Optimal C-type Filter for Harmonics Mitigation and Resonance Damping in Industrial Distribution Systems

Single-tuned passive filters offer reasonable mitigation for harmonic distortion at a specific harmonic frequency with a high filtering percentage, but resonance hazards exist. Traditional damped filters offer high-pass filtering for the high-frequency range, but suffer from extra ohmic losses. C-type filters may operate in a manner similar to the tuned filters with low damping losses and marginal resonance damping capabilities. Also, they can be designed as damped filters with increased resonance damping capability. In this paper, a methodology that facilitates sizing for the C-type damped filter parameters for harmonics mitigation and resonance damping in balanced distribution system networks, is presented and discussed using the impedance-frequency index. This index evaluates the resonance damping capability provided by the damped filters analytically rather than the conventional graphical method of impedance-frequency scanning. It shows how to size shunt passive filters, while making a full use of their damping capabilities. It can disclose the parallel resonance frequencies of the equivalent system-filter impedance. A comparative study of the new approach and a conventional filter design approach, which aims to minimize total harmonic current distortion, is presented. Numerous simulation results are provided to clarify the proposed methodology, advantages, and disadvantages

The Evolution of Compact Binary Star Systems

We review the formation and evolution of compact binary stars consisting of white dwarfs (WDs), neutron stars (NSs), and black holes (BHs). Binary NSs and BHs are thought to be the primary astrophysical sources of gravitational waves (GWs) within the frequency band of ground-based detectors, while compact binaries of WDs are important sources of GWs at lower frequencies to be covered by space interferometers (LISA). Major uncertainties in the current understanding of properties of NSs and BHs most relevant to the GW studies are discussed, including the treatment of the natal kicks which compact stellar remnants acquire during the core collapse of massive stars and the common envelope phase of binary evolution. We discuss the coalescence rates of binary NSs and BHs and prospects for their detections, the formation and evolution of binary WDs and their observational manifestations. Special attention is given to AM CVn-stars -- compact binaries in which the Roche lobe is filled by another WD or a low-mass partially degenerate helium-star, as these stars are thought to be the best LISA verification binary GW sources.Comment: 105 pages, 18 figure

EUD-MARS: End-User Development of Model-Driven Adaptive Robotics Software Systems

Empowering end-users to program robots is becoming more significant. Introducing software engineering principles into end-user programming could improve the quality of the developed software applications. For example, model-driven development improves technology independence and adaptive systems act upon changes in their context of use. However, end-users need to apply such principles in a non-daunting manner and without incurring a steep learning curve. This paper presents EUD-MARS that aims to provide end-users with a simple approach for developing model-driven adaptive robotics software. End-users include people like hobbyists and students who are not professional programmers but are interested in programming robots. EUD-MARS supports robots like hobby drones and educational humanoids that are available for end-users. It offers a tool for software developers and another one for end-users. We evaluated EUD-MARS from three perspectives. First, we used EUD-MARS to program different types of robots and assessed its visual programming language against existing design principles. Second, we asked software developers to use EUD-MARS to configure robots and obtained their feedback on strengths and points for improvement. Third, we observed how end-users explain and develop EUD-MARS programs, and obtained their feedback mainly on understandability, ease of programming, and desirability. These evaluations yielded positive indications of EUD-MARS

Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables

It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)

A922 Sequential measurement of 1 hour creatinine clearance (1-CRCL) in critically ill patients at risk of acute kidney injury (AKI)

Meeting abstrac

Defining the causes of sporadic Parkinson’s disease in the global Parkinson’s genetics program (GP2)

\ua9 2023, Springer Nature Limited. The Global Parkinson’s Genetics Program (GP2) will genotype over 150,000 participants from around the world, and integrate genetic and clinical data for use in large-scale analyses to dramatically expand our understanding of the genetic architecture of PD. This report details the workflow for cohort integration into the complex arm of GP2, and together with our outline of the monogenic hub in a companion paper, provides a generalizable blueprint for establishing large scale collaborative research consortia