49 research outputs found
Estimation of aerosol water and chemical composition from AERONET Sunâsky radiometer measurements at Cabauw, the Netherlands
Remote sensing of aerosols provides important information on atmospheric
aerosol abundance. However, due to the hygroscopic nature of aerosol
particles observed aerosol optical properties are influenced by atmospheric
humidity, and the measurements do not unambiguously characterize the aerosol
dry mass and composition, which complicates the comparison with aerosol
models. In this study we derive aerosol water and chemical composition by a
modeling approach that combines individual measurements of remotely sensed
aerosol properties (e.g., optical thickness, single-scattering albedo,
refractive index and size distribution) from an AERONET (Aerosol Robotic
Network) Sunâsky radiometer with radiosonde measurements of relative
humidity. The model simulates water uptake by aerosols based on the chemical
composition (e.g., sulfates, ammonium, nitrate, organic matter and black
carbon) and size distribution. A minimization method is used to calculate
aerosol composition and concentration, which are then compared to in situ
measurements from the Intensive Measurement Campaign At the Cabauw Tower
(IMPACT, May 2008, the Netherlands). Computed concentrations show good
agreement with campaign-average (i.e., 1â14 May) surface observations (mean
bias is 3% for PM<sub>10</sub> and 4â25% for the individual compounds). They
follow the day-to-day (synoptic) variability in the observations and are in
reasonable agreement for daily average concentrations (i.e., mean bias is
5% for PM<sub>10</sub> and black carbon, 10% for the inorganic salts and
18% for organic matter; root-mean-squared deviations are 26% for
PM<sub>10</sub> and 35â45% for the individual compounds). The modeled water
volume fraction is highly variable and strongly dependent on composition.
During this campaign we find that it is >0.5 at approximately 80% relative humidity
(RH) when the aerosol composition is dominated by hygroscopic inorganic salts, and
<0.1 when RH is below 40%, especially when the composition is
dominated by less hygroscopic compounds such as organic matter. The
scattering enhancement factor (f(RH), the ratio of the scattering coefficient
at 85% RH and its dry value at 676 nm) during 1â14 May is
2.6 ± 0.5. The uncertainty in AERONET (real) refractive index
(0.025â0.05) is the largest source of uncertainty in the modeled aerosol
composition and leads to an uncertainty of 0.1â0.25 (50â100%) in aerosol
water volume fraction. Our methodology performs relatively well at Cabauw,
but a better performance may be expected for regions with higher aerosol
loading where the uncertainties in the AERONET inversions are smaller
Enhancement of the aerosol direct radiative effect by semi-volatile aerosol components: airborne measurements in North-Western Europe
A case study of atmospheric aerosol measurements exploring the impact of the vertical distribution of aerosol chemical composition upon the radiative budget in North-Western Europe is presented. Sub-micron aerosol chemical composition was measured by an Aerodyne Aerosol Mass Spectrometer (AMS) on both an airborne platform and a ground-based site at Cabauw in the Netherlands. The examined period in May 2008 was characterised by enhanced pollution loadings in North-Western Europe and was dominated by ammonium nitrate and Organic Matter (OM). Both ammonium nitrate and OM were observed to increase with altitude in the atmospheric boundary layer. This is primarily attributed to partitioning of semi-volatile gas phase species to the particle phase at reduced temperature and enhanced relative humidity. Increased ammonium nitrate concentrations in particular were found to strongly increase the ambient scattering potential of the aerosol burden, which was a consequence of the large amount of associated water as well as the enhanced mass. During particularly polluted conditions, increases in aerosol optical depth of 50â100% were estimated to occur due to the observed increase in secondary aerosol mass and associated water uptake. Furthermore, the single scattering albedo was also shown to increase with height in the boundary layer. These enhancements combined to increase the negative direct aerosol radiative forcing by close to a factor of two at the median percentile level. Such increases have major ramifications for regional climate predictions as semi-volatile components are often not included in aerosol models.
The results presented here provide an ideal opportunity to test regional and global representations of both the aerosol vertical distribution and subsequent impacts in North-Western Europe. North-Western Europe can be viewed as an analogue for the possible future air quality over other polluted regions of the Northern Hemisphere, where substantial reductions in sulphur dioxide emissions have yet to occur. Anticipated reductions in sulphur dioxide in polluted regions will result in an increase in the availability of ammonia to form ammonium nitrate as opposed to ammonium sulphate. This will be most important where intensive agricultural practises occur. Our observations over North-Western Europe, a region where sulphur dioxide emissions have already been reduced, indicate that failure to include the semi-volatile behaviour of ammonium nitrate will result in significant errors in predicted aerosol direct radiative forcing. Such errors will be particularly significant on regional scales
BOREAS â a new MAX-DOAS profile retrieval algorithm for aerosols and trace gases
We present a new MAX-DOAS profiling algorithm for aerosols and trace gases,
BOREAS, which utilizes an iterative solution method including Tikhonov
regularization and the optimal estimation technique. The aerosol profile
retrieval is based on a novel approach in which the absorption depth of
O4 is directly used in order to retrieve extinction coefficient
profiles instead of the commonly used perturbation theory method. The
retrieval of trace gases is done with the frequently used optimal estimation
method but significant improvements are presented on how to deal with wrongly
weighted a priori constraints and for scenarios in which the a priori profile
is inaccurate.
Performance tests are separated into two parts. First, we address the general
sensitivity of the retrieval to the example of synthetic data calculated with
the radiative transfer model SCIATRAN. In the second part of the study, we
demonstrate BOREAS profiling accuracy by validating the results with the help of
ancillary measurements carried out during the CINDI-2 campaign in Cabauw, the
Netherlands, in 2016.
The synthetic sensitivity tests indicate that the regularization between
measurement and a priori constraints is insufficient when knowledge of the
true state of the atmosphere is poor. We demonstrate a priori pre-scaling and
extensive regularization tests as a tool for the optimization of retrieved
profiles. The comparison of retrieval results with in situ, ceilometer,
NO2 lidar, sonde and long-path DOAS measurements during the CINDI-2
campaign always shows high correlations with coefficients greater than 0.75.
The largest differences can be found in the morning hours, when the planetary
boundary layer is not yet fully developed and the concentration of trace
gases and aerosol, as a result of a low night-time boundary layer having
formed, is focused in a shallow, near-surface layer.</p
EUCAARI ion spectrometer measurements at 12 European sites â analysis of new particle formation events
We present comprehensive results on continuous atmospheric cluster and particle measurements in the size range ~1â42 nm within the European Integrated project on Aerosol Cloud Climate and Air Quality interactions (EUCAARI) project. We focused on characterizing the spatial and temporal variation of new particle formation events and relevant particle formation parameters across Europe. Different types of air ion and cluster mobility spectrometers were deployed at 12 field sites across Europe from March 2008 to May 2009. The measurements were conducted in a wide variety of environments, including coastal and continental locations as well as sites at different altitudes (both in the boundary layer and the free troposphere). New particle formation events were detected at all of the 12 field sites during the year-long measurement period. From the data, nucleation and growth rates of newly formed particles were determined for each environment. In a case of parallel ion and neutral cluster measurements, we could also estimate the relative contribution of ion-induced and neutral nucleation to the total particle formation. The formation rates of charged particles at 2 nm accounted for 1â30% of the corresponding total particle formation rates. As a significant new result, we found out that the total particle formation rate varied much more between the different sites than the formation rate of charged particles. This work presents, so far, the most comprehensive effort to experimentally characterize nucleation and growth of atmospheric molecular clusters and nanoparticles at ground-based observation sites on a continental scale
Primary Versus Secondary Contributions to Particle Number Concentrations in the European Boundary Layer
It is important to understand the relative contribution of primary and secondary particles to regional and global aerosol so that models can attribute aerosol radiative forcing to different sources. In large-scale models, there is considerable uncertainty associated with treatments of particle formation (nucleation) in the boundary layer (BL) and in the size distribution of emitted primary particles, leading to uncertainties in predicted cloud condensation nuclei (CCN) concentrations. Here we quantify how primary particle emissions and secondary particle formation influence size-resolved particle number concentrations in the BL using a global aerosol microphysics model and aircraft and ground site observations made during the May 2008 campaign of the European Integrated Project on Aerosol Cloud Climate Air Quality Interactions (EUCAARI). We tested four different parameterisations for BL nucleation and two assumptions for the emission size distribution of anthropogenic and wildfire carbonaceous particles. When we emit carbonaceous particles at small sizes (as recommended by the Aerosol Intercomparison project, AEROCOM), the spatial distributions of campaign-mean number concentrations of particles with diameter >50 nm (N50) and >100 nm (N100) were well captured by the model (R2â„0.8) and the normalised mean bias (NMB) was also small (â18% for N50 and â1% for N100). Emission of carbonaceous particles at larger sizes, which we consider to be more realistic for low spatial resolution global models, results in equally good correlation but larger bias (R2â„0.8, NMB = â52% and â29%), which could be partly but not entirely compensated by BL nucleation. Within the uncertainty of the observations and accounting for the uncertainty in the size of emitted primary particles, BL nucleation makes a statistically significant contribution to CCN-sized particles at less than a quarter of the ground sites. Our results show that a major source of uncertainty in CCN-sized particles in polluted European air is the emitted size of primary carbonaceous particles. New information is required not just from direct observations, but also to determine the "effective emission size" and composition of primary particles appropriate for different resolution models.JRC.H.2-Air and Climat
Is a scaling factor required to obtain closure between measured and modelled atmospheric Oâ absorptions? An assessment of uncertainties of measurements and radiative transfer simulations for 2 selected days during the MAD-CAT campaign
In this study the consistency between MAX-DOAS measurements and radiative transfer simulations of the atmospheric O4 absorption is investigated on 2 mainly cloud-free days during the MAD-CAT campaign in Mainz, Germany, in summer 2013. In recent years several studies indicated that measurements and radiative transfer simulations of the atmospheric O4 absorption can only be brought into agreement if a so-called scaling factor (<1) is applied to the measured O4 absorption. However, many studies, including those based on direct sunlight measurements, came to the opposite conclusion, that there is no need for a scaling factor. Up to now, there is no broad consensus for an explanation of the observed discrepancies between measurements and simulations. Previous studies inferred the need for a scaling factor from the comparison of the aerosol optical depths derived from MAX-DOAS O4 measurements with that derived from coincident sun photometer measurements. In this study a different approach is chosen: the measured O4 absorption at 360ânm is directly compared to the O4 absorption obtained from radiative transfer simulations. The atmospheric conditions used as input for the radiative transfer simulations were taken from independent data sets, in particular from sun photometer and ceilometer measurements at the measurement site. This study has three main goals: first all relevant error sources of the spectral analysis, the radiative transfer simulations and the extraction of the input parameters used for the radiative transfer simulations are quantified. One important result obtained from the analysis of synthetic spectra is that the O4 absorptions derived from the spectral analysis agree within 1â% with the corresponding radiative transfer simulations at 360ânm. Based on the results from sensitivity studies, recommendations for optimised settings for the spectral analysis and radiative transfer simulations are given. Second, the measured and simulated results are compared for 2 selected cloud-free days with similar aerosol optical depths but very different aerosol properties. On 18 June, measurements and simulations agree within their (rather large) uncertainties (the ratio of simulated and measured O4 absorptions is found to be 1.01±0.16). In contrast, on 8 July measurements and simulations significantly disagree: for the middle period of that day the ratio of simulated and measured O4 absorptions is found to be 0.82±0.10, which differs significantly from unity. Thus, for that day a scaling factor is needed to bring measurements and simulations into agreement. Third, recommendations for further intercomparison exercises are derived. One important recommendation for future studies is that aerosol profile data should be measured at the same wavelengths as the MAX-DOAS measurements. Also, the altitude range without profile information close to the ground should be minimised and detailed information on the aerosol optical and/or microphysical properties should be collected and used.
The results for both days are inconsistent, and no explanation for a O4 scaling factor could be derived in this study. Thus, similar but more extended future studies should be performed, including more measurement days and more instruments. Also, additional wavelengths should be included
A parameterization of size resolved below cloud scavenging of aerosols by rain
International audienceA size dependent parameterization for the removal of aerosol particles by falling rain droplets is developed. Scavenging coefficients are calculated explicitly as a function of aerosol particle size and precipitation intensity including the full interaction of rain droplet size distribution and aerosol particles. The actual parameterization is a simple and accurate three-parameter fit through these pre-calculated scavenging coefficients. The parameterization is applied in the global chemistry transport model TM4 and the importance of below-cloud scavenging relative to other removal mechanisms is investigated for sea salt aerosol. For a full year run (year 2000), we find that below-cloud scavenging accounts for 12% of the total removal of super-micron aerosol. At mid-latitudes of both hemispheres the fractional contribution of below-cloud scavenging to the total removal of super-micron sea salt is about 30% with regional maxima exceeding 50%. Below-cloud scavenging reduces the global average super-micron aerosol lifetime from 2.47 to 2.16 days in our simulations. Despite large uncertainties in precipitation, relative humidity, and water uptake by aerosol particles, we conclude that below cloud scavenging is likely an important sink for super-micron sized sea salt aerosol particles that needs to be included in size-resolved aerosol models
Aerosol source apportionment from 1 year measurements at the CESAR tower at Cabauw, NL
Intensive measurements of submicron aerosol particles and their chemical composition were performed with an Aerosol Chemical Speciation Monitor (ACSM) at the Cabauw Experimental Site for Atmospheric Research (CESAR) in Cabauw, NL. The campaign lasted nearly one year from July 2012 to June 2013 as part of the ACTRIS project. Including black carbon data an average particulate mass concentration of 9.50 ÎŒg mâ3 was obtained during the whole campaign with dominant contributions from ammonium nitrate (45 %), organic aerosol (OA, 29 %), and ammonium sulfate (19 %). 12 exceedances of the World Health Organization (WHO) PM2.5 daily mean limit (25 ÎŒg mâ3) were observed at this rural site using PM1 instrumentation only. Ammonium nitrate and OA represented the largest contributors to total particulate matter during periods of exceedance.Source apportionment of OA was performed season-wise by Positive Matrix Factorization (PMF) using the Multilinear Engine 2 (ME-2) controlled via the source finder (SoFi). Primary organic aerosols were attributed mainly to traffic (8â16 % contribution to total OA, averaged season-wise) and biomass burning (0â23 %). Secondary organic aerosols (SOA, 61â84 %) dominated the organic fraction during the whole campaign, particularly on days with high mass loadings. A SOA factor which is attributed to humic-like substances (HULIS) was identified as a highly oxidized background aerosol in Cabauw. This shows the importance of atmospheric ageing processes for aerosol concentration at this rural site. Due to the large secondary fraction, the reduction of particulate mass at this rural site is challenging on a local scale