Rip/singularity free cosmology models with bulk viscosity

In this paper we present two concrete models of non-perfect fluid with bulk viscosity to interpret the observed cosmic accelerating expansion phenomena, avoiding the introduction of exotic dark energy. The first model we inspect has a viscosity of the form ${\zeta} = {\zeta}_0 + ({\zeta}_1-{\zeta}_2q)H$ by taking into account of the decelerating parameter q, and the other model is of the form ${\zeta} = {\zeta}_0 + {\zeta}_1H + {\zeta}_2H^2$. We give out the exact solutions of such models and further constrain them with the latest Union2 data as well as the currently observed Hubble-parameter dataset (OHD), then we discuss the fate of universe evolution in these models, which confronts neither future singularity nor little/pseudo rip. From the resulting curves by best fittings we find a much more flexible evolution processing due to the presence of viscosity while being consistent with the observational data in the region of data fitting. With the bulk viscosity considered, a more realistic universe scenario is characterized comparable with the {\Lambda}CDM model but without introducing the mysterious dark energy.Comment: 9 pages, 6 figures, submitted to EPJ-

Review of best management practices for aquatic vegetation control in stormwater ponds, wetlands, and lakes

Auckland Council (AC) is responsible for the development and operation of a stormwater network across the region to avert risks to citizens and the environment. Within this stormwater network, aquatic vegetation (including plants, unicellular and filamentous algae) can have both a positive and negative role in stormwater management and water quality treatment. The situations where management is needed to control aquatic vegetation are not always clear, and an inability to identify effective, feasible and economical control options may constrain management initiatives. AC (Infrastructure and Technical Services, Stormwater) commissioned this technical report to provide information for decision- making on aquatic vegetation management with in stormwater systems that are likely to experience vegetation-related issues. Information was collated from a comprehensive literature review, augmented by knowledge held by the authors. This review identified a wide range of management practices that could be potentially employed. It also demonstrated complexities and uncertainties relating to these options that makes the identification of a best management practice difficult. Hence, the focus of this report was to enable users to screen for potential options, and use reference material provided on each option to confirm the best practice to employ for each situation. The report identifies factors to define whether there is an aquatic vegetation problem (Section 3.0), and emphasises the need for agreed management goals for control (e.g. reduction, mitigation, containment, eradication). Resources to screen which management option(s) to employ are provided (Section 4.0), relating to the target aquatic vegetation, likely applicability of options to the system being managed, indicative cost, and ease of implementation. Initial screening allows users to shortlist potential control options for further reference (Section 5.0). Thirty-five control options are described (Section 5.0) in sufficient detail to consider applicability to individual sites and species. These options are grouped under categories of biological, chemical or physical control. Biological control options involve the use of organisms to predate, infect or control vegetation growth (e.g. classical biological control) or manipulate conditions to control algal growth (e.g. pest fish removal, microbial products). Chemical control options involve the use of pesticides and chemicals (e.g. glyphosate, diquat), or the use of flocculants and nutrient inactivation products that are used to reduce nutrient loading, thereby decreasing algal growth. Physical control options involve removing vegetation or algal biomass (e.g. mechanical or manual harvesting), or setting up barriers to their growth (e.g. shading, bottom lining, sediment capping). Preventative management options are usually the most cost effective, and these are also briefly described (Section 6.0). For example, the use of hygiene or quarantine protocols can reduce weed introductions or spread. Catchment- based practices to reduce sediment and nutrient sources to stormwater are likely to assist in the avoidance of algal and possibly aquatic plant problems. Nutrient removal may be a co-benefit where harvesting of submerged weed biomass is undertaken in stormwater systems. It should also be considered that removal of substantial amounts of submerged vegetation may result in a sudden and difficult-to-reverse s witch to a turbid, phytoplankton dominated state. Another possible solution is the conversion of systems that experience aquatic vegetation issues, to systems that are less likely to experience issues. The focus of this report is on systems that receive significant stormwater inputs, i.e. constructed bodies, including ponds, amenity lakes, wetlands, and highly-modified receiving bodies. However, some information will have application to other natural water bodies

Ferromagnetism in defect-ridden oxides and related materials

The existence of high-temperature ferromagnetism in thin films and nanoparticles of oxides containing small quantities of magnetic dopants remains controversial. Some regard these materials as dilute magnetic semiconductors, while others think they are ferromagnetic only because the magnetic dopants form secondary ferromagnetic impurity phases such as cobalt metal or magnetite. There are also reports in d0 systems and other defective oxides that contain no magnetic ions. Here, we investigate TiO2 (rutile) containing 1 - 5% of iron cations and find that the room-temperature ferromagnetism of films prepared by pulsed-laser deposition is not due to magnetic ordering of the iron. The films are neither dilute magnetic semiconductors nor hosts to an iron-based ferromagnetic impurity phase. A new model is developed for defect-related ferromagnetism which involves a spin-split defect band populated by charge transfer from a proximate charge reservoir in the present case a mixture Fe2+ and Fe3+ ions in the oxide lattice. The phase diagram for the model shows how inhomogeneous Stoner ferromagnetism depends on the total number of electrons Ntot, the Stoner exchange integral I and the defect bandwidth W; the band occupancy is governed by the d-d Coulomb interaction U. There are regions of ferromagnetic metal, half-metal and insulator as well as nonmagnetic metal and insulator. A characteristic feature of the high-temperature Stoner magnetism is an an anhysteretic magnetization curve which is practically temperature independent below room temperature. This is related to a wandering ferromagnetic axis which is determined by local dipole fields. The magnetization is limited by the defect concentration, not by the 3d doping. Only 1-2 % of the volume of the films is magnetically ordered.Comment: 22 pages, 6 figure

Screening of Hydrodynamic Interactions in Semidilute Polymer Solutions: A Computer Simulation Study

We study single-chain motion in semidilute solutions of polymers of length N = 1000 with excluded-volume and hydrodynamic interactions by a novel algorithm. The crossover length of the transition from Zimm (short lengths and times) to Rouse dynamics (larger scales) is proportional to the static screening length. The crossover time is the corresponding Zimm time. Our data indicate Zimm behavior at large lengths but short times. There is no hydrodynamic screening until the chains feel constraints, after which they resist the flow: "Incomplete screening" occurs in the time domain.Comment: 3 figure

Genomics reveals historic and contemporary transmission dynamics of a bacterial disease among wildlife and livestock

Whole-genome sequencing has provided fundamental insights into infectious disease epidemiology, but has rarely been used for examining transmission dynamics of a bacterial pathogen in wildlife. In the Greater Yellowstone Ecosystem (GYE), outbreaks of brucellosis have increased in cattle along with rising seroprevalence in elk. Here we use a genomic approach to examine Brucella abortus evolution, cross-species transmission and spatial spread in the GYE. We find that brucellosis was introduced into wildlife in this region at least five times. The diffusion rate varies among Brucella lineages (∼3 to 8 km per year) and over time. We also estimate 12 host transitions from bison to elk, and 5 from elk to bison. Our results support the notion that free-ranging elk are currently a self-sustaining brucellosis reservoir and the source of livestock infections, and that control measures in bison are unlikely to affect the dynamics of unrelated strains circulating in nearby elk populations

Determining the electronic performance limitations in top-down fabricated Si nanowires with mean widths down to 4 nm

Silicon nanowires have been patterned with mean widths down to 4 nm using top-down lithography and dry etching. Performance-limiting scattering processes have been measured directly which provide new insight into the electronic conduction mechanisms within the nanowires. Results demonstrate a transition from 3-dimensional (3D) to 2D and then 1D as the nanowire mean widths are reduced from 12 to 4 nm. The importance of high quality surface passivation is demonstrated by a lack of significant donor deactivation, resulting in neutral impurity scattering ultimately limiting the electronic performance. The results indicate the important parameters requiring optimization when fabricating nanowires with atomic dimensions

Convective Fingering of an Autocatalytic Reaction Front

We report experimental observations of the convection-driven fingering instability of an iodate-arsenous acid chemical reaction front. The front propagated upward in a vertical slab; the thickness of the slab was varied to control the degree of instability. We observed the onset and subsequent nonlinear evolution of the fingers, which were made visible by a {\it p}H indicator. We measured the spacing of the fingers during their initial stages and compared this to the wavelength of the fastest growing linear mode predicted by the stability analysis of Huang {\it et. al.} [{\it Phys. Rev. E}, {\bf 48}, 4378 (1993), and unpublished]. We find agreement with the thickness dependence predicted by the theory.Comment: 11 pages, RevTex with 3 eps figures. To be published in Phys Rev E, [email protected], [email protected], [email protected]

Precursors of Cytochrome Oxidase in Cytochrome-Oxidase-Deficient Cells of Neurospora crassa

Three different cell types of Neurospora crassa deficient in cytochrome oxidase were studied: the nuclear mutant cni-1, the cytoplasmic mutant mi-1 and copper-depleted wild-type cells. * 1. The enzyme-deficient cells have retained a functioning mitochondrial protein synthesis. It accounted for 12–16% of the total protein synthesis of the cell. However, the analysis of mitochondrial translation products by gel electrophoresis revealed that different amounts of individual membrane proteins were synthesized. Especially mutant cni-1 produced large amounts of a small molecular weight translation product, which is barely detectable in wild-type. * 2. Mitochondrial preparations of cytochrome-oxidase-deficient cells were examined for precursors of cytochrome oxidase. The presence of polypeptide components of cytochrome oxidase in the mitochondria was established with specific antibodies. On the other hand, no significant amounts of heme a could be extracted. * 3. Radioactively labelled components of cytochrome oxidase were isolated by immunoprecipitation and analysed by gel electrophoresis. All three cell types contained the enzyme components 4–7, which are translated on cytoplasmic ribosomes. The mitochondrially synthesized components 1–3 were present in mi-1 mutant and in copper-depleted wild-type cells. In contrast, components 2 and 3 were not detectable in the nuclear mutant cni-1. Both relative and absolute amounts of these polypeptides in the enzyme-deficient cells were quite different from those in wild-type cells. * 4. The components of cytochrome oxidase found in the enzyme-deficient cells were tightly associated with the mitochondrial membranes. * 5. Processes, which affect and may control the production of enzyme precursors or their assembly to a functional cytochrome oxidase are discussed

Chemical informatics uncovers a new role for moexipril as a novel inhibitor of cAMP phosphodiesterase-4 (PDE4)

PDE4 is one of eleven known cyclic nucleotide phosphodiesterase families and plays a pivotal role in mediating hydrolytic degradation of the important cyclic nucleotide second messenger, cyclic 3′5′ adenosine monophosphate (cAMP). PDE4 inhibitors are known to have anti-inflammatory properties, but their use in the clinic has been hampered by mechanism-associated side effects that limit maximally tolerated doses. In an attempt to initiate the development of better-tolerated PDE4 inhibitors we have surveyed existing approved drugs for PDE4-inhibitory activity. With this objective, we utilised a high-throughput computational approach that identified moexipril, a well tolerated and safe angiotensin-converting enzyme (ACE) inhibitor, as a PDE4 inhibitor. Experimentally we showed that moexipril and two structurally related analogues acted in the micro molar range to inhibit PDE4 activity. Employing a FRET-based biosensor constructed from the nucleotide binding domain of the type 1 exchange protein activated by cAMP, EPAC1, we demonstrated that moexipril markedly potentiated the ability of forskolin to increase intracellular cAMP levels. Finally, we demonstrated that the PDE4 inhibitory effect of moexipril is functionally able to induce phosphorylation of the Hsp20 by cAMP dependent protein kinase A. Our data suggest that moexipril is a bona fide PDE4 inhibitor that may provide the starting point for development of novel PDE4 inhibitors with an improved therapeutic window

Scale-free static and dynamical correlations in melts of monodisperse and Flory-distributed homopolymers: A review of recent bond-fluctuation model studies

It has been assumed until very recently that all long-range correlations are screened in three-dimensional melts of linear homopolymers on distances beyond the correlation length $\xi$ characterizing the decay of the density fluctuations. Summarizing simulation results obtained by means of a variant of the bond-fluctuation model with finite monomer excluded volume interactions and topology violating local and global Monte Carlo moves, we show that due to an interplay of the chain connectivity and the incompressibility constraint, both static and dynamical correlations arise on distances $r \gg \xi$. These correlations are scale-free and, surprisingly, do not depend explicitly on the compressibility of the solution. Both monodisperse and (essentially) Flory-distributed equilibrium polymers are considered.Comment: 60 pages, 49 figure