Timing verification of dynamically reconfigurable logic for Xilinx Virtex FPGA series

This paper reports on a method for extending existing VHDL design and verification software available for the Xilinx Virtex series of FPGAs. It allows the designer to apply standard hardware design and verification tools to the design of dynamically reconfigurable logic (DRL). The technique involves the conversion of a dynamic design into multiple static designs, suitable for input to standard synthesis and APR tools. For timing and functional verification after APR, the sections of the design can then be recombined into a single dynamic system. The technique has been automated by extending an existing DRL design tool named DCSTech, which is part of the Dynamic Circuit Switching (DCS) CAD framework. The principles behind the tools are generic and should be readily extensible to other architectures and CAD toolsets. Implementation of the dynamic system involves the production of partial configuration bitstreams to load sections of circuitry. The process of creating such bitstreams, the final stage of our design flow, is summarized

Predicting the behaviour of near-critical and supercritical alcohols at microwave frequencies: Validation of molecular dynamic simulations as a tool that can substitute for measurements under extreme experimental conditions

Equilibrium and non-equilibrium molecular dynamic simulations, predicting the dielectric properties of near-critical and supercritical methanol and ethanol at microwave frequencies have been carried out. The autocorrelation functions of the dielectric relaxation, show dependency on the slow component at the near-critical region for both alcohols. At the supercritical region, two competing relaxation mechanisms are observed, related to the large breakdown of the hydrogen-bonding network and the degree of clustering between the molecules. This approach closely matches experimental data at microwave frequencies and identical temperature and pressure conditions, validating the predictions of how the molecular structure and dynamics manifest themselves into the complex permittivity and dielectric relaxation behaviour. Thus, introducing a modelling-based solution to deliver accurate dielectric property values for materials at supercritical conditions for “a priori” screening of solvents, whilst removing the need to overcome engineering and safety challenges associated with the development of experimental equipment to practically generate such data

The holistic phase model of early adult crisis

The objective of the current study was to explore the structural, temporal and experiential manifestations of crisis episodes in early adulthood, using a holistic-systemic theoretical framework. Based on an analysis of 50 interviews with individuals about a crisis episode between the ages of 25 and 35, a holistic model was developed. The model comprises four phases: (1) Locked-in, (2) Separation/Time-out, (3) Exploration and (4) Rebuilding, which in turn have characteristic features at four levels—person-in-environment, identity, motivation and affect-cognition. A crisis starts out with a commitment at work or home that has been made but is no longer desired, and this is followed by an emotionally volatile period of change as that commitment is terminated. The positive trajectory of crisis involves movement through an exploratory period towards active rebuilding of a new commitment, but ‘fast-forward’ and ‘relapse’ loops can interrupt Phases 3 and 4 and make a positive resolution of the episode less likely. The model shows conceptual links with life stage theories of emerging adulthood and early adulthood, and it extends current understandings of the transitional developmental challenges that young adults encounter

Investigation of High Power Impulse Magnetron Sputtering deposited nanoscale CrN/NbN multilayer coating for tribocorrosion resistance

Recycling equipment (waste/sea water/chemicals) need high tribocorrosion resistance. In this work High Power Impulse Magnetron Sputtering technique deposited nanoscale CrN/NbN multilayer coating for tribocorrosion resistance is explored. Sliding-wear experiments were conducted on CrN/NbN coated High Speed Steel (HSS) test coupons with an alumina (Al2O3) ball as a counterpart in a corrosive environment (3.5% NaCl solution) under potentiodynamic and potentiostatic conditions. Results reveal that coated substrates exhibited (by a factor of 3) lower corrosion currents and high tribo-corrosion resistance (Kc = 2 × 10−15 m3N−1m−1) as compared to uncoated HSS specimens. The alumina counterpart exhibited negligible wear in all the tests. Superior adhesion and dense microstructure consisting of flat and well-defined hard nitride nanolayers leads to stable friction coefficients and retain the unique nanoscale layer-by-layer wear mechanism without delamination. Effect of corrosion on friction coefficients, wear mechanisms and vice versa has been presented

A method for the reconstruction of unknown non-monotonic growth functions in the chemostat

We propose an adaptive control law that allows one to identify unstable steady states of the open-loop system in the single-species chemostat model without the knowledge of the growth function. We then show how one can use this control law to trace out (reconstruct) the whole graph of the growth function. The process of tracing out the graph can be performed either continuously or step-wise. We present and compare both approaches. Even in the case of two species in competition, which is not directly accessible with our approach due to lack of controllability, feedback control improves identifiability of the non-dominant growth rate.Comment: expansion of ideas from proceedings paper (17 pages, 8 figures), proceedings paper is version v

Mapping species distributions: A comparison of skilled naturalist and lay citizen science recording

To assess the ability of traditional biological recording schemes and lay citizen science approaches to gather data on species distributions and changes therein, we examined bumblebee records from the UK’s national repository (National Biodiversity Network) and from BeeWatch. The two recording approaches revealed similar relative abundances of bumblebee species but different geographical distributions. For the widespread common carder (Bombus pascuorum), traditional recording scheme data were patchy, both spatially and temporally, reflecting active record centre rather than species distribution. Lay citizen science records displayed more extensive geographic coverage, reflecting human population density, thus offering better opportunities to account for recording effort. For the rapidly spreading tree bumblebee (Bombus hypnorum), both recording approaches revealed similar distributions due to a dedicated mapping project which overcame the patchy nature of naturalist records. We recommend, where possible, complementing skilled naturalist recording with lay citizen science programmes to obtain a nation-wide capability, and stress the need for timely uploading of data to the national repository

Assessing health centre systems for guiding improvement in diabetes care

BACKGROUND: Aboriginal people in Australia experience the highest prevalence of diabetes in the country, an excess of preventable complications and early death. There is increasing evidence demonstrating the importance of healthcare systems for improvement of chronic illness care. The aims of this study were to assess the status of systems for chronic illness care in Aboriginal community health centres, and to explore whether more developed systems were associated with better quality of diabetes care. METHODS: This cross-sectional study was conducted in 12 Aboriginal community health centres in the Northern Territory of Australia. Assessment of Chronic Illness Care scale was adapted to measure system development in health centres, and administered by interview with health centre staff and managers. Based on a random sample of 295 clinical records from attending clients with diagnosed type 2 diabetes, processes of diabetes care were measured by rating of health service delivery against best-practice guidelines. Intermediate outcomes included the control of HbA1c, blood pressure, and total cholesterol. RESULTS: Health centre systems were in the low to mid-range of development and had distinct areas of strength and weakness. Four of the six system components were independently associated with quality of diabetes care: an increase of 1 unit of score for organisational influence, community linkages, and clinical information systems, respectively, was associated with 4.3%, 3.8%, and 4.5% improvement in adherence to process standards; likewise, organisational influence, delivery system design and clinical information systems were related to control of HbA1c, blood pressure, and total cholesterol. CONCLUSION: The state of development of health centre systems is reflected in quality of care outcome measures for patients. The health centre systems assessment tool should be useful in assessing and guiding development of systems for improvement of diabetes care in similar settings in Australia and internationally

Performance of a high resolution chemically amplified electron beam resist at various beam energies

A novel negative tone molecular resist molecule featuring a tert-butyloxycarbonyl protected phenol malonate group bonded to a 1,8-Diazabicycloundece-7-ene is presented. The resist shows high-resolution capability in electron beam lithography at a range of beam energies. The resist demonstrated a sensitivity of 18.7 μC/cm2 at 20 kV. Dense features with a line width of 15 nm have been demonstrated at 30 kV, whilst a feature size of 12.5 nm was achieved for dense lines at 100 kV

Dementia Care Mapping™ to reduce agitation in care home residents with dementia: the EPIC cluster RCT

Background The quality of care for people with dementia in care homes is of concern. Interventions that can improve care outcomes are required. Objective To investigate the clinical effectiveness and cost-effectiveness of Dementia Care Mapping™ (DCM) for reducing agitation and improving care outcomes for people living with dementia in care homes, versus usual care. Design A pragmatic, cluster randomised controlled trial with an open-cohort design, follow-up at 6 and 16 months, integrated cost-effectiveness analysis and process evaluation. Clusters were not blinded to allocation. The primary end point was completed by staff proxy and independent assessors. Setting Stratified randomisation of 50 care homes to the intervention and control groups on a 3 : 2 ratio by type, size, staff exposure to dementia training and recruiting hub. Participants Fifty care homes were randomised (intervention, n = 31; control, n = 19), with 726 residents recruited at baseline and a further 261 recruited after 16 months. Care homes were eligible if they recruited a minimum of 10 residents, were not subject to improvement notices, had not used DCM in the previous 18 months and were not participating in conflicting research. Residents were eligible if they lived there permanently, had a formal diagnosis of dementia or a score of 4+ on the Functional Assessment Staging Test of Alzheimer’s Disease, were proficient in English and were not terminally ill or permanently cared for in bed. All homes were audited on the delivery of dementia and person-centred care awareness training. Those not reaching a minimum standard were provided training ahead of randomisation. Eighteen homes took part in the process evaluation. Intervention Two staff members from each intervention home were trained to use DCM and were asked to carry out three DCM cycles; the first was supported by an external expert. Main outcome measures The primary outcome was agitation (Cohen-Mansfield Agitation Inventory), measured at 16 months. Secondary outcomes included resident behaviours and quality of life. Results There were 675 residents in the final analysis (intervention, n = 388; control, n = 287). There was no evidence of a difference in agitation levels between the treatment arms. The adjusted mean difference in Cohen-Mansfield Agitation Inventory score was –2.11 points, being lower in the intervention group than in the control (95% confidence interval –4.66 to 0.44; p = 0.104; adjusted intracluster correlation coefficient: control = 0, intervention = 0.001). The sensitivity analyses results supported the primary analysis. No differences were detected in any of the secondary outcomes. The health economic analyses indicated that DCM was not cost-effective. Intervention adherence was problematic; only 26% of homes completed more than their first DCM cycle. Impacts, barriers to and facilitators of DCM implementation were identified. Limitations The primary completion of resident outcomes was by staff proxy, owing to self-report difficulties for residents with advanced dementia. Clusters were not blinded to allocation, although supportive analyses suggested that any reporting bias was not clinically important. Conclusions There was no benefit of DCM over control for any outcomes. The implementation of DCM by care home staff was suboptimal compared with the protocol in the majority of homes. Future work Alternative models of DCM implementation should be considered that do not rely solely on leadership by care home staff. Trial registration Current Controlled Trials ISRCTN82288852. Funding This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 24, No. 16. See the NIHR Journals Library website for further project information

Study protocol: Audit and Best Practice for Chronic Disease Extension (ABCDE) Project

<p>Abstract</p> <p>Background</p> <p>A growing body of international literature points to the importance of a system approach to improve the quality of care in primary health care settings. Continuous Quality Improvement (CQI) concepts and techniques provide a theoretically coherent and practical way for primary care organisations to identify, address, and overcome the barriers to improvements. The Audit and Best Practice for Chronic Disease (ABCD) study, a CQI-based quality improvement project conducted in Australia's Northern Territory, has demonstrated significant improvements in primary care service systems, in the quality of clinical service delivery and in patient outcomes related to chronic illness care. The aims of the extension phase of this study are to examine factors that influence uptake and sustainability of this type of CQI activity in a variety of Indigenous primary health care organisations in Australia, and to assess the impact of collaborative CQI approaches on prevention and management of chronic illness and health outcomes in Indigenous communities.</p> <p>Methods/design</p> <p>The study will be conducted in 40–50 Indigenous community health centres from 4 States/Territories (Northern Territory, Western Australia, New South Wales and Queensland) over a five year period. The project will adopt a participatory, quality improvement approach that features annual cycles of: 1) organisational system assessment and audits of clinical records; 2) feedback to and interpretation of results with participating health centre staff; 3) action planning and goal setting by health centre staff to achieve system changes; and 4) implementation of strategies for change. System assessment will be carried out using a System Assessment Tool and in-depth interviews of key informants. Clinical audit tools include two essential tools that focus on diabetes care audit and preventive service audit, and several optional tools focusing on audits of hypertension, heart disease, renal disease, primary mental health care and health promotion.</p> <p>The project will be carried out in a form of collaborative characterised by a sequence of annual learning cycles with action periods for CQI activities between each learning cycle.</p> <p>Key outcome measures include uptake and integration of CQI activities into routine service activity, state of system development, delivery of evidence-based services, intermediate patient outcomes (e.g. blood pressure and glucose control), and health outcomes (complications, hospitalisations and mortality).</p> <p>Conclusion</p> <p>The ABCD Extension project will contribute directly to the evidence base on effectiveness of collaborative CQI approaches on prevention and management of chronic disease in Australia's Indigenous communities, and to inform the operational and policy environments that are required to incorporate CQI activities into routine practice.</p