130 research outputs found
Predictive control using an FPGA with application to aircraft control
Alternative and more efficient computational methods can extend the applicability of MPC to systems with tight real-time requirements. This paper presents a “system-on-a-chip” MPC system, implemented on a field programmable gate array (FPGA), consisting of a sparse structure-exploiting primal dual interior point (PDIP) QP solver for MPC reference tracking and a fast gradient QP solver for steady-state target calculation. A parallel reduced precision iterative solver is used to accelerate the solution of the set of linear equations forming the computational bottleneck of the PDIP algorithm. A numerical study of the effect of reducing the number of iterations highlights the effectiveness of the approach. The system is demonstrated with an FPGA-inthe-loop testbench controlling a nonlinear simulation of a large airliner. This study considers many more manipulated inputs than any previous FPGA-based MPC implementation to date, yet the implementation comfortably fits into a mid-range FPGA, and the controller compares well in terms of solution quality and latency to state-of-the-art QP solvers running on a standard PC
Recommended from our members
Predictive control of a Boeing 747 aircraft using an FPGA
New embedded predictive control applications call for more efficient ways of solving quadratic programs (QPs) in order to meet demanding real-time, power and cost requirements. A single precision QP-on-a-chip controller is proposed, implemented in a field-programmable gate array (FPGA) with an iterative linear solver at its core. A novel offline scaling procedure is introduced to aid the convergence of the reduced precision solver. The feasibility of the proposed approach is demonstrated with a real-time hardware-in-the-loop (HIL) experimental setup where an ML605 FPGA board controls a nonlinear model of a Boeing 747 aircraft running on a desktop PC through an Ethernet link. Simulations show that the quality of the closed-loop control and accuracy of individual solutions is competitive with a conventional double precision controller solving linear systems using a Riccati recursion.This work was supported by the EPSRC (Grants EP/G031576/1, EP/G030308/1 and EP/I012036/1) and the EU FP7 Project EMBOCON, as well as industrial support from Xilinx, the Mathworks, and the European Space Agency.IFAC Conference on Nonlinear Model Predictive Control 2012 (NMPC'12), Noordwijkerhout, the Netherlands on August 23 - 27, 2012
Predictive control using an FPGA with application to aircraft control
Alternative and more efficient computational methods can extend the applicability of MPC to systems with tight real-time requirements. This paper presents a ``system-on-a-chip'' MPC system, implemented on a field programmable gate array (FPGA), consisting of a sparse structure-exploiting primal dual interior point (PDIP) QP solver for MPC reference tracking and a fast gradient QP solver for steady-state target calculation.
A parallel reduced precision iterative solver is used to accelerate the solution of the set of linear equations forming the computational bottleneck of the PDIP algorithm. A numerical study of the effect of reducing the number of iterations highlights the effectiveness of the approach.
The system is demonstrated with an FPGA-in-the-loop testbench controlling a nonlinear simulation of a large airliner. This study considers many more manipulated inputs than any previous FPGA-based MPC implementation to date, yet the implementation comfortably fits into a mid-range FPGA, and the controller compares well in terms of solution quality and latency to state-of-the-art QP solvers running on a standard PC.This work was supported by EPSRC (Grants EP/G030308/1, EP/G031576/1 and EP/I012036/1) and the EU FP7 Project EMBOCON grant agreement number FP7-ICT-2009-4 248940, as well as industrial support from Xilinx, the Mathworks, and the European Space Agency.This is the author's version of an article that has been published in this journal. Changes were made to this version by the publisher prior to publication. The final version of record is available at: http://dx.doi.org/10.1109/TCST.2013.2271791. Copyright (c) 2014 IEEE. Personal use is permitted. For any other purposes, permission must be obtained from the IEEE by emailing [email protected]
Use of q-values to Improve a Genetic Algorithm to Identify Robust Gene Signatures
Several approaches have been proposed for the analysis of DNA microarray datasets, focusing on the performance and robustness of the final feature subsets. The novelty of this paper arises in the use of q-values to pre-filter the features of a DNA microarray dataset identifying the most significant ones and including this information into a genetic algorithm for further feature selection. This method is applied to a lung cancer microarray dataset resulting in similar performance rates and greater robustness in terms of selected features (on average a 36.21% of robustness improvement) when compared to results of the standard algorithm
Prevention of core particle depletion in stellarators by turbulence
In reactor-relevant plasmas, neoclassical transport drives an outward particle flux in the core of large stellarators and predicts strongly hollow density profiles. However, this theoretical prediction is contradicted by experiments. In particular, in Wendelstein 7-X, the first large optimized stellarator, flat or weakly peaked density profiles are generally measured, indicating that neoclassical theory is not sufficient and that an inward contribution to the particle flux is missing in the core. In this Research Letter, it is shown that the turbulent contribution to the particle flux can explain the difference between experimental measurements and neoclassical predictions. The results of this Research Letter also prove that theoretical and numerical tools are approaching the level of maturity needed for the prediction of equilibrium density profiles in stellarator plasmas, which is a fundamental requirement for the design of operation scenarios of present devices and future reactors
Multiservice capacity and interference statistics of the uplink of high altitude platforms (HAPs) for asynchronous and synchronous WCDMA system
In this work, the capacity and the interference statistics of the uplink of high-altitude platforms (HAPs) for asynchronous and synchronous WCDMA system assuming finite transmission power and imperfect power control are studied. Propagation loss used to calculate the received signal power is due to the distance, shadowing, and wall insertion loss. The uplink capacity for 3- and 3.75-G services is given for different cell radius assuming outdoor and indoor voice users only, data users only and a combination of the two services. For 37 macrocells HAP, the total uplink capacity is 3,034 outdoor voice users or 444 outdoor data users. When one or more than one user is an indoor user, the uplink capacity is 2,923 voice users or 444 data users when the walls entry loss is 10 dB. It is shown that the effect of the adjacent channels interference is very small
Effects of seagrasses and algae of the Caulerpa family on hydrodynamics and particle-trapping rates
The widespread decline of seagrass beds within the Mediterranean often results in the replacement of seagrasses by opportunistic green algae of the Caulerpa family. Because Caulerpa beds have a different height, stiffness and density compared to seagrasses, these changes in habitat type modify the interaction of the seafloor with hydrodynamics, influencing key processes such as sediment resuspension and particle trapping. Here, we compare the effects on hydrodynamics and particle trapping of Caulerpa taxifolia, C. racemosa, and C. prolifera with the Mediterranean seagrasses Cymodocea nodosa and Posidonia oceanica. All macrophyte canopies reduced near-bed volumetric flow rates compared to bare sediment, vertical profiles of turbulent kinetic energy revealed peak values around the top of the canopies, and maximum values of Reynolds stress increased by a factor of between 1.4 (C. nodosa) and 324.1 (P. oceanica) when vegetation was present. All canopies enhanced particle retention rates compared to bare sediment. The experimental C. prolifera canopy was the most effective at particle retention (m2 habitat); however, C. racemosa had the largest particle retention capacity per structure surface area. Hence, in terms of enhancing particle trapping and reducing hydrodynamic forces at the sediment surface, Caulerpa beds provided a similar or enhanced function compared to P.oceanica and C. nodosa. However, strong seasonality in the leaf area index of C. racemosa and C. taxifolia within the Mediterranean, combined with a weak rhizome structure, suggests that sediments maybe unprotected during winter storms, when most erosion occurs. Hence, replacement of seagrass beds with Caulerpa is likely to have a major influence on annual sediment dynamics at ecosystem scales.This research was funded by the European Network of Excellence ‘‘Marine Biodiversity and Ecosystem Function’’ (MarBEF); FP6, EC contract no. 505446 and a grant from the Fundacio ´n BBVA. EPM was supported by a European Union Marie Curie host fellowship for transfer of knowledge, MTKD-CT-2004-509254, the Spanish national project EVAMARIA (CTM2005-00395/MAR) and the regional government of Andalusia project FUNDIV(P07-RNM-2516)
Concurrent use of prescription drugs and herbal medicinal products in older adults: A systematic review
This is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.The use of herbal medicinal products (HMPs) is common among older adults. However, little is known about concurrent use with prescription drugs as well as the potential interactions associated with such combinations. Objective Identify and evaluate the literature on concurrent prescription and HMPs use among older adults to assess prevalence, patterns, potential interactions and factors associated with this use. Methods Systematic searches in MEDLINE, PsycINFO, EMBASE, CINAHL, AMED, Web of Science and Cochrane from inception to May 2017 for studies reporting concurrent use of prescription medicines with HMPs in adults (≥65 years). Quality was assessed using the Joanna Briggs Institute checklists. The Evidence for Policy and Practice Information and Co-ordinating Centre (EPPI-Centre) three stage approach to mixed method research was used to synthesise data. Results Twenty-two studies were included. A definition of HMPs or what was considered HMP was frequently missing. Prevalence of concurrent use by older adults varied widely between 5.3% and 88.3%. Prescription medicines most combined with HMPs were antihypertensive drugs, beta blockers, diuretics, antihyperlipidemic agents, anticoagulants, analgesics, antihistamines, antidiabetics, antidepressants and statins. The HMPs most frequently used were: ginkgo, garlic, ginseng, St John’s wort, Echinacea, saw palmetto, evening primrose oil and ginger. Potential risks of bleeding due to use of ginkgo, garlic or ginseng with aspirin or warfarin was the most reported herb-drug interaction. Some data suggests being female, a lower household income and less than high school education were associated with concurrent use. Conclusion Prevalence of concurrent prescription drugs and HMPs use among older adults is substantial and potential interactions have been reported. Knowledge of the extent and manner in which older adults combine prescription drugs will aid healthcare professionals can appropriately identify and manage patients at risk.Peer reviewedFinal Published versio
Recurrence dynamics does not depend on the recurrence site
Introduction: The dynamics of breast cancer recurrence and death, indicating a bimodal hazard rate pattern, has been confirmed in various databases. A few explanations have been suggested to help interpret this finding, assuming that each peak is generated by clustering of similar recurrences and different peaks result from distinct categories of recurrence. Methods: The recurrence dynamics was analysed in a series of 1526 patients undergoing conservative surgery at the National Cancer Institute of Milan, Italy, for whom the site of first recurrence was recorded. The study was focused on the first clinically relevant event occurring during the follow up (ie, local recurrence, distant metastasis, contralateral breast cancer, second primary tumour), the dynamics of which was studied by estimating the specific hazard rate.Results The hazard rate for any recurrence (including both local and distant disease relapses) displayed a bimodal pattern with a first surge peaking at about 24 months and a second peak at almost 60 months. The same pattern was observed when the whole recurrence risk was split into the risk of local recurrence and the risk of distant metastasis. However, the hazard rate curves for both contralateral breast tumours and second primary tumours revealed a uniform course at an almost constant level. When patients with distant metastases were grouped by site of recurrence (soft tissue, bone, lung or liver or central nervous system), the corresponding hazard rate curves displayed the typical bimodal pattern with a first peak at about 24 months and a later peak at about 60 months.Conclusions The bimodal dynamics for early stage breast cancer recurrence is again confirmed, providing support to the proposed tumour-dormancy-based model. The recurrence dynamics does not depend on the site of metastasis indicating that the timing of recurrences is generated by factors influencing the metastatic development regardless of the seeded organ. This finding supports the view that the disease course after surgical removal of the primary tumour follows a common pathway with well-defined steps and that the recurrence risk pattern results from inherent features of the metastasis development process, which are apparently attributable to tumour cells
Occupational exposure of workers to pesticides: Toxicogenetics and susceptibility gene polymorphisms
Farm workers are often exposed to pesticides, which are products belonging to a specific chemical group that affects the health of agricultural workers and is mostly recognized as genotoxic and carcinogenic. The exposure of workers from Piauí, Brazil, to these hazardous chemicals was assessed and cytogenetic alterations were evaluated using the buccal micronucleus assay, hematological and lipid parameters, butyrylcholinesterase (BChE) activity and genetic polymorphisms of enzymes involved in the metabolism of pesticides, such as PON1, as well as of the DNA repair system (OGG1, XRCC1 and XRCC4). Two groups of farm workers exposed to different types of pesticides were evaluated and compared to matched non-exposed control groups. A significant increase was observed in the frequencies of micronuclei, kariorrhexis, karyolysis and binucleated cells in the exposed groups (n = 100) compared to controls (n = 100). No differences were detected regarding the hematological parameters, lipid profile and BChE activity. No significant difference was observed either regarding DNA damage or nuclear fragmentation when specific metabolizing and DNA repair genotypes were investigated in the exposed groups
- …