Surface functionalisation of nanodiamonds for human neural stem cell adhesion and proliferation.

Biological systems interact with nanostructured materials on a sub-cellular level. These interactions may govern cell behaviour and the precise control of a nanomaterial's structure and surface chemistry allow for a high degree of tunability to be achieved. Cells are surrounded by an extra-cellular matrix with nano-topographical properties. Diamond based materials, and specifically nanostructured diamond has attracted much attention due to its extreme electrical and mechanical properties, chemical inertness and biocompatibility. Here the interaction of nanodiamond monolayers with human Neural Stem Cells (hNSCs) has been investigated. The effect of altering surface functionalisation of nanodiamonds on hNSC adhesion and proliferation has shown that confluent cellular attachment occurs on oxygen terminated nanodiamonds (O-NDs), but not on hydrogen terminated nanodiamonds (H-NDs). Analysis of H and O-NDs by Atomic Force Microscopy, contact angle measurements and protein adsorption suggests that differences in topography, wettability, surface charge and protein adsorption of these surfaces may underlie the difference in cellular adhesion of hNSCs reported here

Environmental variables, habitat discontinuity and life history shaping the genetic structure of Pomatoschistus marmoratus

Coastal lagoons are semi-isolated ecosystems exposed to wide fluctuations of environmental conditions and showing habitat fragmentation. These features may play an important role in separating species into different populations, even at small spatial scales. In this study, we evaluate the concordance between mitochondrial (previous published data) and nuclear data analyzing the genetic variability of Pomatoschistus marmoratus in five localities, inside and outside the Mar Menor coastal lagoon (SE Spain) using eight microsatellites. High genetic diversity and similar levels of allele richness were observed across all loci and localities, although significant genic and genotypic differentiation was found between populations inside and outside the lagoon. In contrast to the FST values obtained from previous mitochondrial DNA analyses (control region), the microsatellite data exhibited significant differentiation among samples inside the Mar Menor and between lagoonal and marine samples. This pattern was corroborated using Cavalli-Sforza genetic distances. The habitat fragmentation inside the coastal lagoon and among lagoon and marine localities could be acting as a barrier to gene flow and contributing to the observed genetic structure. Our results from generalized additive models point a significant link between extreme lagoonal environmental conditions (mainly maximum salinity) and P. marmoratus genetic composition. Thereby, these environmental features could be also acting on genetic structure of coastal lagoon populations of P. marmoratus favoring their genetic divergence. The mating strategy of P. marmoratus could be also influencing our results obtained from mitochondrial and nuclear DNA. Therefore, a special consideration must be done in the selection of the DNA markers depending on the reproductive strategy of the species

Uncertainty evaluation associated with versatile automated gauging influenced by process variations through design of experiments approach

Recent advances in versatile automated gauging have enabled accurate geometric tolerance assessment on the shop floor. This paper is concerned with the uncertainty evaluation associated with comparative coordinate measurement using the design of experiments (DOE) approach. It employs the Renishaw Equator which is a software-driven comparative gauge based on the traditional comparison of production parts to a reference master part. The fixturing requirement of each production part to the master part is approximately ±1 mm for a comparison process with an uncertainty of ±2 μm. Therefore, a number of experimental designs are applied with the main focus on the influence of part misalignment from rotation between master and measure coordinate frames on the comparator measurement uncertainty. Other factors considered include measurement mode mainly in scanning and touch-trigger probing (TTP) and alignment procedure used to establish the coordinate reference frame (CRF) with respect to the number of contact points used for each geometric feature measured. The measurement uncertainty analysis of the comparator technique used by the Equator gauge commences with a simple measurement task using a gauge block to evaluate the three-dimensional (3D) uncertainty of length comparative coordinate measurement influenced by an offset by tilt in one direction (two-dimensional angular misalignment). Then, a specific manufactured measurement object is employed so that the comparator measurement uncertainty can be assessed for numerous measurement tasks within a satisfactory range of the working volume of the versatile gauge. Furthermore, in the second case study, different types of part misalignment including both 2D and 3D angular misalignments are applied. The time required for managing the re-mastering process is also examined. A task specific uncertainty evaluation is completed using DOE. Also, investigating the effects of process variations that might be experienced by such a device in workshop environments. It is shown that the comparator measurement uncertainties obtained by all the experiments agree with system features under specified conditions. It is also demonstrated that when the specified conditions are exceeded, the comparator measurement uncertainty is associated with the measurement task, the measurement strategy used, the feature size, and the magnitude and direction of offset angles in relation to the reference axes of the machine. In particular, departures from the specified part fixturing requirement of Equator have a more significant effect on the uncertainty of length measurement in comparator mode and a less significant effect on the diameter measurement uncertainty for the specific Equator and test conditions

In vivo testing of novel vaccine prototypes against Actinobacillus pleuropneumoniae

Actinobacillus pleuropneumoniae (A. pleuropneumoniae) is a Gram-negative bacterium that represents the main cause of porcine pleuropneumonia in pigs, causing significant economic losses to the livestock industry worldwide. A. pleuropneumoniae, as the majority of Gram-negative bacteria, excrete vesicles from its outer membrane (OM), accordingly defined as outer membrane vesicles (OMVs). Thanks to their antigenic similarity to the OM, OMVs have emerged as a promising tool in vaccinology. In this study we describe the in vivo testing of several vaccine prototypes for the prevention of infection by all known A. pleuropneumoniae serotypes. Previously identified vaccine candidates, the recombinant proteins ApfA and VacJ, administered individually or in various combinations with the OMVs, were employed as vaccination strategies. Our data show that the addition of the OMVs in the vaccine formulations significantly increased the specific IgG titer against both ApfA and VacJ in the immunized animals, confirming the previously postulated potential of the OMVs as adjuvant. Unfortunately, the antibody response raised did not translate into an effective protection against A. pleuropneumoniae infection, as none of the immunized groups following challenge showed a significantly lower degree of lesions than the controls. Interestingly, quite the opposite was true, as the animals with the highest IgG titers were also the ones bearing the most extensive lesions in their lungs. These results shed new light on A. pleuropneumoniae pathogenicity, suggesting that antibody-mediated cytotoxicity from the host immune response may play a central role in the development of the lesions typically associated with A. pleuropneumoniae infections

HLA-DRB1 association with Henoch-Schonlein purpura

Objective: Henoch-Schönlein purpura (HSP) is the most common vasculitis in children but it is not exceptional in adults. Increased familial occurrence supports a genetic predisposition for HSP. In this context, an association with the human leukocyte antigen-HLA-DRB1*01 phenotype has been suggested in Caucasian individuals with HSP. However, data on the potential association of HSP with HLA-DRB1*01 were based on small case series. To further investigate this issue, we performed HLA-DRB1 genotyping of the largest series of HSP patients ever assessed for genetic studies in Caucasians. Methods: 342 Spanish patients diagnosed with HSP fulfilling the American College of Rheumatology and the Michel et al classification criteria, and 303 sex and ethnically matched controls were assessed. HLA-DRB1 alleles were determined using a PCR-Sequence-Specific-Oligonucleotide Probe (PCR-SSOP) method. Results: A statistically significant increase of HLA-DRB1*01 in HSP patients when compared with controls was found (43% vs 7%, respectively; p<0.001; odds ratio-OR=2.03 [1.43-2.87]). It was due to the increased frequency of HLA-DRB1*0103 phenotype in HSP (14% vs 2%; p<0.001; OR=8.27 [3.46-23.9]). These results remained statistically significant after adjusting for Bonferroni correction. In contrast, a statistically significant decreased frequency of the HLA-DRB1*0301 phenotype was observed in patients compared to controls (5.6% vs 18.1%, respectively; p<0.001, OR=0.26 [0.14-0.47]), even after adjustment for Bonferroni correction. No HLA-DRB1 association with specific features of the disease was found. Conclusion: Our study confirms an association of HSP with HLA-DRB1*01 in Caucasians. Also, a protective effect against the development of HSP appears to exist in Caucasians carrying the HLA-DRB1*03 phenotype

Identifying Experimental Tool Use Through Confocal Microscopy

Characterizing use-wear traces quantitatively is a valid way to improve the capacity of use-wear analysis. This aim has been on specialists’ agenda since the beginning of the discipline. Micropolish quantification is especially important, as this type of trace allows the identification of worked materials. During the last decade, confocal microscopy has been used as a promising approach to address this question. Following previous efforts in plant microwear characterization (Ibáñez et al. Journal of Archaeological Science, 48, 96–103, 2014; Journal of Archaeological Science, 73, 62–81, 2016), here we test the capacity of the method for correctly grouping experimental tools used for working eight types of materials: bone, antler, wood, fresh hide, dry hide, wild cereals, domestic cereals, and reeds. We demonstrate, for the first time, that quantitative texture analysis of use-wear micropolish based on confocal microscopy can consistently identify tools used for working different contact materials. In this way, we are able to move toward using texture analysis as part of the standard functional analysis of prehistoric instruments.This study is part of the projects HAR2016-74999-P, HAR2015-68566-P, and HAR2016-81971-REDT funded by the Spanish Ministerio de Ciencia, Innovación y Universidades.Peer reviewe

Human papillomavirus infections in women seeking cervical Papanicolaou cytology of Durango, Mexico: prevalence and genotypes

BACKGROUND: HPV infection in women from developing countries is an important public health problem. Therefore, we sought to determine the prevalences of HPV infection and HPV genotypes in a female population of Durango City, Mexico. Also to determine whether any socio-demographic characteristic from the women associated with HPV infection exists. METHODS: Four hundred and ninety eight women seeking cervical Papanicolaou examination in three public Health Centers were examined for HPV infection. All women were tested for HPV DNA PCR by using HPV universal primers. In addition, all positive HPV DNA PCR samples were further analyzed for genotyping of HPV genotype 16, 18 and 33. Socio-demographic characteristics from each participant were also obtained. RESULTS: Twenty-four out of four hundred and ninety-eight (4.8%) women were found infected by HPV. HPV genotype 16 was found in 18 out of the 24 (75%) infected women. Two of them were also coinfected by HPV genotype 18 (8.3%). In the rest 6 PCR positive women, genotyping for HPV genotypes 16, 18 and 33 were negative. CONCLUSION: The prevalence of HPV in women of Durango City is low; however, most infected women have high risk HPV genotype. The women who were studied showed low frequency of risk factors for HPV infection and this may explain the low prevalence of HPV infection. The high frequency of high risk HPV genotypes observed might explain the high rate of mortality for cervical cancer in our region

Bead Array Direct rRNA Capture Assay (rCapA) for Amplification Free Speciation of Mycobacterium Cultures

Mycobacterium cultures, from patients suspected of tuberculosis or nontuberculous mycobacteria (NTM) infection, need to be identified. It is most critical to identify cultures belonging to the Mycobacterium tuberculosis complex, but also important to recognize clinically irrelevant or important NTM to allow appropriate patient management. Identification of M. tuberculosis can be achieved by a simple and cheap lateral flow assay, but identification of other Mycobacterium spp. generally requires more complex molecular methods. Here we demonstrate that a paramagnetic liquid bead array method can be used to capture mycobacterial rRNA in crude lysates of positive cultures and use a robust reader to identify the species in a direct and sensitive manner. We developed an array composed of paramagnetic beads coupled to oligonucleotides to capture 16 rRNA from eight specific Mycobacterium species and a single secondary biotinilated reporter probe to allow the captured rRNA to be detected. A ninth less specific bead and its associated reporter probe, designed to capture 23S rRNA from mycobacteria and related genera, is included as an internal control to confirm the presence of bacterial rRNA from a GC rich Gram variable genera. Using this rRNA capture assay (rCapA) with the array developed we were already able to confirm the presence of members of the M. tuberculosis complex and to discriminate a range of NTM species. This approach is not based on DNA amplification and therefore does not require precautions to avoid amplicon contamination. Moreover, the new generation of stable and cost effective liquid bead readers provides the necessary multiplexing potential to develop a robust and highly discriminatory assay

Predictors of patient satisfaction with hospital health care

BACKGROUND: We used a validated inpatient satisfaction questionnaire to evaluate the health care received by patients admitted to several hospitals. This questionnaire was factored into distinct domains, creating a score for each to assist in the analysis. We evaluated possible predictors of patient satisfaction in relation to socio-demographic variables, history of admission, and survey logistics. METHODS: Cross-sectional study of patients discharged from four acute care general hospitals. Random sample of 650 discharged patients from the medical and surgical wards of each hospital during February and March 2002. A total of 1,910 patients responded to the questionnaire (73.5%). Patient satisfaction was measured by a validated questionnaire with six domains: information, human care, comfort, visiting, intimacy, and cleanliness. Each domain was scored from 0 to 100, with higher scores indicating higher levels of patient satisfaction. RESULTS: In the univariate analysis, age was related to all domains except visiting; gender to comfort, visiting, and intimacy; level of education to comfort and cleanliness; marital status to information, human care, intimacy, and cleanliness; length of hospital stay to visiting and cleanliness, and previous admissions to human care, comfort, and cleanliness. The timing of the response to the mailing and who completed the questionnaire were related to all variables except visiting and cleanliness. Multivariate analysis confirmed in most cases the previous findings and added additional correlations for level of education (visiting and intimacy) and marital status (comfort and visiting). CONCLUSION: These results confirm the varying importance of some socio-demographic variables and length of stay, previous admission, the timing of response to the questionnaire, and who completed the questionnaire on some aspects of patient satisfaction after hospitalization. All these variables should be considered when evaluating patient satisfaction