431 research outputs found
Development and AFM study of porous scaffolds for wound healing applications
An engineering approach to the development of biomaterials for promotion of wound healing emphasises the importance
of a well-controlled architecture and concentrates on optimisation of morphology and surface chemistry to stimulate
guidance of the cells within the wound environment. A series of three-dimensional porous scaffolds with 80–90% bulk porosity
and fully interconnected macropores were prepared from two biodegradable materials – cellulose acetate (CA) and poly (lacticco-glycolic
acid) (PLGA) through the phase inversion mechanism of formation. Surface morphology of obtained scaffolds
was determined using atomic force microscopy (AFM) in conjunction with optical microscopy. Scanning Electron Microscopy
(SEM) was applied to characterise scaffolds bulk morphology. Biocompatibility and biofunctionality of the prepared materials
were assessed through a systematic study of cell/material interactions using atomic force microscopy (AFM) methodologies together
with in vitro cellular assays. Preliminary data with human fibroblasts demonstrated a positive influence of both scaffolds
on cellular attachment and growth. The adhesion of cells on both biomaterials were quantified by AFM force measurements in
conjunction with a cell probe technique since, for the first time, a fibroblast probe has been successfully developed and optimal
conditions of immobilisation of the cells on the AFM cantilever have been experimentally determined
A new compact soft x ray spectrometer for resonant inelastic x ray scattering studies at PETRA III
We present a newly designed compact grating spectrometer for the energy range from 210 eV to 1250 eV, which would include the K amp; 945;1,2 emission lines of vital elements like C, N, and O. The spectrometer is based on a grazing incidence spherical varied line spacing grating with 2400 l mm at its center and a radius of curvature of 58 542 mm. First, results show a resolving power of around 1000 at an energy of 550 eV and a working spectrometer for high vacuum 10 amp; 8722;4 mbar environment without losing photon intensit
The fermi arc and fermi pocket in cuprates in a short-range diagonal stripe phase
In this paper we studied the fermi arc and the fermi pocket in cuprates in a
short-range diagonal stripe phase with wave vectors , which
reproduce with a high accuracy the positions and sizes of the fermi arc and
fermi pocket and the superstructure in cuprates observed by Meng et
al\cite{Meng}. The low-energy spectral function indicates that the fermi pocket
results from the main band and the shadow band at the fermi energy. Above the
fermi energy the shadow band gradually departs away from the main band, leaving
a fermi arc. Thus we conclude that the fermi arc and fermi pocket can be fully
attributed to the stripe phase but has nothing to do with pairing.
Incorporating a d-wave pairing potential in the stripe phase the spectral
weight in the antinodal region is removed, leaving a clean fermi pocket in the
nodal region.Comment: 5 pages, 6 figure
Collimation of high current fast electrons in dense plasmas with a tightly focused precursor intense laser pulse
High-current fast electrons at the mega-ampere level provide a unique way to generate high-energy density states of matter, which are related to many applications. However, the large divergence angle of fast electrons typically over 50 degrees is a significant disadvantage. The guiding effect of the self-generated azimuthal magnetic fields on fast electron current is found to be very limited due to the cone-shaped spatial structure of the fields. In this work, we present a new understanding of the collimation conditions of fast electrons under such a magnetic field structure. It is shown that the transverse peak position of the magnetic field layer plays a more crucial role in collimating the fast electrons than its magnitude. Based upon this, a new two-pulse collimating scheme is proposed, where a guiding precursor pulse is adopted to form proper azimuthal magnetic fields and the main pulse is for fast electron generation as usual. The present scheme can be implemented relatively easily with the precursor lasers at the 10 TW level with a duration of 200 femtoseconds, with which the divergence angle of fast electrons driven by the main pulse can be confined within a few degrees. Practical applications of our scheme can be found in high-energy density science
Search for a scalar or vector particle decaying into Zgamma in ppbar collisions at sqrt(s) = 1.96 TeV
We present a search for a narrow scalar or vector resonance decaying into
Zgamma with a subsequent Z decay into a pair of electrons or muons. The data
for this search were collected with the D0 detector at the Fermilab Tevatron
ppbar collider at a center of mass energy sqrt(s) = 1.96 TeV. Using 1.1 (1.0)
fb-1 of data, we observe 49 (50) candidate events in the electron (muon)
channel, in good agreement with the standard model prediction. From the
combination of both channels, we derive 95% C.L. upper limits on the cross
section times branching fraction (sigma x B) into Zgamma. These limits range
from 0.19 (0.20) pb for a scalar (vector) resonance mass of 600 GeV/c^2 to 2.5
(3.1) pb for a mass of 140 GeV/c^2.Comment: Published by Phys. Lett.
Search for the standard model Higgs boson in tau final states
We present a search for the standard model Higgs boson using hadronically
decaying tau leptons, in 1 inverse femtobarn of data collected with the D0
detector at the Fermilab Tevatron ppbar collider. We select two final states:
tau plus missing transverse energy and b jets, and tau+ tau- plus jets. These
final states are sensitive to a combination of associated W/Z boson plus Higgs
boson, vector boson fusion and gluon-gluon fusion production processes. The
observed ratio of the combined limit on the Higgs production cross section at
the 95% C.L. to the standard model expectation is 29 for a Higgs boson mass of
115 GeV.Comment: publication versio
Hypertensive conditions of pregnancy, preterm birth, and premenopausal breast cancer risk: a premenopausal breast cancer collaborative group analysis
Purpose: Women with preeclampsia are more likely to deliver preterm. Reports of inverse associations between preeclampsia and breast cancer risk, and positive associations between preterm birth and breast cancer risk are difficult to reconcile. We investigated the co-occurrence of preeclampsia/gestational hypertension with preterm birth and breast cancer risk using data from the Premenopausal Breast Cancer Collaborative Group. Methods: Across 6 cohorts, 3096 premenopausal breast cancers were diagnosed among 184,866 parous women. We estimated multivariable hazard ratios (HR) and 95% confidence intervals (CI) for premenopausal breast cancer risk using Cox proportional hazards regression. Results: Overall, preterm birth was not associated (HR 1.02, 95% CI 0.92, 1.14), and preeclampsia was inversely associated (HR 0.86, 95% CI 0.76, 0.99), with premenopausal breast cancer risk. In stratified analyses using data from 3 cohorts, preterm birth associations with breast cancer risk were modified by hypertensive conditions in first pregnancies (P-interaction = 0.09). Preterm birth was positively associated with premenopausal breast cancer in strata of women with preeclampsia or gestational hypertension (HR 1.52, 95% CI: 1.06, 2.18), but not among women with normotensive pregnancy (HR = 1.09, 95% CI: 0.93, 1.28). When stratified by preterm birth, the inverse association with preeclampsia was more apparent, but not statistically different (P-interaction = 0.2), among women who did not deliver preterm (HR = 0.82, 95% CI 0.68, 1.00) than those who did (HR = 1.07, 95% CI 0.73, 1.56). Conclusion: Findings support an overall inverse association of preeclampsia history with premenopausal breast cancer risk. Estimates for preterm birth and breast cancer may vary according to other conditions of pregnancy
Modeling of Ti-W Solidification Microstructures Under Additive Manufacturing Conditions
Additive manufacturing (AM) processes have many benefits for the fabrication of alloy parts, including the potential for greater microstructural control and targeted properties than traditional metallurgy processes. To accelerate utilization of this process to produce such parts, an effective computational modeling approach to identify the relationships between material and process parameters, microstructure, and part properties is essential. Development of such a model requires accounting for the many factors in play during this process, including laser absorption, material addition and melting, fluid flow, various modes of heat transport, and solidification. In this paper, we start with a more modest goal, to create a multiscale model for a specific AM process, Laser Engineered Net Shaping (LENS™), which couples a continuum-level description of a simplified beam melting problem (coupling heat absorption, heat transport, and fluid flow) with a Lattice Boltzmann-cellular automata (LB-CA) microscale model of combined fluid flow, solute transport, and solidification. We apply this model to a binary Ti-5.5 wt pct W alloy and compare calculated quantities, such as dendrite arm spacing, with experimental results reported in a companion paper
Strategies for Controlled Placement of Nanoscale Building Blocks
The capability of placing individual nanoscale building blocks on exact substrate locations in a controlled manner is one of the key requirements to realize future electronic, optical, and magnetic devices and sensors that are composed of such blocks. This article reviews some important advances in the strategies for controlled placement of nanoscale building blocks. In particular, we will overview template assisted placement that utilizes physical, molecular, or electrostatic templates, DNA-programmed assembly, placement using dielectrophoresis, approaches for non-close-packed assembly of spherical particles, and recent development of focused placement schemes including electrostatic funneling, focused placement via molecular gradient patterns, electrodynamic focusing of charged aerosols, and others
Measurement of the ttbar production cross section and top quark mass extraction using dilepton events in ppbar collisions
We present a measurement of the top quark pair production cross section in
ppbar collisions at \sqrt{s}=1.96 TeV using approximately 1 fb^{-1} of data
collected with the D0 detector. We consider decay channels containing two high
pt charged leptons where one lepton is identified as an electron or a muon
while the other lepton can be an electron, a muon or a hadronically decaying
tau lepton. For a mass of the top quark of 170 GeV, the measured cross section
is 7.5 +1.0-1.0 (stat) +0.7-0.6 (syst) +0.6-0.5 (lumi) pb. Using lepton+tau
events only, we measure: \sigma_ttbar \times B(ttbar to ltau bbbar) = 0.13
+0.09-0.08 (stat) +0.06-0.06 (syst) +0.02-0.02 (lumi) pb. Comparing the
measured cross section as a function of the mass of the top quark with a
partial next-to-next-to leading order Quantum Chromodynamics theoretical
prediction, we extract a mass of the top quark of 171.5 +9.9-8.8 GeV, in
agreement with direct measurements.Comment: published in Phys. Lett. B, 10 pages, 7 figure
- …