Supporting the Photocatalysts on ZrO2 : An Effective Way to Enhance the Photocatalytic Activity of SrSnO3

This work was supported by Paraíba State Research Foundation /FAPESQ (grant number 0012/2019), PROINFRA/FINEP/MCTIC and in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES) – Finance Code 001. The authors acknowledge Professor Graeme Paton from the School of Biological Sciences – University of Aberdeen, for the use of the spectrofluorimeter and Ana Rita Ferreira Alves Teixeira for kindly giving in the photocatalytic results with P25 for comparison. CRediT authorship contribution statement Luzia Maria Castro Honorio: Conceptualization, Investigation, Writing - original draft. André Luiz Menezes Oliveira: Formal analysis, Writing - original draft. Edson Cavalcanti Silva Filho: . Josy Anteveli Osajima: . Amer Hakki: . Donald E. Macphee: Writing - review & editing. Iêda Maria Garcia Santos: Investigation, Writing - review & editing, Supervision.Peer reviewedPostprin

An EPR investigation on reduced Sn centres in SrSnO3 perovskite

The use of the wide band gap SrSnO3 semiconductor in photocatalysis has grown over the last few years, driven predominantly by sustainability given that its constituents are all Earth abundant elements. Using EPR spectroscopy, we elucidate the paramagnetic species present in the material, either intrinsic or photo-generated. EPR measurements confirmed the presence of paramagnetic oxygen vacancies (g = 2.0058) and a defect sensitive to visible light irradiation despite a wide optical band gap of 4.1 eV. This defect was confirmed to be Sn3+ (g = 2.014 and g = 1.994). Its concentration appears to increase with visible light irradiation, suggesting a photo-induced formation associated with electronic transitions from Sn2+ intra-band gap states to the conduction band

Panorama atual e potencial de aplicação da abordagem dos serviços ecossistêmicos do solo no Brasil

Human pressure on ecosystems has undesirable impacts on human well-being. After the Millennium Project, much interdisciplinary research has been developed worldwide aiming to understand these impacts on ecosystem flows and processes, and to learn about the costs and the benefits of ecosystem services for production. Soil provides many ecosystem services, since its multi-functionality is the basis for food production, water filtration, nutrient cycling, and other goods essential to life. This article presents the main concepts and classifications of soil ecosystem services and of its functions; the indicators and the methods for assessment, modeling, and valuation of ecosystem services; some recent applications to assess and evaluate impacts of agricultural management practices on soil ecosystem services; as well as challenges and opportunities for research and for development of public policies related to agro-environmental sustainability in Brazil. Although the role of soil in supplying ecosystem services is yet undervalued, scientists are gradually recognizing soil processes and functions as fundamental to assess ecosystem services and the effects of land use and management on them. Interdisciplinary approaches to integrate science and public policies are necessary to build governance based on ecosystem services.A pressão humana sobre os serviços ecossistêmicos tem resultado em impactos indesejáveis sobre o bem-estar humano. Com o Projeto Millennium, várias pesquisas interdisciplinares têm sido desenvolvidas em todo o mundo com o objetivo de entender esses impactos sobre os fluxos e os processos dos ecossistemas e internalizar os custos e os benefícios dos serviços ecossistêmicos para a produção. O solo fornece muitos serviços ecossistêmicos, uma vez que sua multifuncionalidade é a base para a produção de alimentos, filtração de água, ciclagem de nutrientes e outros bens essenciais à vida. Este artigo apresenta os principais conceitos e classificações dos serviços ecossistêmicos do solo e de suas funções; os indicadores e os métodos de avaliação, modelagem e valoração dos serviços ecossistêmicos; algumas aplicações recentes para avaliar impactos de práticas de manejo agrícola sobre os serviços ecossistêmicos do solo; bem como os desafios e as oportunidades para a pesquisa e para o desenvolvimento de políticas públicas relacionadas à sustentabilidade agroambiental no Brasil. Apesar de o papel do solo para prestação de serviços ecossistêmicos ainda ser subestimado, os cientistas têm gradualmente reconhecido os processos e as funções do solo como fundamentais para avaliar os serviços ecossistêmicos e os efeitos do uso e manejo da terra sobre eles. Abordagens interdisciplinares que integrem ciência e políticas públicas são necessárias para construir uma governança com base em serviços ecossistêmicos

An estimate of the number of tropical tree species

The high species richness of tropical forests has long been recognized, yet there remains substantial uncertainty regarding the actual number of tropical tree species. Using a pantropical tree inventory database from closed canopy forests, consisting of 657,630 trees belonging to 11,371 species, we use a fitted value of Fisher’s alpha and an approximate pantropical stem total to estimate the minimum number of tropical forest tree species to fall between ∼40,000 and ∼53,000, i.e. at the high end of previous estimates. Contrary to common assumption, the Indo-Pacific region was found to be as species-rich as the Neotropics, with both regions having a minimum of ∼19,000–25,000 tree species. Continental Africa is relatively depauperate with a minimum of ∼4,500–6,000 tree species. Very few species are shared among the African, American, and the Indo-Pacific regions. We provide a methodological framework for estimating species richness in trees that may help refine species richness estimates of tree-dependent taxa

Synthèse et Caractérisation de poudres et couches minces de SrSn Ti O

Le stannate (SrSnO3) et le titanate de strontium (SrTiO3) sont des oxydes de type pérovskite, de structures orthorhombique (Pbnm) et cubique (Pm3m), respectivement. Ces matériaux ont reçu beaucoup d'attention ces dernières années en raison de leurs propriétés physiques et chimiques intéressantes conduisant à différents types d'applications technologiques. Pour ces raisons, ces deux matériaux ont été combinés pour obtenir la solution solide de SrSn1-xTixO3, sous forme de poudres et couches minces. Au niveau des poudres, la solution solide a présenté des transitions de phases successives allant d'une structure orthorhombique à tétragonale puis cubique avec l augmentation de la quantité de Ti4+ dans le système. Ces transitions ont été observées par affinement Rietveld des spectres de diffraction des rayons X et confirmées par spectroscopie Raman. Ces différentes structures cristallines ont conduit à des propriétés différentes de photoluminescence dans le spectre visible, l émission variant d une région de basse énergie vers les régions de plus haute énergie avec l augmentation de Ti4+ dans la structure (structure orthorhombique (SrSnO3), tétragonale (SrSn0,75Ti0,25O3) à cubique (SrSn0,50Ti0,50O3, SrSn0,25Ti0,75O3 et SrTiO3). Ces émissions sont probablement favorisées par différents types de défauts formés dans le gap d énergie de ces matériaux. Par ailleurs, les couches minces ont montré différents types de croissance qui ont été fortement influencés par la nature cristalline du substrat, la composition des films ainsi que par la méthode de dépôt utilisée (dépôt par voie chimique en solution CSD et dépôt par ablation laser pulsé PLD). Les films minces déposés sur silice sont polycristallins (croissance aléatoire des cristallites), les couches sur saphir-R (Al2O3-012) sont également polycristallines mais avec une orientation préférentielle (h00) quand préparées par PLD (croissance texturée), excepté SrTiO3 qui est épitaxié avec une rotation de 45 par rapport au plan du substrat de saphir-R. Tous les films déposés sur LAO (LaAlO3-100) sont épitaxiés (h00) quelque soit la méthode de dépôt. De plus, les caractéristiques morphologiques et les propriétés photocatalytiques des films ont également été fortement influencées par ces mêmes paramètres cités précédemment. Concernant les propriétés photocatalytiques, les films préparés par la méthode CSD ont été plus efficaces que ceux obtenus par PLD et les couches de compositions plus riches en Sn4+ ont été plus actives face à la photodégradation du colorant Remazol jaune or, l efficacité maximale étant observée pour la couche polycristalline de SrSnO3 obtenue par CSD avec un pourcentage de dégradation et de décoloration d environ 55 et 90 %, respectivement. Le type de croissance des films de SrSnO3 préparés par les deux méthodes de dépôt a aussi montré une forte influence sur la photodégradation du colorant, les couches polycristallines d orientation aléatoire obtenues sur silice étant plus efficaces que les texturées, elles-mêmes plus efficaces que les couches épitaxiales.Strontium stannate (SrSnO3) and titanate (SrTiO3) are perovskite type oxides that have orthorhombic (Pbnm) and cubic (Pm3m) structures, respectively. These materials have received much attention due to their interesting physical and chemical characteristics, leading to a variety of technological applications. In this sense, these two materials were combined to each other in order to obtain powders and thin films of a solid solution, SrSn1-xTixO3. In relation to the powders, this solid solution presented successive phase transitions ranging from orthorhombic and tetragonal structures to a cubic one with increasing of Ti4+ amount in the composition. These transitions were observed by XRD Rietveld refinement of the samples and confirmed by Raman spectroscopy. The different crystalline structures of the compositions within the solid solution led to different photoluminescent properties in the visible spectrum varying the range of emission, moving from a lower energy region to a higher one with increasing of Ti4+ in the structure (from orthorhombic (SrSnO3), tetragonal (SrSn0.75Ti0.25O3) to cubic (SrSn0.50Ti0.50O3 ; SrSn0.25Ti0.75O3 and SrTiO3). These emissions were probably favored by specific defects created inside the band gap of these materials. On the other hand, the thin films of this system showed different growth orientations that are associated to the crystalline nature of the substrates, the composition of the thin films and the deposition method (Chemical Solution Deposition - CSD - and Pulsed Laser Deposition - PLD). The films deposited on silica substrate were polycrystalline (random growth of the crystallites), whereas the films deposited on sapphire-R (Al2O3-012) were also polycrystalline, with a preferred orientation (h00) for the films deposited by PLD (textured growth), except SrTiO3 which was rotated 45 epitaxially in the sapphire plane. On the contrary, all of the films deposited on LAO (LaAlO3-100) had an (h00) epitaxial growth. In addition to that, the morphological characteristics and photocatalytic properties were strongly influenced also by the same parameters described above. Regarding the photocatalytic efficiency of the films, those obtained by CSD were more efficient than the ones obtained by PLD. Moreover, the films with Sn4+ richer compositions were the most active in the photodegradation of the azo dye Remazol yellow gold, reaching a maximum efficiency with the polycrystalline SrSnO3 thin film obtained by CSD whose degradation and decolorization percentage were 55 and 90 %, respectively. The type of orientation of the SrSnO3 films showed also a strong influence on the photodegradation of the dye. The polycrystalline films with a random orientation obtained on silica were more efficient than the textured films and these ones were more than the epitaxial films.RENNES1-Bibl. électronique (352382106) / SudocSudocFranceF

The influence of temperature on the color of TiO2:Cr pigments

TiO2:Cr brown pigments were prepared via a polymeric precursor derived from the Pechini method. The pigments were analyzed by infrared spectroscopy, X-ray diffraction, ultraviolet-vis spectroscopy, and colorimetry. The increase of the calcination temperature from 700 to 1000 degrees C led to a decrease in the L* values, corresponding to darkening of the pigments. The pigments obtained in this work are darker than those produced by a solid-state reaction method reported before. The change in the pigment color is due to the anatase-rutile phase transition, which leads to a shift in the charge transfer bond (Ti4+ - O2-) due to a change in the crystal field around the chromophore ions. Moreover, the oxidation state of chromium was observed to change, and this also alters the color of the pigments. (C) 2008 Elsevier Ltd. All rights reserved.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Evolution of the structural and microstructural characteristics of SrSn_{1 - x}Ti_xO₃ thin films under the influence of the composition, the substrate and the deposition method

International audienceSrSn1 - xTixO3 thin films were grown on R-sapphire and (100) LaAlO3 single crystal substrates by two different routes: chem. soln. deposition (CSD) and pulsed laser deposition (PLD). Structural and microstructural characteristics of the films were detd. by X-ray diffraction (θ-2θ, ω- and φ-scans) and field emission SEM. Pure perovskite phase was obtained for all of the compns., whatever the method of deposition and the substrate nature. On R-sapphire, a randomly oriented growth (polycryst.) was obsd. for all of the compns. deposited by CSD while (h00) preferential orientation was attained when deposition was done by PLD, in particular for SrTiO3 compn. The phi-scan performed on this sample revealed that the (100) oriented grains present an in-plane ordering (epitaxial growth) with respect to the substrate with an alignment of the [011] direction of the film along the [121[n.773]] direction of the substrate, explained on the basis of misfit considerations and interface arrangements. All of the films grown on (100) LaAlO3 exhibited an epitaxial growth with an in-plane relationship 〈010〉film // 〈010〉substrate. As for the thin film microstructure, porosity, homogeneity, shape and size of the grains were strongly influenced by Ti content in the SrSn1 - xTixO3 solid soln., and also by the nature of the substrate and by the deposition method. Moreover, the influence of the compn. and thin film growth on the photoluminescence of SST films were also evaluated

Yellow ZnxNi1-xWO4 pigments obtained using a polymeric precursor method

New tungstate-based ceramic pigments, displaying ZnxNi1-xWO4 stoichiometry, were obtained at low temperature using a polymeric precursor method. The powder precursors were milled in an attritor mill in an alcoholic rnedium and heat treated for 12 h. yielding homogeneous and crystalline powder pigments. Characterization (TG/DTA, XRD, IR and colorimetry) showed that mass loss increased with increasing Zn contents. Despite the presence of secondary phases and impurities, the wolframite phase was present in all samples. IR analysis revealed bands related to Me-O and [WO6](6-) group stretching was observed. The intensity of the yellow color of the pigments increased with increasing amount of nickel. (c) 2007 Elsevier Ltd. All fights reserved