283 research outputs found

    A combined FEG-SEM and TEM study of silicon nanodot assembly

    Get PDF
    Nanodots forming dense assembly on a substrate are difficult to characterize in terms of size, density, morphology and cristallinity. The present study shows how valuable information can be obtained by a combination of electron microscopy techniques. A silicon nanodots deposit has been studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) to estimate essentially the dot size and density, quantities emphasized because of their high interest for application. High resolution SEM indicates a density of 1.6 × 1012 dots/cm2 for a 5 nm to 10 nm dot size. TEM imaging using a phase retrieval treatment of a focus series gives a higher dot density (2 × 1012 dots/cm2) for a 5 nm dot size. High Resolution Transmission Electron Microscopy (HRTEM) indicates that the dots are crystalline which is confirmed by electron diffraction. According to HRTEM and electron diffraction, the dot size is about 3 nm which is significantly smaller than the SEM and TEM results. These differences are not contradictory but attributed to the fact that each technique is probing a different phenomenon. A core-shell structure for the dot is proposed which reconcile all the results. All along the study, Fourier transforms have been widely used under many aspects

    Reaction of terminal phosphinidene complexes with acetylenic alcohols: Intramolecular hydrophosphination of a phosphirene ring

    Get PDF
    The transient phosphinidene complex [PhP-Mo(CO) 5], as generated from the appropriate 7-phosphanorbornadiene complex at 110°C in toluene, selectively reacts with the C=≡C triple bond of 4-phenyl-3-butyn-1-ol to give the corresponding phosphirene complex 4. Upon further heating, this phosphirene evolves via two pathways. The minor pathway involves the formal addition of the OH bond of the alcohol function onto the phosphirene P-C ring bond to give the 3-benzylidene-1,2-oxaphospholane complex 5. The major pathway involves the reaction of a second molecule of [PhP-Mo(CO) 5] with the OH group of 4, giving an intermediate phosphirene with an additional secondary alkoxyphosphine functionality (7). An intramolecular hydrophosphination of one P-C bond of the phosphirene ring then immediately takes place to give the cis-1,2-bis(phosphino)ethene [MoCCO) 4] complex 8 as a mixture of two diastereomers. After methylation of the PH group of 8, decomplexation can be efficiently achieved by reaction with sulfur. Structures have been ascertained by X-ray analysis for 5, 8, and the disulfide 10

    Examples of multi-sensor determination of eruptive source parameters of explosive events at mount etna

    Get PDF
    International audienceMulti-sensor strategies are key to the real-time determination of eruptive source parameters (ESPs) of explosive eruptions necessary to forecast accurately both tephra dispersal and deposition. To explore the capacity of these strategies in various eruptive conditions, we analyze data acquiredby two Doppler radars, ground- and satellite-based infrared sensors, one infrasound array, visible video-monitoring cameras as well as data from tephra-fallout deposits associated with a weak and a strong paroxysmal event at Mount Etna (Italy). We find that the different sensors provide complementary observations that should be critically analyzed and combined to provide comprehensive estimates of ESPs. First, all measurements of plume height agree during the strong paroxysmal activity considered, whereas some discrepancies are found for the weak paroxysm due to rapid plume and cloud dilution. Second, the event duration, key to convert the total erupted mass (TEM) in the mass eruption rate (MER) and vice versa, varies depending on the sensor used, providing information on different phases of the paroxysm (i.e., unsteady lava fountaining, lava fountain-fed tephra plume, waning phase associated with plume and cloud expansion in the atmosphere). As a result, TEM and MER derived from different sensors also correspond to the different phases of the paroxysms. Finally, satellite retrievals for grain-size can be combined with radar data to provide a first approximation of total grain-size distribution (TGSD) in near real-time. Such a TGSD shows a promising agreement with the TGSD derived from the combination of satellite data and whole deposit grain-size distribution (WDGSD)

    Improvement of ash plume monitoring, modeling and hazard assessment in the MED-SUV project

    Get PDF
    Volcanic ash clouds produced by explosive eruptions represent a strong problem for civil aviation, road transportation and other human activities. Since Etna volcano produced in the last 35 years more the 200 explosive eruptions of small and medium size. The INGV, liable for its volcano monitoring, developed since 2006 a specific system for forecasting and monitoring Etna’s volcanic ash plumes in collaboration with several national and international institutions. Between 12 January 2011 and 31 December 2013 Etna produced forty-six basaltic lava fountains. Every paroxysm produced an eruption column ranging from a few up to eleven kilometers of height above sea level. The ash cloud contaminated the controlled airspace (CTR) of Catania and Reggio Calabria airports and caused tephra fallout on eastern Sicily sometime disrupting the operations of these airports. In order to give prompt and detailed warnings to the Aviation and Civil Protection authorities, ash plumes monitoring at Osservatorio Etneo, the INGV department in Catania, is carried out using multispectral (from visible to infrared) satellite and ground-based video-surveillance images; seismic and infrasound signals processed in real-time, a Doppler RADAR (Voldorad IIB) able to detect the eruption column in all weather conditions and a LIDAR (AMPLE) for retrieving backscattering and depolarization values of the ash clouds. Forecasting is performed running tephra dispersal models using weather forecast data, and then plotting results on maps published on a dedicated website. 24/7 Control Room operators were able to timely nform Aviation and Civil Protection operators for an effective aviation safety management. A variety of multidisciplinary activities are planned in the MED-SUV project with reference to volcanic ash observations and studies. These include: 1) physical and analogue laboratory experiments on ash dispersal and aggregation; 2) integration of satellite data (e.g. METEOSAT, MODIS) and ground- based measurements (e.g., RADAR, LIDAR) of Etna’s volcanic plumes to quantify mass eruption rate, grain-size distribution at source, and ash cloud concentration; 3) improvement of tools and automatic procedures for the short-term forecasting of volcanic ash dispersal by adopting a multi-model and multi-scenario approach; 4) development of short-term forecasting tools able to use direct measurements of the plume and ash cloud in almost real time (now-casting); 5) development of long-term probabilistic ash fallout maps at the supersite volcanoes.PublishedVienna, Austria4V. Vulcani e ambienteope

    Cenozoic evolution of the steppe-desert biome in Central Asia

    Get PDF
    The origins and development of the arid and highly seasonal steppe-desert biome in Central Asia, the largest of its kind in the world, remain largely unconstrained by existing records. It is unclear how Cenozoic climatic, geological, and biological forces, acting at diverse spatial and temporal scales, shaped Central Asian ecosystems through time. Our synthesis shows that the Central Asian steppe-desert has existed since at least Eocene times but experienced no less than two regime shifts, one at the Eocene–Oligocene Transition and one in the mid-Miocene. These shifts separated three successive “stable states,” each characterized by unique floral and faunal structures. Past responses to disturbance in the Asian steppe-desert imply that modern ecosystems are unlikely to recover their present structures and diversity if forced into a new regime. This is of concern for Asian steppes today, which are being modified for human use and lost to desertification at unprecedented rates

    Rapport de sondages et d'analyses, Le Kilian et les carrières anciennes de trachyte dans la Chaîne des Puys (Puy-de-Dôme)

    Get PDF
    En 2008, l'existence de carrières souterraines médiévales avait été mise en évidence dans la pente ouest du Bois de Manson qui domine la dépression du Cratère Kilian, au pied sud du puy de Dôme. En 2009-2010, des sondages et prospections ont été étendus à tout l'ensemble du Kilian de façon à préciser l'étendue et, si possible, la chronologie de son exploitation dans le passé. Ces travaux ont permis d'observer, dans le fond du cratère et sur son flanc interne ouest, des amoncellements de déblais d'un volume considérable, témoignant d'une extraction de roche à grande échelle durant le haut Moyen Âge et très probablement aussi à l'époque gallo-romaine. Une nouvelle carrière souterraine a été découverte dans la pente interne ouest du cratère. La base du remplissage de cette carrière a livré des charbons datés entre la fin du IV e siècle et le début du VI e siècle par le radiocarbone, tandis que le sommet du remplissage contenait des tessons de céramique datables, par leur typologie, de la fin du V e siècle au début du VIII e siècle. L'état actuel des investigations conduit à faire l'hypothèse que les gallo-romains ont exploité, au fond du cratère, un trachyte compact dont on ne trouve aujourd'hui que les déchets de taille, et dont les affleurements sont masqués par les déblais, tandis que les artisans du Moyen Âge ont recherché un trachyte plus tendre dans les pentes hautes du cratère. Le Kilian doit donc s'ajouter aux trois sources actuellement connues de trachyte d'oeuvre dans le passé, à savoir les volcans Sarcoui, Aumône (ou petit Suchet) et Cliersou. Dès cette découverte, en 2008, s'est posée la question de savoir quelle part éventuelle le trachyte du Kilian avait pu prendre dans la construction du temple de Mercure au sommet du puy de Dôme et dans l'agglomération gallo-romaine située au col de Ceyssat. Pour y répondre, une campagne d'analyses géochimiques et pétrographiques été engagée pour caractériser, aux fins de comparaison, non seulement les trachytes du Kilian et ceux des ruines gallo-romaines, mais, de plus, les trachytes du Cliersou, de l'Aumône et du Sarcoui. Ces analyses ont finalement montré qu'il est possible de faire une discrimination statistiquement significative entre les différents trachytes étudiés, à l'exception de ceux du couple Cliersou-Aumône dont les laves sont très peu différentes les unes des autres. Le résultat le plus remarquable est que tous les trachytes gallo-romains échantillonnés (dont 10 échantillons distincts au temple de Mercure et 10 au col de Ceyssat) se rattachent sans ambiguïté au Kilian. En toute rigueur, ces nouvelles données ne permettent pas d'exclure sans appel la possibilité d'utilisation à l'époque gallo-romaine, au temple de Mercure et au col de Ceyssat, de trachytes provenant d'autres sources que le Kilian (cas des chaperons de mur du col de Ceyssat, provenant du puy de Dôme). Cependant, il faut ajouter qu'un examen visuel des trachytes d'oeuvre dans ces deux sites, portant sur un nombre de moellons et d'éléments architecturaux bien supérieur au nombre de ceux qui ont été analysés, conduit à conclure que leur source est probablement commune. Cette conclusion est basée sur un faciès minéralogique particulier, observable à l'oeil nu ou à la loupe

    Barcoding T Cell Calcium Response Diversity with Methods for Automated and Accurate Analysis of Cell Signals (MAAACS)

    Get PDF
    International audienceWe introduce a series of experimental procedures enabling sensitive calcium monitoring in T cell populations by confocal video-microscopy. Tracking and post-acquisition analysis was performed using Methods for Automated and Accurate Analysis of Cell Signals (MAAACS), a fully customized program that associates a high throughput tracking algorithm, an intuitive reconnection routine and a statistical platform to provide, at a glance, the calcium barcode of a population of individual T-cells. Combined with a sensitive calcium probe, this method allowed us to unravel the heterogeneity in shape and intensity of the calcium response in T cell populations and especially in naive T cells, which display intracellular calcium oscillations upon stimulation by antigen presenting cells
    corecore