915 research outputs found
The role of spatial frequency information for ERP components sensitive to faces and emotional facial expression
To investigate the impact of spatial frequency on emotional facial expression analysis, ERPs were recorded in response to low spatial frequency (LSF), high spatial frequency (HSF), and unfiltered broad spatial frequency (BSF) faces with fearful or neutral expressions, houses, and chairs. In line with previous findings, BSF fearful facial expressions elicited a greater frontal positivity than BSF neutral facial expressions, starting at about 150 ms after stimulus onset. In contrast, this emotional expression effect was absent for HSF and LSF faces. Given that some brain regions involved in emotion processing, such as amygdala and connected structures, are selectively tuned to LSF visual inputs, these data suggest that ERP effects of emotional facial expression do not directly reflect activity in these regions. It is argued that higher order neocortical brain systems are involved in the generation of emotion-specific waveform modulations. The face-sensitive N170 component was neither affected by emotional facial expression nor by spatial frequency information
The N2cc component as an electrophysiological marker of space-based and feature-based attentional target selection processes in touch
An electrophysiological correlate of attentional target selection processes in touch (N2cc component) has recently been discovered in lateralized tactile working memory experiments. This tactile N2cc emerges at the same time as the visual N2pc component, but has a different modality-specific topography over central somatosensory areas. Here, we investigated links between N2cc components and the space-based versus feature-based attentional selection of task-relevant tactile stimuli. On each trial, a pair of tactile items was presented simultaneously to one finger on the left and right hand. Target stimuli were defined by their location (e.g., left index finger; Spatial Attention Task), by a non-spatial feature (continuous versus pulsed; Feature-based Attention Task), or by a combination of spatial and non-spatial features (Conjunction Task). Reliable N2cc components were observed in all three tasks. They emerged considerably earlier in the Spatial Attention Task than in the Feature-based Attention Task, suggesting that space-based selection mechanisms in touch operate faster than feature-guided mechanisms. The temporal pattern of N2cc components observed in the Conjunction Task revealed that space-based and feature-based attention both contributed to target selection, which was initially driven primarily by spatial location. Overall, these findings establish the N2cc component as a new electrophysiological marker of the selective attentional processing of task-relevant stimuli in touch
Phenomenology and epidemiology of impulsive-compulsive behaviours in Parkinson's disease, atypical Parkinsonian disorders and non-Parkinsonian populations
Impulsive-compulsive behaviours are common, quality of life affecting consequences of dopamine replacement therapy which are well recognized in patients with idiopathic Parkinson's disease. Details of the occurrence and nature of these disorders in the atypical parkinsonian neurodegenerative disorders, and in non-Parkinson's patients prescribed dopaminergic stimulation for other disease processes, are slowly emerging. Here we review what is known about the phenomenology, epidemiology and risk factors for impulsive-compulsive behaviours in Parkinson's disease and in other, less well studied, patient groups. By analyzing the available published data, this review identifies potential clues as to the underlying neurobiological mechanism of these disorders, and further identifies critical gaps yet to be addressed
Attentional Repulsion Effects produced by Feature-Guided Shifts of Attention
Attention shifts to particular objects in the visual field can distort perceptual location judgments. Visual stimuli are perceived to be shifted away from the current focus of attention (the Attentional Repulsion Effect, ARE). While links between repulsion effects and stimulus-driven exogenous attentional capture have been demonstrated conclusively, it remains disputed whether AREs can also be elicited as a result of feature-guided attention shifts that are controlled by endogenous task sets. Here, we demonstrate that this is indeed the case. Color singleton cues that appeared together with equiluminant gray items triggered repulsion effects only if they matched a current task-relevant color but not when their color was irrelevant. When target-color and nontarget-color singleton cues appeared in the same display, AREs emerged relative to the position of the target-color cue. By obtaining independent behavioral measures of perceptual repulsion and electrophysiological measures of attentional capture by target-color cues, we also showed that these two phenomena are correlated. Individuals who were more susceptible to attentional capture also produced larger AREs. These results confirm the existence of links between task-set contingent attentional capture and Attentional Repulsion Effects. They also provide the first direct demonstration of the attentional nature of these effects with on-line brain activity measures: Perceptual repulsion arises as the result of prior feature-guided attention shifts to specific locations in the visual field
Stability and activity of Zn/MCM-41 materials in toluene alkylation: Microwave irradiation vs continuous flow
Zn/MCM-41 mesoporous materials have been prepared via classic wet impregnation, employing zinc nitrate as precursor and tested for activity and stability in the Friedel-Crafts alkylation of toluene with benzyl chloride under microwave irradiation and continuous flow. The modified materials were characterized by means of a number of analytical techniques, and surface and textural properties were thoroughly checked. Materials containing the highest Zn loading (15 wt %) provided full conversion after 5 minutes reaction under microwave irradiation (300 W, 120 °C). Materials were proved to be stable and reusable for several cycles with an optimum performance under continuous flow conditions.Fil: Carraro, Paola María. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro de Investigación y Tecnología Química. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química; ArgentinaFil: Goldani, Bruna S.. Universidade Federal de Pelotas; BrasilFil: Alves, Diego. Universidade Federal de Pelotas; BrasilFil: Sathicq, Angel Gabriel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Eimer, Griselda Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro de Investigación y Tecnología Química. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química; ArgentinaFil: Romanelli, Gustavo Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Luque, Rafael. Universidad de Córdoba; España. Rudn University; Rusi
Influence of hand position on the near-effect in 3D attention
Voluntary reorienting of attention in real depth situations is characterized by an attentional bias to locations near the viewer once attention is deployed to a spatially cued object in depth. Previously this effect (initially referred to as the ‘near-effect’) was attributed to access of a 3D viewer-centred spatial representation for guiding attention in 3D space. The aim of this study was to investigate whether the near-bias could have been associated with the position of the response-hand, always near the viewer in previous studies investigating endogenous attentional shifts in real depth. In Experiment 1, the response-hand was placed at either the near or far target depth in a depth cueing task. Placing the response-hand at the far target depth abolished the near-effect, but failed to bias spatial attention to the far location. Experiment 2 showed that the response-hand effect was not modulated by the presence of an additional passive hand, whereas Experiment 3 confirmed that attentional prioritization of the passive hand was not masked by the influence of the responding hand on spatial attention in Experiment 2. The pattern of results is most consistent with the idea that response preparation can modulate spatial attention within a 3D viewer-centred spatial representation
Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling
The aluminium alloy wire 2319 is commonly used for Wire + Arc Additive Manufacturing (WAAM). It is oversaturated with copper, like other alloys of the precipitation hardening 2### series, which are used for structural applications in aviation. Residual stress and distortion are one of the biggest challanges in metal additive manufacturing, however this topic is not widely investigated for aluminium alloys. Neutron diffraction measurements showed that the as-built component can contain constant tensile residual stresses along the height of the wall, which can reach the materials' yield strength. These stresses cause bending distortion after unclamping the part from the build platform. Two different rolling techniques were used to control residual stress and distortion. Vertical rolling was applied inter-pass on top of the wall to deform each layer after its deposition. This technique virtually elimiated the distortion, but produced a characteristic residual stress profile. Side rolling instead was applied on the side surface of the wall, after it has been completed. This technique was even more effective and even inverted the distortion. An interesting observation from the neutron diffraction measurements of the stress-free reference was the significantly larger FCC aluminium unit cell dimension in the inter-pass rolled walls as compared to the as-build condition. This is a result of less copper in solid solution with aluminium, indicating greater precipitation and thus, potentially contibuting to improve the strenght of the material
Event-related potentials reveal the development of stable face representations from natural variability
Hands behind your back: effects of arm posture on tactile attention in the space behind the body
Previous research has shown that tactile-spatial information originating from the front of the body is remapped from an anatomical to an external-spatial coordinate system, guided by the availability of visual information early in development. Comparably little is known about regions of space for which visual information is not typically available, such as the space behind the body. This study tests for the first time the electrophysiological correlates of the effects of proprioceptive information on tactile-attentional mechanisms in the space behind the back. Observers were blindfolded and tactually cued to detect infrequent tactile targets on either their left or right hand and to respond to them either vocally or with index finger movements. We measured event-related potentials (ERPs) to tactile probes on the hands in order to explore tactile-spatial attention when the hands were either held close together or far apart behind the observer's back. Results show systematic effects of arm posture on tactile-spatial attention different from those previously found for front space. While attentional selection is typically more effective for hands placed far apart than close together in front space, we found that selection occurred more rapidly for close than far hands behind the back, during both covert attention and movement preparation tasks. This suggests that proprioceptive space may ‘wrap’ around the body, following the hands as they extend horizontally from the front body midline to the centre of the back
- …