Microstructural evolution of mechanically deformed polycrystalline silicon for kerfless photovoltaics

Silicon wafers for photovoltaics could be produced without kerf loss by rolling, provided sufficient control of defects such as dislocations can be achieved. A study using mainly high resolution electron backscatter diffraction (HR‐EBSD) of the microstructural evolution of Siemens polycrystalline silicon feedstock during a series of processes designed to mimic high temperature rolling is reported here. The starting material is heavily textured and annealing at 1400 °C results in 90% recrystallization and a reduction in average geometrically necessary dislocation (GND) density from >1014 to 1013 m−2. Subsequent compression at 1150 °C – analogous to rolling – produce sub‐grain boundaries seen as continuous curved high GND content linear features spanning grain interiors. Post‐deformation annealing at 1400 °C facilitates a secondary recrystallization process, resulting in large grains typically of 100 μm diameter. HR‐EBSD gives the final average GND density in as 3.2 × 1012 m−2. This value is considerably higher than the dislocation density of 5 × 1010 m−2 from etch pit counting, so the discrepancy is investigated by direct comparison of GND maps and etch pit patterns. The GND map from HR‐EBSD gives erroneously high values at the method's noise floor (≈1012 m−2) in regions with low dislocation densities

To what extent is behaviour a problem in English schools?:Exploring the scale and prevalence of deficits in classroom climate

The working atmosphere in the classroom is an important variable in the process of education in schools, with several studies suggesting that classroom climate is an important influence on pupil attainment. There are wide differences in the extent to which classroom climate is considered to be a problem in English schools. Some ‘official’ reports suggest that behaviour in schools is ‘satisfactory or better’ in the vast majority of schools; other sources have pointed to behaviour being a serious and widespread problem. The paper details four studies conducted over the past decade which aimed to explore these disparities. The aim of the research was to gain a more accurate insight into the extent to which deficits in classroom climate limit educational attainment and equality of educational opportunity in English schools. The findings question the suggestion that behaviour is satisfactory or better in 99.7% of English schools and the concluding section suggests ways in which deficits in classroom climate might be addressed. Although the study is limited to classrooms in England, OECD studies suggest that deficits in the working atmosphere in classrooms occur in many countries. The study therefore has potential relevance for education systems in other countries

TQM implementation: An empirical examination and proposed generic model

Total quality management (TQM) is considered by many as an important quality and business performance improvement tool. The popularity of the concept has led to an explosion of TQM related literature. A careful review of the literature suggests that most publications recount the experiences or perceptions of the authors or deal with single case organisations. Furthermore, there is a dearth of empirical research and literature dealing with TQM's implementation process. This paper reports the findings of a research project that empirically examined the process of TQM implementation in a sample of organisations widely regarded as leading exponents of TQM. The paper presents a non-prescriptive model of the TQM implementation process derived from the findings and proposes an "outcome driven" approach as an alternative to the more commonplace TQM implementation strategies

Evidence of altered fatty acid metabolism in dogs with naturally occurring valvular heart disease and congestive heart failure

Introduction Myxomatous mitral valve disease (MMVD) is the most common cardiac condition in adult dogs. The disease progresses over several years and affected dogs may develop congestive heart failure (HF). Research has shown that myocardial metabolism is altered in cardiac disease, leading to a reduction in β-oxidation of fatty acids and an increased dependence upon glycolysis. Objectives This study aimed to evaluate whether a shift in substrate use occurs in canine patients with MMVD; a naturally occurring model of human disease. Methods Client-owned dogs were longitudinally evaluated at a research clinic in London, UK and paired serum samples were selected from visits when patients were in ACVIM stage B1: asymptomatic disease without cardiomegaly, and stage C: HF. Samples were processed using ultra-performance liquid chromatography mass spectrometry and lipid profiles were compared using mixed effects models with false discovery rate adjustment. The effect of disease stage was evaluated with patient breed entered as a confounder. Features that significantly differed were screened for selection for annotation efforts using reference databases. Results Dogs in HF had altered concentrations of lipid species belonging to several classes previously associated with cardiovascular disease. Concentrations of certain acylcarnitines, phospholipids and sphingomyelins were increased after individuals had developed HF, whilst some ceramides and lysophosphatidylcholines decreased. Conclusions The canine metabolome appears to change as MMVD progresses. Findings from this study suggest that in HF myocardial metabolism may be characterised by reduced β-oxidation. This proposed explanation warrants further research

Specimen preparation methods for elemental characterisation of grain boundaries and isolated dislocations in multicrystalline silicon using atom probe tomography

Multicrystalline silicon (mc-Si) is a cost effective feedstock for solar photovoltaic devices but is limited by the presence of defects and impurities. Imaging impurities segregated to nanometre-scale dislocations and grain boundaries is a challenge that few materials characterisation techniques can achieve. Atom Probe Tomography (APT) is a 3-dimensional time-of-flight microscopy technique that can image the distribution of elements at the atomic scale, however one of the most challenging factors when using APT is the complexity of specimen preparation for specific regions of interest. Atom probe specimen preparation methods have been developed in a dual FIB/SEM system that enable a specific extended defect such as an isolated dislocation or a section of a grain boundary to be selected for APT analysis. The methods were used to fabricate APT specimens from an isolated dislocation and a grain boundary in mc-Si samples. Complementary TEM images confirm the presence of the defects in both specimens, whilst APT analyses also reveal segregation of impurities to the defects

Towards high efficiency inversion layer cells based on ion-charged dielectrics

This work investigates the production and performance of p-type Inversion Layer (IL) Si solar cells, manufactured with an ion-injection technique that produces a highly charged dielectric nanolayer. Ions are applied to the front dielectric layer and then driven towards the c-Si/SiO2 interface by an electric field before stabilisation with an anneal. As this process can be performed in minutes at temperatures below 500 °C, it potentially provides a fast, yet controllable way for IL cell manufacturing. We demonstrate by simulations using Sentaurus TCAD that for the 1 ·cm p-type Si/thermal oxide model defined in this work, the sheet resistance of the field-induced electron layer can reach 1.1 k/sq in the dark by reducing band-tail interface state density to below 1014 eV-1cm-2 and increasing the dielectric charge density to above 2 × 1013 cm-2. Additionally, we present a proof-of-concept p-type IL cell on a non-gettered, non-hydrogenated substrate with an efficiency of 10.8%, and an open-circuit voltage (VOC) equivalent to that in a cell with a diffused phosphorous emitter. Lastly, we perform Sentaurus TCAD simulations to assess the efficiency potential of such IL cells. By incorporating optimal passivation, gettering, hydrogenation and metallisation, IL cells are predicted to reach an efficiency of 24.5% on 5 ·cm, and beyond 24.8% on 10 ·cm p-type substrates, provided the dielectric charge density reaches 2 × 1013 cm-2, which has been experimentally demonstrated to be possible. IL cells are therefore, in principle, a potential competitive candidate in the photovoltaic industry

Development and characterisation of a large diameter decellularised vascular allograft

The aims of this study were to develop a biological large diameter vascular graft by decellularisation of native human aorta to remove the immunogenic cells whilst retaining the essential biomechanical, and biochemical properties for the ultimate benefit of patients with infected synthetic grafts. Donor aortas (n = 6) were subjected to an adaptation of a propriety decellularisation process to remove the cells and acellularity assessed by histological analysis and extraction and quantification of total DNA. The biocompatibility of the acellular aortas was determined using standard contact cytotoxicity tests. Collagen and denatured collagen content of aortas was determined and immunohistochemistry was used to determine the presence of specific extracellular matrix proteins. Donor aortas (n = 6) were divided into two, with one half subject to decellularisation and the other half retained as native tissue. The native and decellularised aorta sections were then subject to uniaxial tensile testing to failure [axial and circumferential directions] and suture retention testing. The data was compared using a paired t-test. Histological evaluation showed an absence of cells in the treated aortas and retention of histoarchitecture including elastin content. The decellularised aortas had less than 15 ng mg¯¹ total DNA per dry weight (mean 94% reduction) and were biocompatible as determined by in vitro contact cytotoxicity tests. There were no gross changes in the histoarchitecture [elastin and collagen matrix] of the acellular aortas compared to native controls. The decellularisation process also reduced calcium deposits within the tissue. The uniaxial tensile and suture retention testing revealed no significant differences in the material properties (p > 0.05) of decellularised aorta. The decellularisation procedure resulted in minimal changes to the biological and biomechanical properties of the donor aortas. Acellular donor aorta has excellent potential for use as a large diameter vascular graft

A Criterion for Brittle Failure of Rocks Using the Theory of Critical Distances

This paper presents a new analytical criterion for brittle failure of rocks and heavily overconsolidated soils. Griffith’s model of a randomly oriented defect under a biaxial stress state is used to keep the criterion simple. The Griffith’s criterion is improved because the maximum tensile strength is not evaluated at the boundary of the defect but at a certain distance from the boundary, known as the critical distance. This fracture criterion is known as the Point Method, and is part of the Theory of Critical Distances, which is utilized in fracture mechanics. The proposed failure criterion has two parameters: the inherent tensile strength, ó0, and the ratio of the half-length of the initial crack/flaw to the critical distance, a/L. These parameters are difficult to measure but they may be correlated with the uniaxial compressive and tensile strengths, óc and ót. The proposed criterion is able to reproduce the common range of strength ratios for rocks and heavily overconsolidated soils (óc/ót=3-50) and the influence of several microstructural rock properties, such as texture and porosity. Good agreement with laboratory tests reported in the literature is found for tensile and low confining stresses.The work presented was initiated during a research project on “Structural integrity assessments of notch-type defects", for the Spanish Ministry of Science and Innovation (Ref.: MAT2010-15721)