85 research outputs found
Bonded Fibre Reinforced Polymer Strengthening in a Real Fire
FRP strengthening is critically dependent upon the bonding adhesive. The adhesive used is typically an ambient cure epoxy with a glass transition temperature as low as 60ºC. This paper describes the performance of bonded FRP strengthening within real compartment fires (the Dalmarnock Fire Tests), one of which was allowed to grow past flashover. The aim of these real fire tests was to complement the laboratory-based fire tests on FRP strengthened members that are currently being undertaken at various research centres. In this study, externally bonded plate and near-surface-mounted FRP strengthening were applied to the ceiling of a concrete structure. The FRP was protected using either an intumescent coating or gypsum boards, alongside FRP that was left unprotected. The tests demonstrated the
vulnerability of FRP strengthening during a real compartment fire. The glass transition
temperature was rapidly exceeded in the bonding adhesive for all samples. The near-surface mounted strengthening and the gypsum board protected strengthening was in a visibly better condition after the fire
Numerical modelling of composite floor slabs subject to large defections
This paper is concernedwith the ultimate behaviour of composite floor slabs. Steel/concrete composite structures are increasingly common in the UK and worldwide, particularly for multi-storey construction. The popularity of this construction formis mainly due to the excellent efficiency offered in terms of structural behaviour, construction time and material usage all of which are particularly attractive given the ever-increasing demands for improved sustainability in construction. In this context, the engineering research community has focused considerable effort in recent years towards understanding the response of composite structures during extreme events, such as fires. In particular, the contribution made by the floor slab system is of crucial importance as its ability to undergo secondary load-carrying mechanisms (e.g. membrane action) once conventional strength limits have been reached may prevent overall collapse of the structure. Researchers have focused on developing the fundamental understanding of the complex behaviour of floor slabs and also improving themethods of analysis. Building on thiswork, the current paper describes the development and validation of a finite element model which can simulate the response of floor slab systems until failure, both at ambient and elevated temperature. The model can represent the complexities of the behaviour including the temperature-dependent material and geometric nonlinearities. It is first developed at ambient temperature and validated using a series of experiments on isolated slab elements. The most salient parameters are identified and studied. Thereafter, the model is extended to include the effects of elevated temperature so it can be employed to investigate the behaviour under these conditions. Comparisons with current design procedures are assessed and discussed
Experimental and numerical study of temperature developments of composite joints between concrete-encased concrete-filled steel tube columns and reinforced concrete beams
Recommended from our members
Fire Resistance of Unprotected Ultra Shallow Floor Beams (USFB): A Numerical Investigation
This paper presents the fire resistance behaviour of partially encased in concrete ultra shallow floor beams (USFB) using numerical analysis method based on material specifications of the EN1994-1-2. Investigating the behaviour of USFBs under elevated temperatures is crucial in determining their fire resistance and evaluating their overall performance in contemporary construction. Even though the manufacturing company provides fire resistances for USFBs based on EC4-1-2 procedures, their response to elevated temperature effects remains up to date neither well documented nor clearly understood. The analyses involved two different beams of span 5 m and 8 m respectively, as specified by the manufacturer. Analysis results showed that such beams, when unprotected, experience severe temperature gradients if exposed to fire, as the lower flange still remains unprotected in contrast to the concrete encased part of the cross-section. As it was anticipated, the moment capacity governs the fire resistance of the beams and the load factor highly effects the elevated temperature behaviour. In addition, the loss of the lower flange, which develops high temperatures, is not compensated by the web and consequently the moment capacity ultimately depends on the temperature of the lower flange. Results also suggest that simulated beams sustained the applied load for approximately 40 min of exposure to the standard fire
Thermal behaviour of blind-bolted connections to hollow and concrete-filled steel tubular columns
This paper reports on the thermal analysis of blind-bolts connected to concrete filled steel tube (CFST) and hollow steel section (HSS) columns. The aim is therefore the investigation of the temperature distribution in the connected sections and the evaluation of the effects due to concrete filling and anchored bolt extension. For this purpose, experimental and numerical work was carried out. The test programme involved twelve small- scale unloaded specimens where the variables were: tube section dimensions, type of blind-bolt, and hollow or concrete filled steel tubes. Results from the experiments revealed the noteworthy effect of concrete on bolt temperature reduction, the insignificant influence of tube section dimensions, and the limited impact of embedded bolt extension. Finite element models (FEM) of connections were developed to simulate the behaviour of tested pieces. Comparison with tests allowed the calibration of thermal material properties and characteristics of heat flux in interactions. Furthermore, assessments of heat transfer problem on the simulation of small-scale pieces extended to the numerical model of the whole endplate connection between an I-beam and a tubular column. Finally, the suitability of simple methods from Eurocode 3 Part 1.2 and other references to obtain the temperature on the connection was evaluated
Post-fire behaviour of reinforced concrete stub columns confined by circular steel tubes
Experimental studies of gypsum plasterboards and composite panels under fire conditions
Gypsum plasterboards are commonly used to protect the light gauge steel-framed walls in buildings from fires. Single or multiple plasterboards can be used for this purpose, whereas recent research has proposed a composite panel with a layer of external insulation between two plasterboards. However, a good understanding of the thermal behaviour of these plasterboard panels under fire conditions is not known. Therefore, 15 small-scale fire tests were conducted on plasterboard panels made of 13 and 16 mm plasterboards and four different types of insulations with varying thickness and density subject to standard fire conditions in AS 1530.4. Fire performance of single and multiple layers of gypsum plasterboards was assessed including the effects of interfaces between adjacent plasterboards. Effects of using external insulations such as glass fibre, rockwool and cellulose fibre were also determined. The thermal performance of composite panels developed from different insulating materials of varying densities and thicknesses was examined and compared. This paper presents the details of the fire tests conducted in this study and their valuable time–temperature data for the tested plasterboard panels. These data can be used for the purpose of developing and validating accurate thermal numerical models of these panels
Predicting the behavior of welded angle connections in fire using artificial neural network
- …