May measurement month 2018: an analysis of blood pressure screening results from Colombia

High blood pressure (BP) is the leading global preventable cause of death and the most common risk factor for cardiovascular disease (CVD). However, due to its asymptomatic nature, the lack of awareness of this condition causes underdiagnosis and low rates of adherence to pharmacological treatment. Looking for practical approaches to increase awareness worldwide, the International Society of Hypertension (ISH) implemented the 2nd May Measurement Month campaign in 2018 (MMM18). In order to contribute to this initiative, Colombia participated as one of the 89 countries involved in this hypertension screening programme. Blood pressure was measured in subjects from 11 departments in Colombia. Under the leadership of the Fundacio´n Oftalmolo´gica de Santander (FOSCAL), 400 volunteers across the country collected the data following the MMM protocol. Measurements from 35 548 participants with a mean age of 41.9 years were obtained. In total, 9475 (26.7%) of the total population studied had hypertension. Of those with hypertension, 69.9% of these subjects were aware of their condition, 65.0% were on antihypertensive medication, and 43.1% had controlled BP. Of those on medication, 66.3% had controlled BP. Hypertension screening, awareness, treatment, and control should be a priority in public health objectives due to its elevated burden of disease and direct association with increased CVD. The MMM campaign provided a positive impact in the diagnosis of hypertension across Colombia. Although efforts are being made to expand treatment capability and adherence, still more are needed to insure a broader coverage of antihypertensive medication in Colombia

Contribution of common and rare variants to bipolar disorder susceptibility in extended pedigrees from population isolates.

Current evidence from case/control studies indicates that genetic risk for psychiatric disorders derives primarily from numerous common variants, each with a small phenotypic impact. The literature describing apparent segregation of bipolar disorder (BP) in numerous multigenerational pedigrees suggests that, in such families, large-effect inherited variants might play a greater role. To identify roles of rare and common variants on BP, we conducted genetic analyses in 26 Colombia and Costa Rica pedigrees ascertained for bipolar disorder 1 (BP1), the most severe and heritable form of BP. In these pedigrees, we performed microarray SNP genotyping of 838 individuals and high-coverage whole-genome sequencing of 449 individuals. We compared polygenic risk scores (PRS), estimated using the latest BP1 genome-wide association study (GWAS) summary statistics, between BP1 individuals and related controls. We also evaluated whether BP1 individuals had a higher burden of rare deleterious single-nucleotide variants (SNVs) and rare copy number variants (CNVs) in a set of genes related to BP1. We found that compared with unaffected relatives, BP1 individuals had higher PRS estimated from BP1 GWAS statistics (P = 0.001 ~ 0.007) and displayed modest increase in burdens of rare deleterious SNVs (P = 0.047) and rare CNVs (P = 0.002 ~ 0.033) in genes related to BP1. We did not observe rare variants segregating in the pedigrees. These results suggest that small-to-moderate effect rare and common variants are more likely to contribute to BP1 risk in these extended pedigrees than a few large-effect rare variants

Beauveria bassiana and Metarhizium anisopliae endophytically colonize cassava roots following soil drench inoculation

AbstractWe investigated the fungal entomopathogens Beauveria bassiana and Metarhizium anisopliae to determine if endophytic colonization could be achieved in cassava. An inoculation method based on drenching the soil around cassava stem cuttings using conidial suspensions resulted in endophytic colonization of cassava roots by both entomopathogens, though neither was found in the leaves or stems of the treated cassava plants. Both fungal entomopathogens were detected more often in the proximal end of the root than in the distal end. Colonization levels of B. bassiana were higher when plants were sampled at 7–9days post-inoculation (84%) compared to 47–49days post-inoculation (40%). In contrast, the colonization levels of M. anisopliae remained constant from 7–9days post-inoculation (80%) to 47–49days post-inoculation (80%), which suggests M. anisopliae is better able to persist in the soil, or as an endophyte in cassava roots over time. Differences in colonization success and plant growth were found among the fungal entomopathogen treatments

Lancet commission on hypertension group position statement on the global improvement of accuracy standards for devices that measure blood pressure

The Lancet Commission on Hypertension identified that a key action to address the worldwide burden of high blood pressure (BP) was to improve the quality of BP measurements by using BP devices that have been validated for accuracy. Currently, there are over 3000 commercially available BP devices, but many do not have published data on accuracy testing according to established scientific standards. This problem is enabled through weak or absent regulations that allow clearance of devices for commercial use without formal validation. In addition, new BP technologies have emerged (e.g. cuffless sensors) for which there is no scientific consensus regarding BP measurement accuracy standards. Altogether, these issues contribute to the widespread availability of clinic and home BP devices with limited or uncertain accuracy, leading to inappropriate hypertension diagnosis, management and drug treatment on a global scale. The most significant problems relating to the accuracy of BP devices can be resolved by the regulatory requirement for mandatory independent validation of BP devices according to the universally-accepted International Organisation for Standardization Standard. This is a primary recommendation for which there is an urgent international need. Other key recommendations are development of validation standards specifically for new BP technologies and online lists of accurate devices that are accessible to consumers and health professionals. Recommendations are aligned with WHO policies on medical devices and universal healthcare. Adherence to recommendations would increase the global availability of accurate BP devices and result in better diagnosis and treatment of hypertension, thus decreasing the worldwide burden from high BP

Total cardiovascular or fatal events in people with type 2 diabetes and cardiovascular risk factors treated with dulaglutide in the REWIND trail:a post hoc analysis

Abstract Background The Researching cardiovascular Events with a Weekly INcretin in Diabetes (REWIND) double blind randomized trial demonstrated that weekly subcutaneous dulaglutide 1.5 mg, a glucagon like peptide-1 receptor agonist, versus matched placebo reduced the first outcome of major adverse cardiovascular event (MACE), cardiovascular death, nonfatal myocardial infarction or nonfatal stroke (594 versus 663 events) in 9901 persons with type 2 diabetes and either chronic cardiovascular disease or risk factors, and followed during 5.4 years. These findings were based on a time-to-first-event analysis and preclude relevant information on the burden of total major events occurring during the trial. This analysis reports on the total cardiovascular or fatal events in the REWIND participants Methods We compared the total incidence of MACE or non-cardiovascular deaths, and the total incidence of expanded MACE (MACE, unstable angina, heart failure or revascularization) or non-cardiovascular deaths between participants randomized to dulaglutide and those randomized to placebo. Incidences were expressed as number per 1000 person-years. Hazard ratios (HR) were calculated using the conditional time gap and proportional means models. Results Participants had a mean age of 66.2 years, 46.3% were women and 31% had previous cardiovascular disease. During the trial there were 1972 MACE or non-cardiovascular deaths and 3673 expanded MACE or non-cardiovascular deaths. The incidence of total MACE or non-cardiovascular deaths in the dulaglutide and placebo groups was 35.8 and 40.3 per 1000 person-years, respectively [absolute reduction = 4.5 per 1000 person-years; conditional time gap HR 0.90 (95% CI, 0.82–0.98) p = 0.020, and proportional means HR 0.89 (95% CI, 0.80–0.98) p = 0.022]. The incidence of total expanded MACE or non-cardiovascular deaths in the dulaglutide and placebo groups was 67.1 and 74.7 per 1000 person-years, respectively [absolute reduction = 7.6 per 1000 person-years; conditional time gap HR 0.93 (95% CI, 0.87–0.99) p = 0.023, and proportional means HR 0.90 (95% CI, 0.82–0.99) p = 0.028]. Conclusions These findings suggest that weekly subcutaneous dulaglutide reduced total cardiovascular or fatal event burden in people with type 2 diabetes at moderate cardiovascular risk. Clinical Trial Registration: https://www.clinicaltrials.gouv . Unique Identifier NCT01394952)

Reply to: New Meta- and Mega-analyses of Magnetic Resonance Imaging Findings in Schizophrenia: Do They Really Increase Our Knowledge About the Nature of the Disease Process?

This work was supported by National Institute of Biomedical Imaging and Bioengineering Grant No. U54EB020403 (to the ENIGMA consortium)

Computational investigation of diesel nozzle internal flow during the complete injection event

[EN] Currently, diesel engines are calibrated using more and more complex multiple injection strategies. Under these conditions, the characteristics of the flow exiting the fuel injector are strongly affected by the transient interaction between the needle, the sac volume and the orifices, which are not yet clear. In the current paper, a methodology combining a 1D injector model and 3D-CFD simulations is proposed. First, the characteristics of the nozzle flow have been experimentally assessed in transient conditions by means of injection rate and momentum flux measurements. Later, the 3D-CFD modeling approach has been validated at steady-state fixed lift conditions. Finally, a previously developed 1D injector model has been used to extract the needle lift profiles and transient pressure boundary conditions used for the full-transient 3D-CFD simulations, using adaptive mesh refinement (AMR) strategies to be able to simulate the complete injection rate starting from 1 mu m lift.This work was partly sponsored by "Ministerio de Economia y Competitividad'', of the Spanish Government, in the frame of the Project "Estudio de la interaccion chorro-pared en condiciones realistas de motor'', Reference TRA2015-67679-c2-1-R. The authors would like also to thank the computer resources, technical expertise and assistance provided by Universidad de Valencia in the use of the supercomputer "Tirant''. Mr. Jaramillo's Thesis is funded by "Conselleria d'Educacio, Cultura i Esports'' of Generalitat Valenciana in the frame of the program "Programa VALI + D para investigadores en formacion, Reference ACIF/2015/040.Salvador, FJ.; De La Morena, J.; Bracho Leon, G.; Jaramillo-Císcar, D. (2018). Computational investigation of diesel nozzle internal flow during the complete injection event. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40(3):153-167. https://doi.org/10.1007/s40430-018-1074-zS153167403Hall CAS, Lambert JG, Balogh SB (2014) EROI of different fuels and the implications for society. Energy Policy 64:141–152. https://doi.org/10.1016/j.enpol.2013.05.049Lujan JM, Tormos B, Salvador FJ, Gargar K (2009) Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: preliminary study (I). Biomass Bioenergy 33:941–947. https://doi.org/10.1016/j.biombioe.2009.02.004Pickett LM, Siebers DL (2004) Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure. Combust Flame 138:114–135. https://doi.org/10.1016/j.combustflame.2004.04.006Dec JE (1997) A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging. SAE Tech. Pap. 970873Wang X, Huang Z, Zhang W et al (2011) Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray. Appl Energy 88:1620–1628. https://doi.org/10.1016/j.apenergy.2010.11.035Sayin C, Gumus M, Canakci M (2013) Influence of injector hole number on the performance and emissions of a di diesel engine fueled with biodiesel-diesel fuel blends. Appl Therm Eng 61:121–128. https://doi.org/10.1016/j.applthermaleng.2013.07.038Mohan B, Yang W, Chou SK (2013) Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review. Renew Sustain Energy Rev 28:664–676. https://doi.org/10.1016/j.rser.2013.08.051Payri R, Salvador FJ, Gimeno J, De la Morena J (2011) Influence of injector technology on injection and combustion development, Part 1: hydraulic characterization. Appl Energy 88:1068–1074. https://doi.org/10.1016/j.apenergy.2010.10.012Park SW, Kim JW, Lee CS (2006) Effect of injector type on fuel-air mixture formation of high-speed diesel sprays. Proc Inst Mech Eng D 220:647–659. https://doi.org/10.1243/09544070D20304Moon S, Komada K, Sato K et al (2015) Ultrafast X-ray study of multi-hole GDI injector sprays: effects of nozzle hole length and number on initial spray formation. Exp Therm Fluid Sci 68:68–81. https://doi.org/10.1016/j.expthermflusci.2015.03.027Powell CF, Kastengren AL, Liu Z, Fezzaa K (2010) The effects of diesel injector needle motion on spray structure. J Eng Gas Turbines Power 133:12802. https://doi.org/10.1115/1.4001073Huang W, Moon S, Ohsawa K (2016) Near-nozzle dynamics of diesel spray under varied needle lifts and its prediction using analytical model. Fuel 180:292–300. https://doi.org/10.1016/j.fuel.2016.04.042Sun Z-Y, Li G-X, Chen C et al (2015) Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine. Energy Convers Manag 89:843–861. https://doi.org/10.1016/j.enconman.2014.10.047Devassy BM, Habchi C, Daniel E (2015) Atomization modelling of liquid jets using a two-surface density approach. At Sprays 25:47–80Moon S, Gao Y, Park S et al (2015) Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection. Fuel 150:112–122. https://doi.org/10.1016/j.fuel.2015.01.097Payri R, Salvador FJ, Carreres M, De la Morena J (2016) Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis. Energy Convers Manag 114:376–391. https://doi.org/10.1016/j.enconman.2016.02.043Plamondon E, Seers P (2014) Development of a simplified dynamic model for a piezoelectric injector using multiple injection strategies with biodiesel/diesel-fuel blends. Appl Energy 131:411–424. https://doi.org/10.1016/j.apenergy.2014.06.039Postrioti L, Malaguti S, Bosi M et al (2014) Experimental and numerical characterization of a direct solenoid actuation injector for diesel engine applications. Fuel 118:316–328. https://doi.org/10.1016/j.fuel.2013.11.001Desantes JM, Salvador FJ, Lopez JJ, De la Morena J (2011) Study of mass and momentum transfer in diesel sprays based on X-ray mass distribution measurements and on a theoretical derivation. Exp Fluids 50:233–246. https://doi.org/10.1007/s00348-010-0919-8De la Morena J, Neroorkar K, Plazas AH et al (2013) Numerical analysis of the influence of diesel nozzle design on internal flow characteristics for 2-valve diesel engine application. At Sprays 23:97–118. https://doi.org/10.1615/AtomizSpr.2013006361Duke DJ, Schmidt DP, Neroorkar K et al (2013) High-resolution large eddy simulations of cavitating gasoline-ethanol blends. Int J Engine Res 14:578–589. https://doi.org/10.1177/1468087413501824Mitroglou N, McLorn M, Gavaises M et al (2014) Instantaneous and ensemble average cavitation structures in diesel micro-channel flow orifices. Fuel 116:736–742. https://doi.org/10.1016/j.fuel.2013.08.060Wang X, Li K, Su W (2012) Experimental and numerical investigations on internal flow characteristics of diesel nozzle under real fuel injection conditions. Exp Therm Fluid Sci 42:204–211. https://doi.org/10.1016/j.expthermflusci.2012.04.022Sou A, Pratama RH (2016) Effects of asymmetric inflow on cavitation in fuel injector and discharged liquid jet. At Sprays 26:939–959. https://doi.org/10.1615/AtomizSpr.2015013501Xue Q, Battistoni M, Powell CF et al (2015) An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines. Int J Multiph Flow 70:77–88. https://doi.org/10.1016/j.ijmultiphaseflow.2014.11.012Castilla R, Gamez-Montero PJ, Ertrk N et al (2010) Numerical simulation of turbulent flow in the suction chamber of a gearpump using deforming mesh and mesh replacement. Int J Mech Sci 52:1334–1342. https://doi.org/10.1016/j.ijmecsci.2010.06.009Parlak Z, Engin T (2012) Time-dependent CFD and quasi-static analysis of magnetorheological fluid dampers with experimental validation. Int J Mech Sci 64:22–31. https://doi.org/10.1016/j.ijmecsci.2012.08.006Chiatti G, Chiavola O, Palmieri F (2009) Spray modeling for diesel engine performance analysis. SAE Tech Pap 2009-01-0835. https://doi.org/10.4271/2009-01-0835Marcer R, Audiffren C, Viel A, et al (2010) Coupling 1D system AMESim and 3D CFD EOLE models for diesel injection simulation Renault. In: ILASS—Eur. 2010, 23rd Annu. Conf. Liq. At. Spray Syst., pp 1–10Desantes JM, Salvador FJ, Carreres M, Martínez-López J (2014) Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles. Proc Inst Mech Eng D 229:407–423. https://doi.org/10.1177/0954407014542627Battistoni M, Xue Q, Som S (2016) Large-eddy simulation (LES) of spray transients: start and end of injection phenomena. Oil Gas Sci Technol 71:24. https://doi.org/10.2516/ogst/2015024CONVERGE is a trade mark of convergent science. https://convergecfd.comMacian V, Bermúdez V, Payri R, Gimeno J (2003) New technique for determination of internal geometry of a diesel nozzle with the use of silicone methodology. Exp Tech 27:39–43. https://doi.org/10.1111/j.1747-1567.2003.tb00107.xDabiri S, Sirignano WA, Joseph DD (2007) Cavitation in an orifice flow. Phys Fluids 19:72112. https://doi.org/10.1063/1.2750655Mohan B, Yang W, Chou SK (2014) Cavitation in injector nozzle holes—a parametric study. Eng Appl Comput Fluid Mech 8:70–81Salvador FJ, Hoyas S, Novella R, Martinez-Lopez J (2011) Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles. Proc Inst Mech Eng D 225:545–563. https://doi.org/10.1177/09544070JAUTO1569Som S, Longman DE, Ramirez AI, Aggarwal S (2012) Influence of nozzle orifice geometry and fuel properties on flow and cavitation characteristics of a diesel injector. In: Fuel Inject. Automot. Eng., pp 112–126Desantes JM, Salvador FJ, Carreres M, Jaramillo D (2015) Experimental characterization of the thermodynamic properties of diesel fuels over a wide range of pressures and temperatures. SAE Int J Fuels Lubr 8:2015-01-0951. https://doi.org/10.4271/2015-01-0951Bosch W (1966) The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection. SAE Pap. 660749Payri R, Salvador FJ, Gimeno J, Bracho G (2008) A new methodology for correcting the signal cumulative phenomenon on injection rate measurements. Exp Tech 32:46–49. https://doi.org/10.1111/j.1747-1567.2007.00188.xPayri F, Payri R, Salvador FJ, Martínez-López J (2011) A contribution to the understanding of cavitation effects in diesel injector nozzles through a combined experimental and computational investigation. Comput Fluids 58:88–101. https://doi.org/10.1016/j.compfluid.2012.01.005Lichtarowicz AK, Duggins RK, Markland E (1965) Discharge coefficients for incompressible non-cavitating flow through long orifices. J Mech Eng Sci 7:210–219. https://doi.org/10.1243/JMES_JOUR_1965_007_029_02Lopez JJ, Salvador FJ, De la Garza OA, Arrègle J (2012) Characterization of the pressure losses in a common rail diesel injector. Proc Inst Mech Eng D 226:1697–1706. https://doi.org/10.1177/0954407012447020Salvador FJ, Carreres M, Jaramillo D, Martínez-López J (2015) Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics. Energy Convers Manag 103:284–299. https://doi.org/10.1016/j.enconman.2015.05.062LMS (2010) Imagine.Lab AMESim v.10. User’s manualPayri R, Salvador FJ, Martí-Aldaraví P, Martínez-López J (2012) Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: detailed injection system model. Energy Convers Manag 54:90–99. https://doi.org/10.1016/j.enconman.2011.10.00