276 research outputs found

    Application of cerium chloride to improve the acid resistance of dentine

    Full text link
    OBJECTIVE: To investigate the effect of cerium chloride, cerium chloride/fluoride and fluoride application on calcium release during erosion of treated dentine. METHODS: Forty dentine samples were prepared from human premolars and randomly assigned to four groups (1-4). Samples were treated twice a day for 5 days, 30s each, with the following solutions: group 1 placebo, group 2 fluoride (Elmex fluid), group 3 cerium chloride and group 4 combined fluoride and cerium chloride. For the determination of acid resistance, the samples were consecutively eroded six times for 5 min with lactic acid (pH 3.0) and the calcium release in the acid was determined. Furthermore, six additional samples per group were prepared and used for EDS analysis. SEM pictures of these samples of each group were also captured. RESULTS: Samples of group 1 presented the highest calcium release when compared with the samples of groups 2-4. The highest acid resistance was observed for group 2. Calcium release in group 3 was similar to that of group 4 for the first two erosive attacks, after which calcium release in group 4 was lower than that of group 3. Generally, the SEM pictures showed a surface coating for groups 2-4. No deposits were observed in group 1. CONCLUSION: Although fluoride showed the best protective effect, cerium chloride was also able to reduce the acid susceptibility of dentine significantly, which merits further investigation

    Poly(alkyl methacrylate) tooth coatings for dental care: evaluation of the demineralisation-protection benefit using a time-resolved in vitro method

    Get PDF
    An in vitro method for the time-resolved quantification of acid-mediated tooth demineralisation has been developed and evaluated against putative non-permanent protective formulations based on a series of poly(alkyl methacrylate)s. Using a thermostatted carousel, dentally relevant substrates consisting of hydroxyapatite discs or sections of bovine teeth have been exposed to aqueous citric acid under controlled conditions, before and after being treated with the polymeric coatings. The dissolution of phosphate was monitored by the determination of 31P by Inductively Coupled Plasma—Mass Spectrometry and by the spectrophotometric phosphovanadomolybdate method. Dose-response plots constructed for both groups of treated substrates have revealed that the coatings significantly reduce erosion rates but are less effective at inhibiting tooth demineralisation than the standard fluoride treatment. The approach has enabled an evaluation of the erosion-protection efficiency of each coating

    Size-dependent magnetization switching characteristics and spin wave modes of FePt nanostructures

    Full text link
    We present a comprehensive investigation of the size-dependent switching characteristics and spin wave modes of FePt nanoelements. Curved nanomagnets ("caps") are compared to flat disks of identical diameter and volume over a size range of 100 to 300nm. Quasi-static magnetization reversal analysis using first-order reversal curves (FORC) shows that spherical caps have lower vortex nucleation and annihilation fields than the flat disks. As the element diameter decreases, the reversal mechanism in the caps crosses over sooner to coherent rotation than in the disks. The magnetization dynamics are studied using optically induced small angle precession and reveal a strong size dependence that differs for the two shapes. Flat disks exhibit well-known center and edge modes at all sizes, but as the diameter of the caps increases from 100 to 300 nm, additional oscillation modes appear in agreement with dynamic micromagnetic simulations. In addition, we show that the three-dimensional curvature of the cap causes a much greater sensitivity to the applied field angle which provides an additional way for controlling the ultrafast response of nanomagnetic elements.Comment: 23 pages, 8 figure

    Is diagnosing exposed dentine a suitable tool for grading erosive loss?

    Get PDF
    Quantifying tooth wear in general and erosion in particular mostly is made by distinguishing between lesions restricted to enamel and lesions reaching the underlying dentine. Various scores for grading have been used, but in all systems, higher scores are given in cases of exposed dentine, thus, indicating a more severe stage of the condition. Clinical diagnosis of exposed dentine is made by assessing changes in colour or optical properties of the hard tissues. This paper aims to review the literature and discuss critically problems arising form this approach. It appears that classifying the severity of erosion by the area or depth of exposed dentine is difficult and poorly reproducible, and taking into account the variation of enamel thickness, the amount of tissue lost often is not related simply to the area of exposed dentine. There has still been very little longitudinal investigation of the significance of exposed dentine as a prognostic indicator. Further work and discussion is needed to reevaluate the explanative power of current grading procedures

    How valid are current diagnostic criteria for dental erosion?

    Get PDF
    In principle, there is agreement about the clinical diagnostic criteria for dental erosion, basically defined as cupping and grooving of the occlusal/incisal surfaces, shallow defects on smooth surfaces located coronal from the enamel–cementum junction with an intact cervical enamel rim and restorations rising above the adjacent tooth surface. This lesion characteristic was established from clinical experience and from observations in a small group of subjects with known exposure to acids rather than from systematic research. Their prevalence is higher in risk groups for dental erosion compared to subjects not particularly exposed to acids, but analytical epidemiological studies on random or cluster samples often fail to find a relation between occurrence or severity of lesions and any aetiological factor. Besides other aspects, this finding might be due to lack of validity with respect to diagnostic criteria. In particular, cupping and grooving might be an effect of abrasion as well as of erosion and their value for the specific diagnosis of erosion must be doubted. Knowledge about the validity of current diagnostic criteria of different forms of tooth wear is incomplete, therefore further research is needed

    Metallicity Estimation of Core-Collapse Supernova HII Regions in Galaxies within 30 Mpc

    Get PDF
    This work presents measurements of the local HII environment metallicities of core-collapse supernovae (SNe) within a luminosity distance of 30 Mpc. 76 targets were observed at the Isaac Newton Telescope and environment metallicities could be measured for 65 targets using the N2 and O3N2 strong emission line method. The cumulative distribution functions (CDFs) of the environment metallicities of Type Ib and Ic SNe tend to higher metallicity than Type IIP, however Type Ic are also present at lower metallicities whereas Type Ib are not. The Type Ib frequency distribution is narrower (standard deviation \sim0.06 dex) than the Ic and IIP distributions (\sim0.15 dex) giving some evidence for a significant fraction of single massive progenitor stars; the low metallicity of Type Ic suggests a significant fraction of compact binary progenitors. However, both the Kolmogorov-Smirnov test and the Anderson-Darling test indicate no statistical significance for a difference in the local metallicities of the three SN types. Monte-Carlo simulations reveal a strong sensitivity of these tests to the uncertainties of the derived metallicities. Given the uncertainties of the strong emission methods, the applicability of the tests seems limited. We extended our analysis with the data of the Type Ib/Ic/IIP SN sample from Galbany et al. (2018). The CDFs created with their sample confirm our CDFs very well. The statistical tests, combining our sample and the Galbany et al. (2018) sample, indicate a significant difference between Type Ib and Type IIP with <5% probability that they are drawn from the same parent population

    The skeletal phenotype of chondroadherin deficient mice

    Get PDF
    Chondroadherin, a leucine rich repeat extracellular matrix protein with functions in cell to matrix interactions, binds cells via their a2b1 integrin as well as via cell surface proteoglycans, providing for different sets of signals to the cell. Additionally, the protein acts as an anchor to the matrix by binding tightly to collagens type I and II as well as type VI. We generated mice with inactivated chondroadherin gene to provide integrated studies of the role of the protein. The null mice presented distinct phenotypes with affected cartilage as well as bone. At 3–6 weeks of age the epiphyseal growth plate was widened most pronounced in the proliferative zone. The proteome of the femoral head articular cartilage at 4 months of age showed some distinct differences, with increased deposition of cartilage intermediate layer protein 1 and fibronectin in the chondroadherin deficient mice, more pronounced in the female. Other proteins show decreased levels in the deficient mice, particularly pronounced for matrilin-1, thrombospondin-1 and notably the members of the a1-antitrypsin family of proteinase inhibitors as well as for a member of the bone morphogenetic protein growth factor family. Thus, cartilage homeostasis is distinctly altered. The bone phenotype was expressed in several ways. The number of bone sialoprotein mRNA expressing cells in the proximal tibial metaphysic was decreased and the osteoid surface was increased possibly indicating a change in mineral metabolism. Micro-CT revealed lower cortical thickness and increased structure model index, i.e. the amount of plates and rods composing the bone trabeculas. The structural changes were paralleled by loss of function, where the null mice showed lower femoral neck failure load and tibial strength during mechanical testing at 4 months of age. The skeletal phenotype points at a role for chondroadherin in both bone and cartilage homeostasis, however, without leading to altered longitudinal growth

    Orofacial manifestations in outpatients with anorexia nervosa and bulimia nervosa focusing on the vomiting behavior

    Get PDF
    Objective: This case-control study aims to evaluate the oral health status and orofacial problems in a group of outpatients with eating disorders (ED)—either anorexia nervosa (AN) or bulimia nervosa (BN)—further focusing on the influence of vomit. Materials and methods: Fifty-five women outpatients with AN or BN diagnosis were invited to participate, of which 33 agreed. ED outpatients and matched controls were submitted to a questionnaire and clinical oral examination. Results: Multivariate analysis identified a significantly higher incidence of teeth-related complications (i.e., tooth decay, dental erosion, and self-reported dentin hypersensitivity), periodontal disease, salivary alterations (i.e., hyposalivation and xerostomia), and oral mucosa-related complications in ED outpatients. Dental erosion, self-reported dentin hypersensitivity, hyposalivation, xerostomia, and angular cheilitis were found to be highly correlated with the vomiting behavior. Conclusions: ED outpatients were found to present a higher incidence of oral-related complications and an inferior oral health status, compared to gender- and age-matched controls. Alterations verified within outpatients were acknowledged to be quite similar to those previously reported within inpatients, in both of nature and severity, thus sustaining that the cranio-maxillofacial region is significantly affected by ED, even in the early/milder forms of the condition, as expectedly verified within outpatients.The work was supported by the Faculty of Dental Medicine, U. Porto

    Panorametry: suggestion of a method for mandibular measurements on panoramic radiographs

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Orthopantomography (panoramic radiography) has been used for the study of measurements involving particularly the prediction of the eruption of impacted lower third molars and analyses of measurements of the ramus and head of mandible. The discrepancies involved with the projection of this radiographic image has stimulated the search for further ways to use it, particularly in orthodontic treatments and oral and maxillofacial surgeries. The author proposes a graphimetric method for the mandible, based on panoramic radiography. The results are expressed in linear and angular measurements, aiming at bilateral comparisons as well as the determination of the proportion of skeletal and dental structures, individually and among themselves as a whole. The method has been named Panorametry, and allows measurement of the mandible (Mandibular Panorametry) or the posterior mandibular teeth (Dental Panorametry). When combining mandible and maxilla, it should be referred to as Total Panorametry. It may also be used, in the future, with Cone Beam computed tomography (CT) images, and in this case it may be mentioned as CT Panorametry.</p

    Methodological considerations concerning the development of oral dental erosion indexes: literature survey, validity and reliability

    Get PDF
    Within the context of preventing non-communicable diseases, the World Health Report (2002) and the WHO Global Oral Health Program (2003) put forward a new strategy of disease prevention and health promotion. Greater emphasis is placed on developing global policies in oral health promotion and oral disease prevention. The Decayed, Missing, Filled Teeth (DMFT) index does not meet new challenges in the field of oral health. Dental erosion seems to be a growing problem, and in some countries, an increase in erosion of teeth is associated with an increase in the consumption of beverages containing acids. Therefore, within a revision of the WHO Oral Health Surveys Basic Methods, new oral disease patterns, e.g. dental erosion, have to be taken into account. Within the last 20 years, many studies on dental erosion have been carried out and published. There has been a rapid growth in the number of indexes quantifying dental erosion process in different age groups. However, these indexes are not comparable. This article discusses quality criteria which an index intended for assessing tooth erosion should possess
    corecore