3D Stress Fields Versus Void Distributions Ahead of a Notch Tip for Semi-crystalline Polymers

The creep durability of engineering structures relies on the theory of Fracture Mechanics for Creeping Solids (FMCS). The studied material is a semi-crystalline polymer. The lifespan of plastic pipes being generally specified in terms of years of service, its prediction requires reliable constitutive models accounting for time dependent deformation under multiaxial stress states and failure criteria based on the mechanisms of damage and failure. Here, an experimental approach was developed so as to analyze the mechanisms of deformation and cavitation at the microstructural scale by using 3D imaging (tomography/laminography). Three stress triaxiality ratios were addressed using various notched specimen geometries. The void characteristic dimensions (volume fraction, height and diameter) were then measured by defining a volume of interest. The spatial distributions of these characteristics at a prescribed creep time were observed to be dependent on the stress triaxiality ratio. A finite element constitutive model using the porosity as an internal variable, was selected. Comparison of the multiscale experimental database with those simulated at the macroscopic scale as well as at the microstructure level was satisfactory. In the light of the finite element results, the principal stress singularities were in good agreement with the void characteristic lengths

Neglect of the histological diagnostics of onychomycosis – the best would be so easy

(...

Multi-contrast computed laminography at ANKA light source

X-ray computed laminography has been developed as a non-destructive imaging technique for inspecting laterally extended objects. Benefiting from a parallel-beam geometry, high photon flux of synchrotron sources and modern high-resolution detector systems, synchrotron radiation computed laminography (SRCL) results in a powerful three-dimensional microscopy technique. SRCL can be combined with different contrast modes, such as absorption, phase and dark-field contrasts, in order to provide complementary information for the same specimen. Here we show the development of SRCL at the TopoTomo beamline of the ANKA light source. A novel instrumentation design is reported and compared to the existing one. For this design, experimental results from different contrast modalities are shown

Electromigration Mechanism of Failure in Flip-Chip Solder Joints Based on Discrete Void Formation

In this investigation, SnAgCu and SN100C solders were electromigration (EM) tested, and the 3D laminography imaging technique was employed for in-situ observation of the microstructure evolution during testing. We found that discrete voids nucleate, grow and coalesce along the intermetallic compound/solder interface during EM testing. A systematic analysis yields quantitative information on the number, volume, and growth rate of voids, and the EM parameter of DZ*. We observe that fast intrinsic diffusion in SnAgCu solder causes void growth and coalescence, while in the SN100C solder this coalescence was not significant. To deduce the current density distribution, finite-element models were constructed on the basis of the laminography images. The discrete voids do not change the global current density distribution, but they induce the local current crowding around the voids: this local current crowding enhances the lateral void growth and coalescence. The correlation between the current density and the probability of void formation indicates that a threshold current density exists for the activation of void formation. There is a significant increase in the probability of void formation when the current density exceeds half of the maximum value

Editors’ choice—4D neutron and X-ray tomography studies of high energy density primary batteries: Part II. multi-modal microscopy of LiSOCl2 cells

The ability to track electrode degradation, both spatially and temporally, is fundamental to understand performance loss during operation of lithium batteries. X-ray computed tomography can be used to follow structural and morphological changes in electrodes; however, the direct detection of electrochemical processes related to metallic lithium is difficult due to the low sensitivity to the element. In this work, 4-dimensional neutron computed tomography, which shows high contrast for lithium, is used to directly quantify the lithium diffusion process in spirally wound Li/SOCl$_{2}$ primary cells. The neutron dataset enables the quantification of the lithium transport from the anode and the accumulation inside the SOCl$_{2}$ cathode to be locally resolved. Complementarity between the collected neutron and X-ray computed tomographies is shown and by applying both methods in concert we have observed lithium diffusion blocking by the LiCl protection layer and identified all cell components which are difficult to distinguish using one of the methods alone

Heterogeneity of the osteocyte lacuno-canalicular network architecture and material characteristics across different tissue types in healing bone

Various tissue types, including fibrous connective tissue, bone marrow, cartilage, woven and lamellar bone coexist in healing bone. Similar to all bone tissue type, healing bone contains a lacuno-canalicular network (LCN) housing osteocytes that are known to orchestrate bone remodeling in healthy bone by sensing mechanical strains and translating them into biochemical signals. The structure of the LCN is also hypothesized to influence mineralization processes. Hence, the aim of the present study was to visualize and correlate spatial variations in the LCN topology with mineral characteristics, within and at the interfaces of the different tissue types that comprise healing bone. We applied a correlative multi-method approach to visualize the LCN architecture and quantify mineral particle size and orientation within healing femoral bone in a mouse osteotomy model (26 weeks old C57BL/6 mice). This approach revealed structural differences across several length scales during endochondral ossification within the following regions: calcified cartilage, bony callus, cortical bone and the transition zone between the cortical region and callus that developed during 21 days after the osteotomy. In this transition zone, we observed a continuous convergence of mineral characteristics and osteocyte lacunae shape as well as discontinuities in the lacunae volume and LCN connectivity. The bony callus exhibits a 34% higher lacunae number density with 40% larger lacunar volume compared to cortical bone. The presented correlations between LCN architecture and mineral characteristics improves our understanding of how bone develops during healing and may indicate a contribution of osteocytes to bone (re)modeling

Combined neutron and x-ray tomography—a versatile and non-destructive tool in planetary geosciences

With several upcoming sample return missions, such as the Mars Sample Return Campaign, non-destructive methods will be key to maximizing their scientific output. In this study, we demonstrate that the combination of neutron and X-ray tomography provides an important tool for the characterization of such valuable samples. These methods allow quantitative analyses of internal sample features and also provide a guide for further destructive analyses with little to no sample treatment, which maintains sample integrity, including minimizing the risk of potential contamination. Here, we present and review the results from four case studies of terrestrial impactites and meteorites along with their analytical setup. Using combined X-ray and neutron tomography, a Ni-Fe silicide spherule, that is, projectile material, was located within a Libyan Desert Glass sample and the distribution of hydrous phases was pinpointed in selected impactite samples from the Chicxulub IODP-ICDP Expedition 364 drill core and the Luizi impact structure, as well as in the Miller Range 03346 Martian meteorite