850 research outputs found
Pro-oxidant Activity And Genotoxicity Of The Astronium Fraxinifolium Using Wing Smart And Allium Cepa Test
Astronium fraxinifolium is an arboreal species found throughout the Brazilian Cerrado region and used in folk medicine as antimicrobial, anti-hemorrhagic and healing. Pro-oxidant activity of extracts of fraxinifolium rough Relative Electrophoresis Mobility (REM) of Bovine Serum Albumin (BSA) protein in presence of the extract and Cu2+ and also the genotoxic potential through Somatic Mutation and Recombination Test (SMART) and Allium cepa tests has been investigated during this study. In the REM, the extracts acting exclusively on BSA resulted in a band formation with higher molecular weight than BSA, probably due to oxidative action of the extracts. In presence of Cu2+and extracts occurred protein fragmentation due to Cu2+ oxidative action potentiated by the extracts. In SMART test the frequency of mutant spots increases with the increased concentration of extract A. fraxinifolium (50 mg mL-1= 1.40 and 100 mg mL-1 = 2.66). The HB cross shows a decrease in the total of mutant spots frequency for the different treatments (50 mg mL-1 =6.60 and 100 mg mL-1 = 3.25). Evaluation of A cutest demonstrated the following results (concentration extract = chromosomal abnormalities) 1 mg mL-1 = 85,10 mg L-1 = 61 50 mg mL-1 = 53,100 mg mL-1 =33 and MMS 10 mg L-1 = 50. Genotoxic and cytotoxic actions can be explained by the actions of tannins present in its composition. Butthere may be other substances that also act for such results. The genotoxicity in medicinal plants contributes to therapeutic safety warning that although the use of medicinal plants is an inexpensive and non-aggressive method it can cause harmful effects if used incorrectly. © 2016 Rafael Rozolen Teixeria Zafred et al.10427628
Right circumcaval ureter and double right renal vein in the Brazilian shorthair cat (Felis catus): two case reports
Variations of the renal veins are well described in the literature, although variations concerning the ureter are considered a rare finding in cats. The circumcaval ureter is one of the rarest variations of the ureter and is characterised by a loop of the ureter posterior to the caudal vena cava. This variant is also known as preureteral vena cava and retrocaval ureter. It is thought to be caused by a deviation during embryonic development of the aforementioned vein. Due to its rarity, there are scarce reports of the circumcaval ureter in cats, and its association with two renal veins makes it less common as well. These variations should be preoperatively identified in order to avoid complications in kidney transplants, ureteral surgeries and cystoscopies, for instance. The present work aims to report two cases of a circumcaval ureter with two renal veins in two different Brazilian shorthair cats (Felis catus)
Carbon footprint of apple and pear : orchards, storage and distribution
Apple and pear represent 51% of fresh fruit orchards in Portugal. This paper presents a life-cycle (LC) greenhouse gas (GHG) assessment (so-called carbon footprint) of 3 apple and 1 pear Portuguese production systems. An LC model and inventory were implemented, encompassing the farm stage (cultivation of fruit trees in orchards), storage and distribution (transport to retail). The functional unit considered in this study was 1 kg of distributed fruit (at retail). Four different LC inventories for orchards were implemented based on data collected from three farms. Inventory data from two storage companies were also gathered. The main results show that the GHG emissions of apple and pear ranged between 192 and 229 gCO2eq kgfruit-1. The GHG emissions (direct and indirect) from the cultivation phase ranged from 36% to 60% of total emissions. Fruit storage, which lasted for as much as 8-10 months, was also responsible for significant emissions due to high energy requirements
Carbon footprint of apple and pear: orchards, storage and distribution
Apple and pear represent 51% of fresh fruit orchards in Portugal. This paper presents a life-cycle (LC) greenhouse gas (GHG) assessment (so-called carbon footprint) of 3 apple and 1 pear Portuguese production systems. An LC model and inventory were implemented, encompassing the farm stage (cultivation of fruit trees in orchards), storage and distribution (transport to retail). The functional unit considered in this study was 1 kg of distributed fruit (at retail). Four different LC inventories for orchards were implemented based on data collected from three farms. Inventory data from two storage companies were also gathered. The main results show that the GHG emissions of apple and pear ranged between 192 and 229 gCO2eq kgfruit-1. The GHG emissions (direct and indirect) from the cultivation phase ranged from 36% to 60% of total emissions. Fruit storage, which lasted for as much as 8-10 months, was also responsible for significant emissions due to high energy requirements.Project ECODEEP (Eco-efficiency and Eco-management in the Agro Industrial sector, FCOMP–05–0128–FEDER–018643) and the Portuguese Science and Technology Foundation projects: MIT/SET/0014/2009, PTDC/SEN-TRA/117251/201
Education plays a greater role than age in cognitive test performance among participants of the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil)
Background: Brazil has gone through fast demographic, epidemiologic and nutritional transitions and, despite recent improvements in wealth distribution, continues to present a high level of social and economic inequality. The ELSA-Brasil, a cohort study, aimed at investigating cardiovascular diseases and diabetes, offers a great opportunity to assess cognitive decline in this aging population through time-sequential analyses drawn from the same battery of tests over time. The purpose of this study is to analyze the influence of sex, age and education on cognitive tests performance of the participants at baseline. Methods: Analyses pertain to 14,594 participants with aged 35 to 74 years, who were functionally independent and had no history of stroke or use of neuroleptics, anticonvulsants, cholinesterase inhibitors or antiparkinsonian agents. Mean age was 52.0 ± 9.0 years and 54.2 % of participants were women. Cognitive tests included the word memory tests (retention, recall and recognition), verbal fluency tests (VFT, animals and letter F) and Trail Making Test B. Multivariable linear regression analysis was used to determine the influence of sociodemographic characteristics on the distribution of the final score of each test. Results: Women had significant and slightly higher scores than men in all memory tests and VFT, but took more time to perform Trail B. Reduced performance in all tests was seen with an increase age and, more importantly, with decrease level of education. The word list and VFT scores decreased at about one word for every 10 years of age whereas higher-educated participants scored four words more on the word list test, and six or seven more correct words on VFT, when compared to lower-educated participants. Additionally, the oldest and less educated participants showed significant lower response rates in all tests. Conclusions: The higher influence of education than age in this Brazilian population reinforce the need for caution in analyzing and diagnosing cognitive impairments based on traditional cognitive tests and the importance of searching for education-free cognitive tests, especially in low and middle-income countries
Advanced interface models for metal forming simulations
Friction and heat transfer in metal forming simulations are usually restricted by software to be interface constants, a situation not reflected by the mechanics of real manufacturing processes. A better simulation approach is to use a micromechanics based method to estimate friction and heat transfer as evolutionary phenomenon. This paper presents a friction and heat transfer module for hot forging simulations. The friction model is based on a lubricant film thickness calculation using the Reynolds equation, and a calculation of the fractional contact area based on asperity flattening and roughening. Friction is then portioned between asperity and lubricant contacts. Heat transfer coefficients are calculated using a new model for heat conduction through asperity contact patches and lubricant that takes into account the restriction to heat flow at the contacts. The program is implemented as a user routine in a popular commercially available finite element code, DEFORM 2D.Schmid, SR.; Liu, J.; Sellés Cantó, MÁ.; Pasang, T. (2013). Advanced interface models for metal forming simulations. Computational Materials Science. 79:763-771. doi:10.1016/j.commatsci.2013.07.025S7637717
Compilation of parameterized seismogenic sources in Iberia for the SHARE European-scale seismic source model.
Abstract: SHARE (Seismic Hazard Harmonization in Europe) is an EC-funded project (FP7) that aims to evaluate European seismic hazards using an integrated, standardized approach. In the context of SHARE, we are compiling a fully-parameterized active fault database for Iberia and the nearby offshore region. The principal goal of this initiative is for fault sources in the Iberian region to be represented in SHARE and incorporated into the source model that will be used to produce seismic hazard maps at the European scale. The SHARE project relies heavily on input from many regional experts throughout the Euro-Mediterranean region. At the SHARE regional meeting for Iberia, the 2010 Working Group on Iberian Seismogenic Sources (WGISS) was established; these researchers are contributing to this large effort by providing their data to the Iberian regional integrators in a standardized format. The development of the SHARE Iberian active fault database is occurring in parallel with IBERFAULT, another ongoing effort to compile a database of active faults in the Iberian region.
The SHARE Iberian active fault database synthesizes a wide range of geological and geophysical observations on active seismogenic sources, and incorporates existing compilations (e.g., Cabral, 1995; Silva et al., 2008), original data contributed directly from researchers, data compiled from the literature, parameters estimated using empirical and analytical relationships, and, where necessary, parameters derived using expert judgment. The Iberian seismogenic source model derived for SHARE will be the first regional-scale source model for Iberia that includes fault data and follows an internationally standardized approach (Basili et al., 2008; 2009). This model can be used in both seismic hazard and risk analyses and will be appropriate for use in Iberian- and European-scale assessments
Consumer mobility and well-being among changing places and shifting ethnicities
International audience(Market)places are spatial entities which individuals and groups might experience as meaningful. By highlighting the role of place in ethnic consumer research, this article argues that increased mobility and changing places render relatively stable notions of ethnicity outdated. We identify three main trajectories to revitalize future research on ethnicity. First, we demonstrate the need for research on ethnic identity to be underpinned by a better understanding of the role of place in identity processes. Second, we contend that the established migration/acculturation paradigm should be replaced by the mobility/adaptiveness paradigm. Third, we consider the profound effects of interethnic contact among mobile and immobile populations within shared places on individual and societal well-being
Desempenho produtivo e econômico de três grupos genéticos de bovinos recriados a pasto com suplementação e terminados em confinamento
- …