622 research outputs found
The effect of dissolved air and natural isotopic distributions on the density of water
The effects of dissolved air and of natural isotopic distributions on the density of water have been determined at 1 atm by using a magnetic float densimeter. Dissolved gases were found to decrease the density by 3.0 ± 0.2 × 10-6 g cm-3 at 4°C. The apparent molal volumes of air were found to be nearly independent of saturation concentration and temperatures between 0° and 30°C...
The equation of state of seawater determined from sound speeds
The PVT properties of seawater were calculated from the sound speed data of Chen and Millero (1977d) over the range of 0 to 40%. salinity, 0 to 40°C, and 0 to 1000 bars…
The effect of pressure on the thermodynamic properties of seawater
For many thermodynamic calculations in oceanography it is necessary to know the effect of pressure (or depth) on various thermodynamic properties. … Recently, a new equation of state for sea-water (Millero et al., 1980; Millero and Poisson, 1981) has been adopted by the UNESCO/ICES/IAPSO joint panel on oceanographic tables and standards. By appropriate differentiation of this equation of state, it is possible to determine the pressure derivatives for the specific volume of seawater solutions. To estimate the effect of pressure on the partial molal thermochemical properties (Millero and Leung, 1976), it is necessary to know the partial molal volumes of sea salt and water as a function of pressure. This can be accomplished by fitting the apparent molal volumes (c{\u3e,,) of seawater solutions to a function of pressure..
History of the Equation of State of Seawater
As one of few who have been involved in the equation of state of seawater over the last 40 years, the author was invited to review some of the history behind its early development and also the more recent thermodynamic equation of state. The article first reviews early (late 1800s) work by Knudsen and others in defining the concept of salinity. This summary leads into the development of the practical salinity scale. Our studies at the University of Miami Rosenstiel School, along with the work of Alain Poisson’s group at Laboratoire de Physique et Chimie, Université Pierre et Marie Curie and that of Alvin Bradshaw and Karl Schleicher at Woods Hole Oceanographic Institution, were instrumental in deriving the 1980 equation of state (EOS-80) that has been used for 30 years. The fundamental work of Ranier Feistel at Leibniz Institute for Baltic Sea Research led to the development of a Gibbs free energy function that is the backbone of the new thermodynamic equation of state (TEOS-10). It can be used to determine all of the thermodynamic properties of seawater. The salinity input to the TEOS-10 Gibbs function requires knowledge of the absolute salinity of seawater (SA), which is based upon the reference salinity of seawater (SR). The reference salinity is our best estimate of the absolute salinity of the seawater that was used to develop the practical salinity scale (SP), the equation of state, and the other thermodynamic properties of seawater. Reference salinity is related to practical salinity by SR = SP (35.16504/35.000) g kg-1 and absolute salinity is related to reference salinity by SA = SR + δSA,where δSA is due to the added solutes in seawater in deep waters resulting from the dissolution of CaCO3(s) and SiO2(s), CO2, and nutrients like NO3 and PO4 from the oxidation of plant material. The δSA values due to the added solutes are estimated from the differences between the measured densities of seawater samples compared with the densities calculated from the TEOS-10 equation of state (Δρ) at the same reference salinity, temperature, and pressure, using δSA = Δρ/0.75179 g kg-1.The values of δSA in the ocean can be estimated for waters at given longitude, latitude, and depth using correlations of δSA and the concentration of Si(OH)4 in the waters. The SA values can then be used to calculate all the thermodynamic properties of seawater in the major oceans using the new TEOS-10. It will be very useful to modelers examining the entropy and enthalpy of seawater
The density of seawater solutions at one atmosphere as a function of temperature and salinity
The relative density (d – d0) of diluted and evaporated standard seawater solutions have been determined at one atmosphere with a magnetic float densimeter and a suspension balance from 0.5 to 40‰ salinity and 0 to 40°C…
The equation of state of seawater
The P-V-T properties of seawater calculated from the sound derived equation of state of Wang and Millero (1973)
Effect of Ocean Acidification on the Speciation of Metals in Seawater
Increasing atmospheric CO2 over the next 200 years will cause the pH of ocean waters to decrease further. Many recent studies have examined the effect of decreasing pH on calcifying organisms in ocean waters and on other biological processes (photosynthesis, nitrogen fixation, elemental ratios, and community structure). In this review, we examine how pH will change the organic and inorganic speciation of metals in surface ocean waters, and the effect that it will have on the interactions of metals with marine organisms. We consider both kinetic and equilibrium processes. The decrease in concentration of OH- and CO32- ions can affect the solubility, adsorption, toxicity, and rates of redox processes of metals in seawater. Future studies are needed to examine how pH affects the interactions of metals complexed to organic ligands and with marine organisms
Pacific anthropogenic carbon between 1991 and 2017
© The Author(s), 2019. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Carter, B. R., Feely, R. A., Wanninkhof, R., Kouketsu, S., Sonnerup, R. E., Pardo, P. C., Sabine, C. L., Johnson, G. C., Sloyan, B. M., Murata, A., Mecking, S., Tilbrook, B., Speer, K., Talley, L. D., Millero, F. J., Wijffels, S. E., Macdonald, A. M., Gruber, N., & Bullister, J. L. Pacific anthropogenic carbon between 1991 and 2017. Global Biogeochemical Cycles, 33(5), (2019):597-617, doi:10.1029/2018GB006154.We estimate anthropogenic carbon (Canth) accumulation rates in the Pacific Ocean between 1991 and 2017 from 14 hydrographic sections that have been occupied two to four times over the past few decades, with most sections having been recently measured as part of the Global Ocean Ship‐based Hydrographic Investigations Program. The rate of change of Canth is estimated using a new method that combines the extended multiple linear regression method with improvements to address the challenges of analyzing multiple occupations of sections spaced irregularly in time. The Canth accumulation rate over the top 1,500 m of the Pacific increased from 8.8 (±1.1, 1σ) Pg of carbon per decade between 1995 and 2005 to 11.7 (±1.1) PgC per decade between 2005 and 2015. For the entire Pacific, about half of this decadal increase in the accumulation rate is attributable to the increase in atmospheric CO2, while in the South Pacific subtropical gyre this fraction is closer to one fifth. This suggests a substantial enhancement of the accumulation of Canth in the South Pacific by circulation variability and implies that a meaningful portion of the reinvigoration of the global CO2 sink that occurred between ~2000 and ~2010 could be driven by enhanced ocean Canth uptake and advection into this gyre. Our assessment suggests that the accuracy of Canth accumulation rate reconstructions along survey lines is limited by the accuracy of the full suite of hydrographic data and that a continuation of repeated surveys is a critical component of future carbon cycle monitoring.The data we use can be accessed at CCHDO website (https://cchdo.ucsd.edu/) and GLODAP website (https://www.glodap.info/). This research would not be possible without the hard work of the scientists and crew aboard the many repeated hydrographic cruises coordinated by GO‐SHIP, which is funded by NSF OCE and NOAA OAR. We thank funding agencies and program managers as follows: U.S., Australian, Japanese national science funding agencies that support data collection, data QA/QC, and data centers. Contributions from B. R. C., R. A. F., and R. W. are supported by the National Oceanic and Atmospheric Administration Global Ocean Monitoring and Observing Program (Data Management and Synthesis Grant: N8R3CEA‐PDM managed by Kathy Tedesco and David Legler). G. C. J. is supported by the Climate Observation Division, Climate Program Office, National Oceanic and Atmospheric Administration (NOAA), U.S. Department of Commerce and NOAA Research (fund reference 100007298), grant (N8R1SE3‐PGC). B. M. S was supported by the Australian Government Department of the Environment and CSIRO through the Australian Climate Change Science Programme and by the National Environmental Science Program. N. G. acknowledges support by ETH Zurich. This is JISAO contribution 2018‐0149 and PMEL contribution 4786. We fondly remember John Bullister as a treasured friend, valued colleague, and dedicated mentor, and we thank him for sharing his days with us. He is and will be dearly missed
A multi-decade record of high quality fCO2 data in version 3 of the Surface Ocean CO2 Atlas (SOCAT)
The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled fCO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.7 million fCO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.6 million fCO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water fCO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water fCO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) “living data” publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014). Individual data set files, included in the synthesis product, can be downloaded here: doi:10.1594/PANGAEA.849770. The gridded products are available here: doi:10.3334/CDIAC/OTG.SOCAT_V3_GRID
- …