). Study of parameters that influence the accuracy of the planar droplet sizing (PDS) technique. Part. Part. Syst. Charact. 3–11.Domann, R. and Hardalupas, Y. A. (2001). Spatial distribution of fluorescence within large doplets and its dependence on dye concentration. Applied Optics 40,21, 3586–3597.Domann, R. and Hardalupas, Y. A. (2002). Quantitative measurement of planar droplet sauter mean diameter in sprays using planar droplet sizing. 11th Int. Symp. Application of Laser Techniques to Fluid Mechanics, Lisbon, Portugal.Eckbreth, A. C. (1988). Laser Diagnostics for Combustion Species and Temperature. Abacus. Cambridge. Mass.Greenhalgh, D. A. (1999). Planar measurements of fuel vapour, liquid fuel, liquid droplet size and soot. Planar Optical Measurement Methods for Gas Turbine Components, 1–7.Im, K., Lin, K., Lai, M. and Chon, M. (2011). Breakup modeling of a liquid jet in cross flow. Int. J. Automotive Technology 12,4, 489–496.Jermy, M. C. and Greenhalgh, D. A. (2000). Planar dropsizing by elastic and fluorescence scattering in sprays too dense for phase doppler measurement. Appl. Phys. B, 71, 703–710.Kim, Y., Kim, K. and Lee, K. (2011). Effect of a 2-stage injection strategy on the combustion and flame characteristics in a PCCI engine. Int. J. Automotive Technology 12,5, 639–644.Ko, F. H., Weng, L. Y., Ko, C. J. and Chu, T. C. (2006). Characterization of imprinting polymeric temperature variation with fluorescent Rhodamine B molecule. Microelectronic Engineering, 83, 864–868.Lakowicz, J. R. (2006). Principles of Fluorescence Spectroscopy. 3rd Edn. Springer.Lee, S. H., Teong, J., Lee, J. T., Ryou, H. S. and Hong, K. (2005). Investigation on spray characteristics under ultrahigh injection pressure conditions. Int. J. Automotive Technology 6,2, 125–131.Lee, B., Song, J., Chang, Y. and Jeon, C. (2010). Effect of the number of fuel injector holes on characteristics of combustion and emissions in a diesel engine. Int. J. Automotive Technology 11,6, 783–791.LeGal, P., Farrugia, N. and Greenhalgh, D. A. (1999). Laser sheet dropsizing of dense sprays. Optics and Laser Techn., 31, 75–83.Lockett, R. D., Richter, J. and Greenhalgh, D. A. (1998). The characterisation of a diesel spray using combined laser induced fluorescence and laser sheet dropsizing. Conf. Lasers and Electro-Optics Europe.Magde, D., Rojas, G. E. and Seybold, P. (1999). Solvent dependence of the fluorescence lifetimes of xanthene dyes. Photochem. Photobiol., 70, 737.Naber, J. and Siebers, D. (1996). Effects of gas density and vaporization on penetration and dispersion of diesel sprays. SAE Paper No. 960034.Pastor, J. V., López, J. J., Juliá, J. E. and Benajes, J. V. (2002). Planar laser-induced fluorescence fuel concentration measurements in isothermal diesel sprays. Opt. Express 10,7, 309–323.Pastor, J. V., Payri, R., Araneo, L. and Manin, J. (2009). Correction method for droplet sizing by laser-induced fluorescence in a controlled test situation. Optical Engineering 48,1, 013601.Payri, R., Garcia, J. M., Salvador, F. J. and Gimeno, J. (2005a). Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics. Fuel, 84, 551–561.Payri, R., Salvador, F. J., Gimeno, J. and Soare, V. (2005b). Determination of diesel sprays characteristics in real engine in-cylinder air density and pressure conditions. J. Mech. Sci. Technol., 19, 2040–2052.Payri, R., Tormos, B., Salvador, F. J. and Araneo, L. (2008). Spray droplet velocity characterization for convergent nozzles with three different diameters. Fuel 87,15, 3176–3182.Payri, F., Pastor, J., Payri, R. and Manin, J. (2011). Determination of the optical depth of a DI diesel spray. J. Mech. Sci. Technol., 25, 209–219.Potz, D., Chirst, W. and Dittus, B. (2000). Diesel nozzle: The determining interface between injection system and combustion chamber. Conf. Thermo and Fluid-dynamic Processes in Diesel Engines, Valencia, Spain.Ramírez, A. I., Som, S., Aggarwal, S. K., Kastengren, A. L., El-Hannouny, E. M., Longman, D. E. and Powell, C. F. (2009). Quantitative X-ray measurements of highpressure fuel sprays from a production heavy duty diesel injector. Experiments in Fluids 47,1, 119–134.Schulz, C. and Sick, V. (2005). Tracer-LIF diagnostics: quantitative measurement of fuel concentration, temperature and fuel/air ratio in practical combustion systems. Progress in Energy and Combustion Science, 31, 75–121.Sjoback, R. and Nygren, J. and Kubista, M. (1998). Characterization of fluorescein—oligonucleotide conjugates and measurement of local electrostatic potential. Biopolymers, 46, 445–453.Soare, V. (2007). Phase Doppler Measurement in Diesel Dense Sprays: Optimisation of Measurements and Study of the Orifice Geometry Influence Over the Spray at Microscopic Level. Ph.D. Dissertion. E.T.S. Ingenieros Industriales. Universidad Politécnica de Valencia. Spain.Williams, A. T. R., Winfield, S. A. and Miller, J. N. (1983). Relative fluorescence quantum yields using a computer controlled luminescence spectrometer. Analyst., 108, 1067.Yeh, C. N., Kosaka, H. and Kamimoto, T. A. (1993). Fluorescence/scattering imaging technique for instantaneous 2-D measurements of particle size distribution in a transient spray. Proc. 3rd Cong. Opt. Part. Sizing, Yokohama, Japan, 335–361

Multimodal Stimulation of Colorado Potato Beetle Reveals Modulation of Pheromone Response by Yellow Light

Orientation of insects to host plants and conspecifics is the result of detection and integration of chemical and physical cues present in the environment. Sensory organs have evolved to be sensitive to important signals, providing neural input for higher order multimodal processing and behavioral output. Here we report experiments to determine decisions made by Colorado potato beetle (CPB), Leptinotarsa decemlineata, in response to isolated stimuli and multimodal combinations of signals on a locomotion compensator. Our results show that in complete darkness and in the absence of other stimuli, pheromonal stimulation increases attraction behavior of CPB as measured in oriented displacement and walking speed. However, orientation to the pheromone is abolished when presented with the alternative stimulation of a low intensity yellow light in a dark environment. The ability of the pheromone to stimulate these diurnal beetles in the dark in the absence of other stimuli is an unexpected but interesting observation. The predominance of the phototactic response over that to pheromone when low intensity lights were offered as choices seems to confirm the diurnal nature of the insect. The biological significance of the response to pheromone in the dark is unclear. The phototactic response will play a key role in elucidating multimodal stimulation in the host-finding process of CPB, and perhaps other insects. Such information might be exploited in the design of applications to attract and trap CPB for survey or control purposes and other insect pests using similar orientation mechanisms

Impact of Climate Change on Voltinism and Prospective Diapause Induction of a Global Pest Insect – Cydia pomonella (L.)

Global warming will lead to earlier beginnings and prolongation of growing seasons in temperate regions and will have pronounced effects on phenology and life-history adaptation in many species. These changes were not easy to simulate for actual phenologies because of the rudimentary temporal (season) and spatial (regional) resolution of climate model projections. We investigate the effect of climate change on the regional incidence of a pest insect with nearly worldwide distribution and very high potential for adaptation to season length and temperature – the Codling Moth, Cydia pomonella. Seasonal and regional climate change signals were downscaled to the hourly temporal scale of a pest phenology model and the spatial scale of pest habitats using a stochastic weather generator operating at daily scale in combination with a re-sampling approach for simulation of hourly weather data. Under future conditions of increased temperatures (2045–2074), the present risk of below 20% for a pronounced second generation (peak larval emergence) in Switzerland will increase to 70–100%. The risk of an additional third generation will increase from presently 0–2% to 100%. We identified a significant two-week shift to earlier dates in phenological stages, such as overwintering adult flight. The relative extent (magnitude) of first generation pupae and all later stages will significantly increase. The presence of first generation pupae and later stages will be prolonged. A significant decrease in the length of overlap of first and second generation larval emergence was identified. Such shifts in phenology may induce changes in life-history traits regulating the life cycle. An accordingly life-history adaptation in photoperiodic diapause induction to shorter day-length is expected and would thereby even more increase the risk of an additional generation. With respect to Codling Moth management, the shifts in phenology and voltinism projected here will require adaptations of plant protection strategies to maintain their sustainability

The impact of viral mutations on recognition by SARS-CoV-2 specific T cells.

We identify amino acid variants within dominant SARS-CoV-2 T cell epitopes by interrogating global sequence data. Several variants within nucleocapsid and ORF3a epitopes have arisen independently in multiple lineages and result in loss of recognition by epitope-specific T cells assessed by IFN-γ and cytotoxic killing assays. Complete loss of T cell responsiveness was seen due to Q213K in the A∗01:01-restricted CD8+ ORF3a epitope FTSDYYQLY207-215; due to P13L, P13S, and P13T in the B∗27:05-restricted CD8+ nucleocapsid epitope QRNAPRITF9-17; and due to T362I and P365S in the A∗03:01/A∗11:01-restricted CD8+ nucleocapsid epitope KTFPPTEPK361-369. CD8+ T cell lines unable to recognize variant epitopes have diverse T cell receptor repertoires. These data demonstrate the potential for T cell evasion and highlight the need for ongoing surveillance for variants capable of escaping T cell as well as humoral immunity.This work is supported by the UK Medical Research Council (MRC); Chinese Academy of Medical Sciences(CAMS) Innovation Fund for Medical Sciences (CIFMS), China; National Institute for Health Research (NIHR)Oxford Biomedical Research Centre, and UK Researchand Innovation (UKRI)/NIHR through the UK Coro-navirus Immunology Consortium (UK-CIC). Sequencing of SARS-CoV-2 samples and collation of data wasundertaken by the COG-UK CONSORTIUM. COG-UK is supported by funding from the Medical ResearchCouncil (MRC) part of UK Research & Innovation (UKRI),the National Institute of Health Research (NIHR),and Genome Research Limited, operating as the Wellcome Sanger Institute. T.I.d.S. is supported by a Well-come Trust Intermediate Clinical Fellowship (110058/Z/15/Z). L.T. is supported by the Wellcome Trust(grant number 205228/Z/16/Z) and by theUniversity of Liverpool Centre for Excellence in Infectious DiseaseResearch (CEIDR). S.D. is funded by an NIHR GlobalResearch Professorship (NIHR300791). L.T. and S.C.M.are also supported by the U.S. Food and Drug Administration Medical Countermeasures Initiative contract75F40120C00085 and the National Institute for Health Research Health Protection Research Unit (HPRU) inEmerging and Zoonotic Infections (NIHR200907) at University of Liverpool inpartnership with Public HealthEngland (PHE), in collaboration with Liverpool School of Tropical Medicine and the University of Oxford.L.T. is based at the University of Liverpool. M.D.P. is funded by the NIHR Sheffield Biomedical ResearchCentre (BRC – IS-BRC-1215-20017). ISARIC4C is supported by the MRC (grant no MC_PC_19059). J.C.K.is a Wellcome Investigator (WT204969/Z/16/Z) and supported by NIHR Oxford Biomedical Research Centreand CIFMS. The views expressed are those of the authors and not necessarily those of the NIHR or MRC

Host plant range of a fruit fly community (Diptera: Tephritidae): Does fruit composition influence larval performance?

Background: Phytophagous insects differ in their degree of specialisation on host plants, and range from strictly monophagous species that can develop on only one host plant to extremely polyphagous species that can develop on hundreds of plant species in many families. Nutritional compounds in host fruits affect several larval traits that may be related to adult fitness. In this study, we determined the relationship between fruit nutrient composition and the degree of host specialisation of seven of the eight tephritid species present in La Réunion; these species are known to have very different host ranges in natura. In the laboratory, larval survival, larval developmental time, and pupal weight were assessed on 22 fruit species occurring in La Réunion. In addition, data on fruit nutritional composition were obtained from existing databases. Results: For each tephritid, the three larval traits were significantly affected by fruit species and the effects of fruits on larval traits differed among tephritids. As expected, the polyphagous species Bactrocera zonata, Ceratitis catoirii, C. rosa, and C. capitata were able to survive on a larger range of fruits than the oligophagous species Zeugodacus cucurbitae, Dacus demmerezi, and Neoceratitis cyanescens. Pupal weight was positively correlated with larval survival and was negatively correlated with developmental time for polyphagous species. Canonical correspondence analysis of the relationship between fruit nutrient composition and tephritid survival showed that polyphagous species survived better than oligophagous ones in fruits containing higher concentrations of carbohydrate, fibre, and lipid. Conclusion: Nutrient composition of host fruit at least partly explains the suitability of host fruits for larvae. Completed with female preferences experiments these results will increase our understanding of factors affecting tephritid host range. (Résumé d'auteur