A Case Study for Financial Feasibility of Automated Costing Support in A Small Machine Shop

A knowledge-based cost estimating expert system is chosen by a Mexican machine shop. Differences between the traditional experience-based system employed and the automated system are studied. Data is gathered to analyze time effectiveness, accuracy and payback of the software. Data from seventy part models is recorded to study the time experiment, and data from fifty part models is used to study the accuracy and consistency. Data is analyzed by calculating mean, standard deviation, and test of hypothesis. The results indicate that the software is faster than the traditional quoting system; however, the payback point is high. Also, results show the software has a smaller average time-to-manufacture percentage difference between the automated system and the actual time-to-manufacture (TTM) compared to the percentage difference between the traditional’s TTM and actual TTMs, and this difference is statistically significant. The standard deviation for the automated system is also less implying better consistency

Benefits of Implementing Automated Costing in a Small Machine Shop: A Case Study

Knowledge based cost estimating systems are available, but is there a lower limit to their applicability in an industrial environment?  This paper answers this question by examining a knowledge based cost estimating expert system application in a small machine shop.  Differences between the traditional experienced-based system currently employed and the automated system are studied.  Data is gathered to analyze time effectiveness, accuracy, and payback of the software.  Data from seventy part models is recorded to study the time experiment and data from fifty part models is used to study accuracy and consistency.The results indicate that the software is faster than traditional quoting systems; however, the payback point is high. Also, results show that the software has a smaller average time to manufacture percent difference between the automated system and the actual time to manufacture (TTM) compared to the percentage difference between the traditional TTM and actual TTM. Standard deviation for the automation is also less, implying better consistency.  As a result, the attractiveness of the automated system in the limiting case of a small machine shop rests with significantly improved accuracy and consistency rather than payback.

PVDF/BaTiO3/carbon nanotubes ternary nanocomposites prepared by ball milling: Piezo and dielectric responses

Nanocomposites based on poly(vinylidene fluoride) (PVDF) filled with barium titanate, BaTiO3, (BT) particles, and multiwalled carbon nanotubes (MWCNTs) were prepared by high-energy ball milling (HEBM) and subsequent hot pressing. This method of materials preparation allowed obtaining uniform dispersions of the nanofillers. The influence of the particles on the polymer structure and morphology was studied. To understand the origin of changes in the PVDF properties, thermal and electrical behaviors of the PVDF/BT/MWCNT nanocomposites were studied as a function of composition. The addition of BT, MWCNT, or its mixture had not any influence on the PVDF polymorphism. However, calorimetric results pointed out that the presence of the nanofillers exerted nucleation mainly ascribed to the surface to volume ratio of the nanoparticles. The capacitance of the composites increased as the nanofiller content increased, being the effect mainly dependent on the surface to volume ratio of the nanoparticles. The dielectric behavior of the materials as a function of frequency was modeled by a Debye equivalent circuit only below the percolation threshold respect to the amount of MWCNT. The piezoelectric behavior of the ternary nanocomposites was highly affected by the incorporation of the nanofillers only when high dielectric losses occurred above the percolation threshold.The authors gratefully acknowledge the financial support from the Ministerio de Ciencia e Innovacion (MAT2010-16815) and the Ministerio de Asuntos Exteriores y de Cooperacion and the Agencia Espanola de Cooperacion Internacional para el Desarrollo for supporting the Ph.D. thesis of F.A.S

KV1.5–KV 1.3 Recycling Is PKC-Dependent

KV1.5 channel function is modified by different regulatory subunits. KVβ1.3 subunits assemble with KV1.5 channels and induce a fast and incomplete inactivation. Inhibition of PKC abolishes the KVβ1.3-induced fast inactivation, decreases the amplitude of the current KV1.5–KVβ1.3 and modifies their pharmacology likely due to changes in the traffic of KV1.5–KVβ1.3 channels in a PKC-dependent manner. In order to analyze this hypothesis, HEK293 cells were transfected with KV1.5–KVβ1.3 channels, and currents were recorded by whole-cell configuration of the patch-clamp technique. The presence of KV1.5 in the membrane was analyzed by biotinylation techniques, live cell imaging and confocal microscopy approaches. PKC inhibition resulted in a decrease of 33 ± 7% of channels in the cell surface due to reduced recycling to the plasma membrane, as was confirmed by confocal microscopy. Live cell imaging indicated that PKC inhibition almost abolished the recycling of the KV1.5–KVβ1.3 channels, generating an accumulation of channels into the cytoplasm. All these results suggest that the trafficking regulation of KV1.5–KVβ1.3 channels is dependent on phosphorylation by PKC and, therefore, they could represent a clinically relevant issue, mainly in those diseases that exhibit modifications in PKC activity.This research was funded by Ministerio de Ciencia e Innovación (MICINN) Spain SAF2016-75021-R and PID2019-104366RB-C21 (to C.V. and T.G.), the Instituto de Salud Carlos III CIBERCV program CB/11/00222 (to C.V.), and the Consejo Superior de Investigaciones Científicas grants: PIE 201820E104 and 2019AEP148 (to C.V.). The cost of this publication was paid in part by funds from the European Fund for Economic and Regional Development (FEDER). A.M. holds a postdoctoral contract at CNIC. A.d.l.C. and D.A.P. held CSIC contracts. A.d.B.-B. holds an MICINN predoctoral contract (BES-2017-080184

Resolving galaxies in time and space: II: Uncertainties in the spectral synthesis of datacubes

In a companion paper we have presented many products derived from the application of the spectral synthesis code STARLIGHT to datacubes from the CALIFA survey, including 2D maps of stellar population properties and 1D averages in the temporal and spatial dimensions. Here we evaluate the uncertainties in these products. Uncertainties due to noise and spectral shape calibration errors and to the synthesis method are investigated by means of a suite of simulations based on 1638 CALIFA spectra for NGC 2916, with perturbations amplitudes gauged in terms of the expected errors. A separate study was conducted to assess uncertainties related to the choice of evolutionary synthesis models. We compare results obtained with the Bruzual & Charlot models, a preliminary update of them, and a combination of spectra derived from the Granada and MILES models. About 100k CALIFA spectra are used in this comparison. Noise and shape-related errors at the level expected for CALIFA propagate to 0.10-0.15 dex uncertainties in stellar masses, mean ages and metallicities. Uncertainties in A_V increase from 0.06 mag in the case of random noise to 0.16 mag for shape errors. Higher order products such as SFHs are more uncertain, but still relatively stable. Due to the large number statistics of datacubes, spatial averaging reduces uncertainties while preserving information on the history and structure of stellar populations. Radial profiles of global properties, as well as SFHs averaged over different regions are much more stable than for individual spaxels. Uncertainties related to the choice of base models are larger than those associated with data and method. Differences in mean age, mass and metallicity are ~ 0.15 to 0.25 dex, and 0.1 mag in A_V. Spectral residuals are ~ 1% on average, but with systematic features of up to 4%. The origin of these features is discussed. (Abridged)Comment: A&A, accepte

Use of Schizosaccharomyces strains for wine fermentation? Effect on the wine composition and food safety

Schizosaccharomyceswas initially considered as a spoilage yeast because of the production of undesirable metabolites such as acetic acid, hydrogen sulfide, or acetaldehyde, but it currently seems to be of great value in enology.o ced Nevertheless, Schizosaccharomyces can reduce all of the malic acid in must, leading to malolactic fermentation. Malolactic fermentation is a highly complicated process in enology and leads to a higher concentration of biogenic amines, so the use of Schizosaccharomyces pombe can be an excellent tool for assuring wine safety. Schizosaccharomyces also has much more potential than only reducing the malic acid content, such as increasing the level of pyruvic acid and thus the vinylphenolic pyranoanthocyanin content. Until now, few commercial strains have been available and little research on the selection of appropriate yeast strains with such potential has been conducted. In this study, selected and wild Sc. pombe strains were used along with a Saccharomyces cerevisiae strain to ferment red grape must. The results showed significant differences in several parameters including non-volatile and volatile compounds, anthocyanins, biogenic amines and sensory parameters

Complementarity effects on tree growth are contingent on tree size and climatic conditions across Europe

Although sustainable development was defined in the Brundtland Report almost 30 years ago, the current usage of the concepts of sustainability and sustainable development remain highly equivocal. In the context of rural communities, multiple interpretations and weak definitions lead to confusion in understanding what comprises a sustainable rural community. Building on existing definitions (e.g. Baker's, 2006, ‘Ladder of Sustainable Development'), models (principally, The Egan Review's, 2004, ‘Components of Sustainable Communities') and findings of this study, a sustainable community is defined and a holistic model of a sustainable place-based rural community is presented. This model, the sustainable community design (SCD) is used as the basis for analysing community sustainability, which is measured using mixed methods and scorecard assessment. Sensitivity of the method is demonstrated with inter- and intra-community variations in sustainability across three diverse Scottish rural communities. Intra-community variations illustrate heterogeneity in community sustainability, explain ambiguity in characterisations of an individual community's sustainability, and highlight the importance of an interdisciplinary and holistic approach to community development. The SCD framework is presented as a useful tool for meso-level sustainability assessment and to facilitate the sustainable development of rural communities

Review of the life history and conservation of federally endangered plant species of the Lower Rio Grande Valley, Texas, USA

This review aims to summarize information critical to the conservation of the federally listed endangered species of South Texas, which occur along the border of Texas and Mexico. This paper describes the characteristics, habitat, population status, distribution, life history, threats, and restoration of endangered plant species of the Lower Rio Grande Valley, Texas, which includes Cameron, Willacy, Hidalgo, and Starr County. Seven federally listed species are considered including Ambrosia cheiranthifolia, Asclepias prostrata, Astrophytum asterias, Ayenia limitaris, Manihot walkerae, Lesquerella thamnophila (syn. Physaria thamnophila), and Thymophylla tephroleuca. An eighth species, Physostegia correllii is under consideration for federal listing by the U.S. Fish and Wildlife Service. This paper assembles information on the background, biological status, major threats, and conservation to aid managers and the scientific community in restoring and managing these species. - El objetivo de esta revisión es resumir la información crítica para la conservación de las especies en peligro de extinción incluidas en la lista federal del sur de Texas, que se encuentran a lo largo de la frontera entre Texas y México. En este documento se describen las características, el hábitat, el estado de la población, la distribución, el ciclo biológico, las amenazas y la restauración de las especies vegetales en peligro de extinción del Valle Inferior del Río Grande, Texas, que incluye los condados de Cameron, Willacy, Hidalgo y Starr. Se consideran siete especies incluidas en la lista federal, entre ellas Ambrosia cheiranthifolia, Asclepias prostrata, Astrophytum asterias, Ayenia limitaris, Manihot walkerae, Lesquerella thamnophila (syn. Physaria thamnophila) y Thymophylla tephroleuca. Una octava especie, Physostegia correllii, está siendo considerada por el Servicio de Pesca y Vida Silvestre de EE.UU. para su inclusión en la lista federal. Este documento reúne información sobre los antecedentes, el estado biológico, las principales amenazas y la conservación para ayudar a los gestores y a la comunidad científica a restaurar y gestionar estas especies