Synthesis, Characterization and Photocatalytic Performance of Calcined ZnCr-Layered Double Hydroxides

The development of new materials for performing photocatalytic processes to remove contaminants is an interesting and important research line due to the ever-increasing number of contaminants on our planet. In this sense, we developed a layered double hydroxide material based on Zn and Cr, which was transformed into the corresponding oxide by heat treatment at 500 & DEG;C. Both materials were widely characterized for their elemental composition, and structural, morphological, optical and textural properties using several experimental techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, UV-vis spectroscopy and physisorption techniques. In addition, the photocatalytic activity of both materials was analysed. The calcined one showed interesting photocatalytic activity in photodegradation tests using crystal violet dye. The operational parameters for the photocatalytic process using the calcined material were optimised, considering the pH, the initial concentration of the dye, the catalyst load, and the regeneration of the catalyst. The catalyst showed good photocatalytic activity, reaching a degradation of 100% in the optimised conditions and showing good performance after five photodegradation cycles.This research was funded by 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia, grant number FEDER-UCA18-107510

Multifunctional microcapsules based on ZnO and n-octadecane: From thermal energy storage to photocatalytic activity

Energy management is one of the most important issues to be addressed in the near future in many fields, one of which is buildings. In this sense, new phase change materials (PCM) are being widely studied for storing energy. Encapsulating PCM is a good way to incorporate these materials into different applications in which energy storage is useful. In this study, microcapsules based on ZnO containing n-octadecane as a phase change material were synthesized and characterized with regard to their structural, morphological and optical properties according to several synthesis parameters, such as the proportion of precursors, stirring rate and ageing time. The microcapsules were characterized using x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–Vis spectroscopy in diffuse reflectance mode. The presence of n-octadecane inside the capsules was confirmed. Their thermal behaviour was analysed by means of differential scanning calorimetry. Heating/cooling cycles were performed, after which the microcapsules presented good stability. Furthermore, the encapsulation efficiency was estimated from melting and crystallization enthalpy values, reaching a value of 23.1%. Moreover, the isobaric specific heat of the microcapsules is higher than that of ZnO, which means that substituting ZnO with microcapsules in buildings leads to an important increase in the amount of sensible heat stored. Finally, the photocatalytic activity of the microcapsules was analysed by studying the photodegradation of Crystal Violet dye. The degradation rate increased when the microcapsules were present, so the photocatalytic activity of the microcapsules was confirmed under UV and visible irradiation, which is of interest because they can be used to remove organic pollutants from buildings.10 página

Emission properties of Pd-doped CsPbBr3 perovskite nanocrystal: Infrared emission due to the Pd-doping

Perovskite-type materials have attracted great attention in recent times due to their interesting characteristics, such as their luminescent properties. The good photoluminescence quantum yields as well as the possibility of tuning the emission wavelength has allowed the study of these materials in several applications, such as sensors or LEDs. As sensors, making nanocrystals of these perovskites emitting in the near infrared (NIR) would open the possibility of using these materials in biomedical applications. In the present work, Pd-doped CsPbBr3 perovskite nanocrystals (NCs) were synthesized and characterized. We show here Pd-doped NCs synthesized emit in NIR, at about 875 nm, using a laser emitting at 785 nm as the excitation source. This result is really new and promising, because it opens the possibility of using these nanocrystals in many applications as sensor in the field of nanobiomedicine in the futur

Stability and Thermal Properties Study of Metal Chalcogenide-Based Nanofluids for Concentrating Solar Power

Nanofluids are colloidal suspensions of nanomaterials in a fluid which exhibit enhanced thermophysical properties compared to conventional fluids. The addition of nanomaterials to a fluid can increase the thermal conductivity, isobaric-specific heat, diffusivity, and the convective heat transfer coefficient of the original fluid. For this reason, nanofluids have been studied over the last decades in many fields such as biomedicine, industrial cooling, nuclear reactors, and also in solar thermal applications. In this paper, we report the preparation and characterization of nanofluids based on one-dimensional MoS2 and WS2 nanosheets to improve the thermal properties of the heat transfer fluid currently used in concentrating solar plants (CSP). A comparative study of both types of nanofluids was performed for explaining the influence of nanostructure morphologies on nanofluid stability and thermal properties. The nanofluids prepared in this work present a high stability over time and thermal conductivity enhancements of up to 46% for MoS2-based nanofluid and up to 35% for WS2-based nanofluid. These results led to an increase in the efficiency of the solar collectors of 21.3% and 16.8% when the nanofluids based on MoS2 nanowires or WS2 nanosheets were used instead of the typical thermal oil

Homeopathic Perovskite Solar Cells: Effect of Humidity during Fabrication on the Performance and Stability of the Device

Rapid degradation in humid environments is a major drawback of methylammonium lead iodide (CH3NH3PbI3), which is the archetypical component of perovskite solar cells. In this work, we have investigated the aging and degradation kinetics of CH3NH3PbI3 films and devices fabricated under controlled conditions as a function of relative humidity (RH) and compared their performance with those that were prepared under dry conditions. The aging and degradation kinetics is monitored by optical absorption and impedance spectroscopy measurements under monochromatic illumination at two different wavelengths. Aged devices show a substantial difference between the recombination rate under red and blue light illumination, which is attributed to the enhancement of local recombination routes upon aging. Interestingly, we observe that this feature is less pronounced in devices prepared under conditions of the highest RH of 50%. In general, we found that these devices keep their original electric properties and withstand a humid environment better. Chemical analysis by X-ray photoelectron spectroscopy reveals the presence of coordinating water in the CH3NH3PbI3 crystalline structure. This indicates that the presence of a small amount of water has a beneficial effect against degradation in a humid environment

Improving the efficiency of the concentrating solar power plants using heat transfer nanofluids with gold nanoplates: An analysis from laboratory to industrial scale

We report about the remarkable changes in the thermophysical properties of the heat transfer fluid used in concentrating solar power plants with parabolic-trough collectors (Dowtherm A, a mixture of diphenyl oxide and biphenyl) by addition of Au nanoplates in mass fractions around 10−2 wt%. The resulting nanofluids are stable for weeks, and their enhanced physical properties make them good candidates for the application. Particularly, with 4.8·10−2 wt% of Au nanoplates, specific heat increases by 12.0 ± 1.2 % at 523 K and thermal conductivity increases by 24.9 ± 6.1 % at 373 K, with no measurable changes in density or dynamic viscosity. This set of physical properties allows to make a realistic estimation of the performance of a prototypical concentrating solar power plant using these nanofluids for solar-to-thermal energy conversion. We determine, using computational cost-free numerical models available in literature, that the performance of a concentrating solar power plant could increase up to 35.1 %, compared to the predicted 24.7 % with the conventional heat transfer fluid, with neither rheological penalties nor economically prohibitive structural changes. The findings here reported may contribute to encourage the application of heat transfer nanofluids in order to improve the efficiency of concentrating solar power plants, and to consolidate a working scheme that positively promotes the transition from laboratory scale to industrial scale. © 2023 The Author

Treatment with tocilizumab or corticosteroids for COVID-19 patients with hyperinflammatory state: a multicentre cohort study (SAM-COVID-19)

Objectives: The objective of this study was to estimate the association between tocilizumab or corticosteroids and the risk of intubation or death in patients with coronavirus disease 19 (COVID-19) with a hyperinflammatory state according to clinical and laboratory parameters. Methods: A cohort study was performed in 60 Spanish hospitals including 778 patients with COVID-19 and clinical and laboratory data indicative of a hyperinflammatory state. Treatment was mainly with tocilizumab, an intermediate-high dose of corticosteroids (IHDC), a pulse dose of corticosteroids (PDC), combination therapy, or no treatment. Primary outcome was intubation or death; follow-up was 21 days. Propensity score-adjusted estimations using Cox regression (logistic regression if needed) were calculated. Propensity scores were used as confounders, matching variables and for the inverse probability of treatment weights (IPTWs). Results: In all, 88, 117, 78 and 151 patients treated with tocilizumab, IHDC, PDC, and combination therapy, respectively, were compared with 344 untreated patients. The primary endpoint occurred in 10 (11.4%), 27 (23.1%), 12 (15.4%), 40 (25.6%) and 69 (21.1%), respectively. The IPTW-based hazard ratios (odds ratio for combination therapy) for the primary endpoint were 0.32 (95%CI 0.22-0.47; p < 0.001) for tocilizumab, 0.82 (0.71-1.30; p 0.82) for IHDC, 0.61 (0.43-0.86; p 0.006) for PDC, and 1.17 (0.86-1.58; p 0.30) for combination therapy. Other applications of the propensity score provided similar results, but were not significant for PDC. Tocilizumab was also associated with lower hazard of death alone in IPTW analysis (0.07; 0.02-0.17; p < 0.001). Conclusions: Tocilizumab might be useful in COVID-19 patients with a hyperinflammatory state and should be prioritized for randomized trials in this situatio

Clonal chromosomal mosaicism and loss of chromosome Y in elderly men increase vulnerability for SARS-CoV-2

The pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2, COVID-19) had an estimated overall case fatality ratio of 1.38% (pre-vaccination), being 53% higher in males and increasing exponentially with age. Among 9578 individuals diagnosed with COVID-19 in the SCOURGE study, we found 133 cases (1.42%) with detectable clonal mosaicism for chromosome alterations (mCA) and 226 males (5.08%) with acquired loss of chromosome Y (LOY). Individuals with clonal mosaic events (mCA and/or LOY) showed a 54% increase in the risk of COVID-19 lethality. LOY is associated with transcriptomic biomarkers of immune dysfunction, pro-coagulation activity and cardiovascular risk. Interferon-induced genes involved in the initial immune response to SARS-CoV-2 are also down-regulated in LOY. Thus, mCA and LOY underlie at least part of the sex-biased severity and mortality of COVID-19 in aging patients. Given its potential therapeutic and prognostic relevance, evaluation of clonal mosaicism should be implemented as biomarker of COVID-19 severity in elderly people. Among 9578 individuals diagnosed with COVID-19 in the SCOURGE study, individuals with clonal mosaic events (clonal mosaicism for chromosome alterations and/or loss of chromosome Y) showed an increased risk of COVID-19 lethality

Homeopathic Perovskite Solar Cells: Effect of Humidity during Fabrication on the Performance and Stability of the Device

Rapid degradation in humid environments is a major drawback of methylammonium lead iodide (CH3NH3PbI3), which is the archetypical component of perovskite solar cells. In this work, we have investigated the aging and degradation kinetics of CH3NH3PbI3 films and devices fabricated under controlled conditions as a function of relative humidity (RH) and compared their performance with those that were prepared under dry conditions. The aging and degradation kinetics is monitored by optical absorption and impedance spectroscopy measurements under monochromatic illumination at two different wavelengths. Aged devices show a substantial difference between the recombination rate under red and blue light illumination, which is attributed to the enhancement of local recombination routes upon aging. Interestingly, we observe that this feature is less pronounced in devices prepared under conditions of the highest RH of 50%. In general, we found that these devices keep their original electric properties and withstand a humid environment better. Chemical analysis by X-ray photoelectron spectroscopy reveals the presence of coordinating water in the CH3NH3PbI3 crystalline structure. This indicates that the presence of a small amount of water has a beneficial effect against degradation in a humid environment

Hybrid Perovskite, CH3NH3PbI3, for Solar Applications: An Experimental and Theoretical Analysis of Substitution in A and B Sites

The effect of the incorporation of into the CH3 sites of the tetragonal perovskite CH3NH3PbI3 is analysed. Also, how it affects the introduction of Cd2+ cations into Pb2+ sites for a perovskite with 25 at.% of is addressed. The incorporation of into perovskite leads to a dramatic loss of crystallinity and to the presence of other phases. Moreover, the NH4PbI3 was not found. The less formation of perovskite when is incorporated is due to geometrical factors and not changes in the chemical state bonding of the ions. Also, the samples where perovskite is formed show similar band gap values. A slight increase is observed for samples with and 0.75. For the sample with , a drastic increase of the band gap is obtained. Periodic-DFT calculations agree with the experimental structural tendency when is incorporated and the density of states analysis confirmed the experimental band gap. The perovskite with 25 at.% of was selected for studying the effect of the concentration of Cd on the structural and electronic properties. The theoretical band gap values decreased with the Cd concentration where the narrowing of Cd s-states in the conduction band plays an important role.Ministerio de Economía y Competitividad (Spain) ENE2014-58085-RUniversidad de Sevilla (España) VPPI-U