171 research outputs found
Coupling engineering of Saccharomyces cerevisiae with medium optimization for the production of ergothioneine
Ergothioneine (ERG) is a naturally occurring, exogenous antioxidant that is nonetheless abundant in the human body. It has been shown both to reduce oxidative damage and to be involved in several diseases in vivo1,2. Therefore, ergothioneine is poised to take a place in the dietary supplement industry. Here we describe the engineering of the yeast Saccharomyces cerevisiae and subsequent medium optimization to produce ergothioneine by fermentation. After integrating combinations of biosynthetic pathways from different organisms, we screened yeast strains for their production of ERG. Next, the highest producing strain was engineered with ergothioneine transporters, and its amino acid metabolism was altered by knock-out of Tor1 or Yih1. The bottleneck for ergothioneine production was determined by integration of a second copy of the pathway enzymes. We also optimized the media composition for production of ergothioneine using yeast S. cerevisiae. Following these manipulations, we obtained a titer of 630 mg/l in fed-batch cultivation in bioreactors. This work shows that with further engineering of the strain, current chemical synthesis of ergothioneine could be replaced with a sustainable alternative. 1. Cheah, I. K. & Halliwell, B. Ergothioneine; antioxidant potential, physiological function and role in disease. Biochim. Biophys. Acta - Mol. Basis Dis. 1822, 784â793 (2012). 2. Halliwell, B., Cheah, I. K. & Tang, R. M. Y. Ergothioneine - a diet-derived antioxidant with therapeutic potential. FEBS Lett. (2018). doi:10.1002/1873-3468.1312
Adhesive and conformational behaviour of mycolic acid monolayers
We have studied the pH-dependent interaction between mycolic acid (MA) monolayers and hydrophobic and hydrophilic surfaces using molecular (colloidal probe) force spectroscopy. In both cases, hydrophobic and hydrophilic monolayers (prepared by Langmuir-Blodgett and Langmuir-Schaefer deposition on silicon or hydrophobized silicon substrates, respectively) were studied. The force spectroscopy data, fitted with classical DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory to examine the contribution of electrostatic and van der Waals forces, revealed that electrostatic forces are the dominant contribution to the repulsive force between the approaching colloidal probe and MA monolayers. The good agreement between data and the DLVO model suggest that beyond a few nm away from the surface, hydrophobic, hydration, and specific chemical bonding are unlikely to contribute to any significant extent to the interaction energy between the probe and the surface. The pH-dependent conformation of MA molecules in the monolayer at the solid-liquid interface was studied by ellipsometry, neutron reflectometry, and with a quartz crystal microbalance. Monolayers prepared by the Langmuir-Blodgett method demonstrated a distinct pH-responsive behaviour, while monolayers prepared by the Langmuir-Schaefer method were less sensitive to pH variation. It was found that the attachment of water molecules plays a vital role in determining the conformation of the MA monolayers. (C) 2010 Elsevier B.V. All rights reserved
OpdA, a bacterial organophosphorus hydrolase, prevents lethality in rats after poisoning with highly toxic organophosphorus pesticides
Organophosphorus (OP) pesticides poison more than 3,000,000 people every year in the developing world, mostly through intentional self-poisoning. Advances in medical therapy for OP poisoning have lagged, and current treatment is not highly effective with mortality of up to 40% in even the most advanced Western medical facilities. Administration of a broadly active bacterial OP hydrolase to patients in order to hydrolyze OPs in circulation might allow current therapies to be more effective. The objective of this work was to evaluate the efficacy of a new recombinant bacterial OP hydrolase (OpdA), cloned from Agrobacterium radiobacter, in rat models of two chemically distinct but highly toxic and rapidly acting OP pesticides: dichlorvos and parathion. Without OpdA treatment, median time to death in rats poisoned with 3x LD(50) of dichlorvos or parathion was 6 min and 25.5 min, respectively. Administration of a single dose of OpdA immediately after dichlorvos resulted in 100% survival at 24h, with no additional antidotal therapy. After parathion poisoning, OpdA alone caused only a delay to death. However, an additional two doses of OpdA resulted in 62.5% survival at 24 h after parathion poisoning. In combination with pralidoxime therapy, a single dose of OpdA increased survival to 75% after parathion poisoning. Our results demonstrate that OpdA is able to improve survival after poisoning by two chemically distinct and highly toxic OP pesticides
A single-dose comparison of the acute effects between the new somatostatin analog SOM230 and octreotide in acromegalic patients
Treatment with the somatostatin receptor (sst) subtype 2 predominant
analogs octreotide and lanreotide induces clinical and biochemical cure in
approximately 65% of acromegalic patients. GH-secreting pituitary
adenomas, which are not controlled, also express sst(5). We compared the
acute effects of octreotide and SOM230, a new somatostatin analog with
high affinity for sst(1,2,3,5) on hormone release in acromegalic patients.
In a single-dose, proof-of-concept study, 100 microg octreotide and 100
and 250 microg SOM230 were given s.c. to 12 patients with active
acromegaly. Doses of 100 and 250 microg SOM230 dose-dependently suppressed
GH levels from 2-8 h after administration (-38 +/- 7.7 vs. -61 +/- 6.7%,
respectively; P < 0.01). A comparable suppression of GH levels by
octreotide and 250 microg SOM230 was observed in eight patients (-65 +/- 7
vs. -72 +/- 7%, respectively). In three patients, the acute GH-lowering
effect of 250 microg SOM230 was significantly superior to that of
octreotide (-70 +/- 2 vs. -17 +/- 15%, respectively; P < 0.01). In one
patient, the GH-lowering effect of octreotide was better than that of
SOM230. Tolerability for SOM230 was good. Glucose levels were initially
slightly elevated after octreotide and SOM230, compared with control day,
whereas insulin levels were only significantly suppressed by octreotide.
We conclude that SOM230 is an effective GH-lowering drug in acromegalic
patients with the potential to increase the number of patients controlled
during long-term medical treatment
Topological susceptibility with the improved Asqtad action
As a test of the chiral properties of the improved Asqtad (staggered fermion)
action, we have been measuring the topological susceptibility as a function of
quark masses for 2 + 1 dynamical flavors. We report preliminary results, which
show reasonable agreement with leading order chiral perturbation theory for
lattice spacing less than 0.1 fm. The total topological charge, however, shows
strong persistence over Monte Carlo time.Comment: Lattice2002(algor
Recommended from our members
The Global Gridded Crop Model Intercomparison phase 1 simulation dataset
The Global Gridded Crop Model Intercomparison (GGCMI) phase 1 dataset of the Agricultural Model Intercomparison and Improvement Project (AgMIP) provides an unprecedentedly large dataset of crop model simulations covering the global ice-free land surface. The dataset consists of annual data fields at a spatial resolution of 0.5 arc-degree longitude and latitude. Fourteen crop modeling groups provided output for up to 11 historical input datasets spanning 1901 to 2012, and for up to three different management harmonization levels. Each group submitted data for up to 15 different crops and for up to 14 output variables. All simulations were conducted for purely rainfed and near-perfectly irrigated conditions on all land areas irrespective of whether the crop or irrigation system is currently used there. With the publication of the GGCMI phase 1 dataset we aim to promote further analyses and understanding of crop model performance, potential relationships between productivity and environmental impacts, and insights on how to further improve global gridded crop model frameworks. We describe dataset characteristics and individual model setup narratives. © 2019, The Author(s)
How Do Various Maize Crop Models Vary in Their Responses to Climate Change Factors?
Potential consequences of climate change on crop production can be studied using mechanistic crop simulation models. While a broad variety of maize simulation models exist, it is not known whether different models diverge on grain yield responses to changes in climatic factors, or whether they agree in their general trends related to phenology, growth, and yield. With the goal of analyzing the sensitivity of simulated yields to changes in temperature and atmospheric carbon dioxide concentrations [CO2], we present the largest maize crop model intercomparison to date, including 23 different models. These models were evaluated for four locations representing a wide range of maize production conditions in the world: Lusignan (France), Ames (USA), Rio Verde (Brazil) and Morogoro (Tanzania). While individual models differed considerably in absolute yield simulation at the four sites, an ensemble of a minimum number of models was able to simulate absolute yields accurately at the four sites even with low data for calibration, thus suggesting that using an ensemble of models has merit. Temperature increase had strong negative influence on modeled yield response of roughly -0.5 Mg ha(sup 1) per degC. Doubling [CO2] from 360 to 720 lmol mol 1 increased grain yield by 7.5% on average across models and the sites. That would therefore make temperature the main factor altering maize yields at the end of this century. Furthermore, there was a large uncertainty in the yield response to [CO2] among models. Model responses to temperature and [CO2] did not differ whether models were simulated with low calibration information or, simulated with high level of calibration information
- âŠ