401 research outputs found
Spin and lattice excitations of a BiFeO3 thin film and ceramics
We present a comprehensive study of polar and magnetic excitations in BiFeO3
ceramics and a thin film epitaxially grown on an orthorhombic (110) TbScO3
substrate. Infrared reflectivity spectroscopy was performed at temperatures
from 5 to 900 K for the ceramics and below room temperature for the thin film.
All 13 polar phonons allowed by the factor-group analysis were observed in
theceramic samples. The thin-film spectra revealed 12 phonon modes only and an
additional weak excitation, probably of spin origin. On heating towards the
ferroelectric phase transition near 1100 K, some phonons soften, leading to an
increase in the static permittivity. In the ceramics, terahertz transmission
spectra show five low-energy magnetic excitations including two which were not
previously known to be infrared active; at 5 K, their frequencies are 53 and 56
cm-1. Heating induces softening of all magnetic modes. At a temperature of 5 K,
applying an external magnetic field of up to 7 T irreversibly alters the
intensities of some of these modes. The frequencies of the observed spin
excitations provide support for the recently developed complex model of
magnetic interactions in BiFeO3 (R.S. Fishman, Phys. Rev. B 87, 224419 (2013)).
The simultaneous infrared and Raman activity of the spin excitations is
consistent with their assignment to electromagnons
X-ray microscopy of living multicellular organisms with the Prague Asterix Iodine Laser System
Soft X-ray contact microscopy (SXCM) experiments have been performed
using the Prague Asterix Iodine Laser System (PALS). Laser wavelength
and pulse duration were λ = 1.314 μm and τ (FWHM) = 450 ps,
respectively. Pulsed X rays were generated using teflon, gold, and
molybdenum targets with laser intensities I ≥
1014 W/cm2. Experiments have been performed
on the nematodes Caenorhabditis elegans. Images were recorded
on PMMA photo resists and analyzed using an atomic force microscope
operating in contact mode. Our preliminary results indicate the
suitability of the SXCM for multicellular specimens
Risk of venous thromboembolism in people with lung cancer: a cohort study using linked UK healthcare data
Background: Venous thromboembolism is a potentially preventable cause of death in people with lung cancer. Identification of those most at risk and high risk periods may provide the opportunity for better targeted intervention.
Methods: We conducted a cohort study using the Clinical Practice Research Datalink linked to Hospital Episode Statistics and Cancer Registry data. Our cohort comprised 10,598 people with lung cancer diagnosed between 1997 and 2006 with follow-up continuing to the end of 2010. Cox regression analysis was performed to determine which demographic, tumour and treatment-related factors (time-varying effects of chemotherapy and surgery) independently affected VTE risk. We also determined the effect of a VTE diagnosis on the survival of people with lung cancer.
Results: People with lung cancer had an overall VTE incidence of 39.2 per 1000 person years (95% confidence Interval (CI), 35.4-43.5), though rates varied depending on the patient group and treatment course. Independent factors associated with increased VTE risk were: metastatic disease (hazard ratio (HR)=1.9, CI 1.2, 3.0 vs. local disease); adenocarcinoma sub-type (HR =2.0, CI 1.5, 2.7, vs. squamous cell; chemotherapy administration, (HR=2.1, CI 1.4, 3.0 vs. outside chemotherapy courses); and diagnosis via emergency hospital admission (HR=1.7, CI 1.2-2.3 vs. other routes to diagnosis). Patients with VTE had an approximately 50% higher risk of mortality than those without VTE.
Conclusions: People with lung cancer have especially high risk of VTE if they have advanced disease, adenocarcinoma, or are undergoing chemotherapy. Presence of VTE is an independent risk factor for death
Molecular basis of FIR-mediated c-myc transcriptional control
The far upstream element (FUSE) regulatory system promotes a peak in the concentration of c-Myc during cell cycle. First, the FBP transcriptional activator binds to the FUSE DNA element upstream of the c-myc promoter. Then, FBP recruits its specific repressor (FIR), which acts as an on/off transcriptional switch. Here we describe the molecular basis of FIR recruitment, showing that the tandem RNA recognition motifs of FIR provide a platform for independent FUSE DNA and FBP protein binding and explaining the structural basis of the reversibility of the FBP-FIR interaction. We also show that the physical coupling between FBP and FIR is modulated by a flexible linker positioned sequentially to the recruiting element. Our data explain how the FUSE system precisely regulates c-myc transcription and suggest that a small change in FBP-FIR affinity leads to a substantial effect on c-Myc concentration.MRC Grant-in-aid U11757455
Shock pressure induced by 0.44 [mu]m laser radiation on aluminum targets
Shock pressure generated in aluminum targets due to the interaction
of 0.44 μm (3 ω of iodine laser) laser radiation has been
studied. The laser intensity profile was smoothed using phase zone
plates. Aluminum step targets were irradiated at an intensity
I ≈ 1014 W/cm2. Shock velocity in
the aluminum target was estimated by detecting the shock luminosity
from the target rear using a streak camera to infer the shock pressure.
Experimental results show a good agreement with the theoretical model
based on the delocalized laser absorption approximation. In the present
report, we explicitly discuss the importance of target thickness on the
shock pressure scaling
Fluorocarbon evaporative cooling developments for the ATLAS pixel and semiconductor tracking detectors
Heat transfer coefficients 2-5.103 Wm-2K-1 have been measured in a 3.6 mm I.D. heated tube dissipating 100 Watts - close to the full equivalent power (~110 W) of a barrel SCT detector "stave" - over a range of power dissipations and mass flows in the above fluids. Aspects of full-scale evaporative cooling circulator design for the ATLAS experiment are discussed, together with plans for future development
Techno-Ecological Synergy: A Framework for Sustainable Engineering
Even though the importance of ecosystems in sustaining all human activities is well-known, methods for sustainable engineering fail to fully account for this role of nature. Most methods account for the demand for ecosystem services, but almost none account for the supply. Incomplete accounting of the very foundation of human well-being can result in perverse outcomes from decisions meant to enhance sustainability and lost opportunities for benefiting from the ability of nature to satisfy human needs in an economically and environmentally superior manner. This paper develops a framework for understanding and designing synergies between technological and ecological systems to encourage greater harmony between human activities and nature. This framework considers technological systems ranging from individual processes to supply chains and life cycles, along with corresponding ecological systems at multiple spatial scales ranging from local to global. The demand for specific ecosystem services is determined from information about emissions and resource use, while the supply is obtained from information about the capacity of relevant ecosystems. Metrics calculate the sustainability of individual ecosystem services at multiple spatial scales and help define necessary but not sufficient conditions for local and global sustainability. Efforts to reduce ecological overshoot encourage enhancement of life cycle efficiency, development of industrial symbiosis, innovative designs and policies, and ecological restoration, thus combining the best features of many existing methods. Opportunities for theoretical and applied research to make this framework practical are also discussed
Biophysical Characterization and Membrane Interaction of the Two Fusion Loops of Glycoprotein B from Herpes Simplex Type I Virus
The molecular mechanism of entry of herpesviruses requires a multicomponent fusion system. Cell invasion by Herpes simplex virus (HSV) requires four virally encoded glycoproteins: namely gD, gB and gH/gL. The role of gB has remained elusive until recently when the crystal structure of HSV-1 gB became available and the fusion potential of gB was clearly demonstrated. Although much information on gB structure/function relationship has been gathered in recent years, the elucidation of the nature of the fine interactions between gB fusion loops and the membrane bilayer may help to understand the precise molecular mechanism behind herpesvirus-host cell membrane fusion. Here, we report the first biophysical study on the two fusion peptides of gB, with a particular focus on the effects determined by both peptides on lipid bilayers of various compositions. The two fusion loops constitute a structural subdomain wherein key hydrophobic amino acids form a ridge that is supported on both sides by charged residues. When used together the two fusion loops have the ability to significantly destabilize the target membrane bilayer, notwithstanding their low bilayer penetration when used separately. These data support the model of gB fusion loops insertion into cholesterol enriched membranes
Automated Adaptation Strategies for Stream Learning
Automation of machine learning model development is increasingly becoming an established research area. While automated model selection and automated data pre-processing have been studied in depth, there is, however, a gap concerning automated model adaptation strategies when multiple strategies are available. Manually developing an adaptation strategy can be time consuming and costly. In this paper we address this issue by proposing the use of flexible adaptive mechanism deployment for automated development of adaptation strategies. Experimental results after using the proposed strategies with five adaptive algorithms on 36 datasets confirm their viability. These strategies achieve better or comparable performance to the custom adaptation strategies and the repeated deployment of any single adaptive mechanism
- …