Mechanism for cross-linking polychloroprene with ethylene thiourea and zinc oxide

An investigation into the mechanism by which ethylene thiourea (ETU) cross-links polychloroprene (CR) in combination with zinc oxide (ZnO) was undertaken. This was achieved through an examination of the mechanisms of crosslinking CR with ETU and ZnO separately and in unison. Spectroscopic and physical characterization techniques were employed to probe the cross-linking mechanisms of CRusing other standard rubber accelerators and model compounds with analogous structures and functionalities to ETU. These investigations have resulted in the proposal of a new mechanism by which ETU and ZnO can synergistically cross-link CR, in addition to providing new evidence to support concomitant mechanisms already published for cross-linking CR

The Economic Value of Forage for Livestock on Public and Private Ranges in Utah

The United States Government controls about 359 million acres of land in the 11 Western States. This vast acreage produces recreation for vacationers, timber for lumbermen, water for city and rural consumption, forage for livestock and wildlife, and minerals for miners. In many cases, the users of these products are competing and are clamoring for a large share of this land. Consequently, land use is continually changing. Since 1941, the amount of timber cut has tripled, recreation has doubled, watersheds now yield a better quality of water (Clawson, 1957), forage for wildlife has increased but forage for livestock use has decreased. The public agencies (especially the U.S. Forest Service and the Bureau of Land Management) that administer this federally controlled land are vitally concerned about being able to effectively and fairly allocate its use. In order that decisions may be made in the light of economic criteria, these agencies are promoting studies in the area of each of the land uses listed above. In cases where society demands other than the greatest economic good, the costs of satisfying the right use needs to be determined

Self-scheduling of wind-thermal systems using a stochastic MILP approach

In this work a stochastic (Stoc) mixed-integer linear programming (MILP) approach for the coordinated trading of a price-taker thermal (Ther) and wind power (WP) producer taking part in a day-ahead market (DAM) electricity market (EMar) is presented. Uncertainty (Uncer) on electricity price (EPr) and WP is considered through established scenarios. Thermal units (TU) are modelled by variable costs, start-up (ST-UP) technical operating constraints and costs, such as: forbidden operating zones, minimum (Min) up/down time limits and ramp up/down limits. The goal is to obtain the optimal bidding strategy (OBS) and the maximization of profit (MPro). The wind-Ther coordinated configuration (CoConf) is modelled and compared with the unCoConf. The CoConf and unCoConf are compared and relevant conclusions are drawn from a case study

Personal health technologies, micropolitics and resistance: A new materialist analysis

Personal health technologies (PHTs) are near-body devices or applications designed for use by a single individual, principally outside healthcare facilities. They enable users to monitor physiological processes or body activity, are frequently communication-enabled, and sometimes also intervene therapeutically. This paper explores a range of PHTs, from blood pressure or blood glucose monitors purchased in pharmacies, fitness monitors such as FitBit and Nike+ Fuelband, through to drug pumps and implantable medical devices. It applies a new materialist analysis, first reverse engineering a range of PHTs to explore their micropolitics, and then forward-engineering PHTs to meet, variously, public health, corporate, patient and resisting-citizen agendas. The paper concludes with a critical discussion of PHTs, and the possibilities of designing devices and apps that might foster a subversive micropolitics and encourage collective and resisting ‘citizen-health’

Design and application of nanoscale actuators using block-copolymers

Block copolymers are versatile designer macromolecules where a “bottom-up” approach can be used to create tailored materials with unique properties. These simple building blocks allow us to create actuators that convert energy from a variety of sources (such as chemical, electrical and heat) into mechanical energy. In this review we will discuss the advantages and potential pitfalls of using block copolymers to create actuators, putting emphasis on the ways in which these materials can be synthesised and processed. Particular attention will be given to the theoretical background of microphase separation and how the phase diagram can be used during the design process of actuators. Different types of actuation will be discussed throughout

Fate of rising methane bubbles in stratified waters: How much methane reaches the atmosphere?

There is growing concern about the transfer of methane originating from water bodies to the atmosphere. Methane from sediments can reach the atmosphere directly via bubbles or indirectly via vertical turbulent transport. This work quantifies methane gas bubble dissolution using a combination of bubble modeling and acoustic observations of rising bubbles to determine what fraction of the methane transported by bubbles will reach the atmosphere. The bubble model predicts the evolving bubble size, gas composition, and rise distance and is suitable for almost all aquatic environments. The model was validated using methane and argon bubble dissolution measurements obtained from the literature for deep, oxic, saline water with excellent results. Methane bubbles from within the hydrate stability zone (typically below ∼500 m water depth in the ocean) are believed to form an outer hydrate rim. To explain the subsequent slow dissolution, a model calibration was performed using bubble dissolution data from the literature measured within the hydrate stability zone. The calibrated model explains the impressively tall flares (>1300 m) observed in the hydrate stability zone of the Black Sea. This study suggests that only a small amount of methane reaches the surface at active seep sites in the Black Sea, and this only from very shallow water areas (<100 m). Clearly, the Black Sea and the ocean are rather effective barriers against the transfer of bubble methane to the atmosphere, although substantial amounts of methane may reach the surface in shallow lakes and reservoirs

The effector T cell response to influenza infection

Influenza virus infection induces a potent initial innate immune response, which serves to limit the extent of viral replication and virus spread. However, efficient (and eventual) viral clearance within the respiratory tract requires the subsequent activation, rapid proliferation, recruitment, and expression of effector activities by the adaptive immune system, consisting of antibody producing B cells and influenza-specific T lymphocytes with diverse functions. The ensuing effector activities of these T lymphocytes ultimately determine (along with antibodies) the capacity of the host to eliminate the viruses and the extent of tissue damage. In this review, we describe this effector T cell response to influenza virus infection. Based on information largely obtained in experimental settings (i.e., murine models), we will illustrate the factors regulating the induction of adaptive immune T cell responses to influenza, the effector activities displayed by these activated T cells, the mechanisms underlying the expression of these effector mechanisms, and the control of the activation/differentiation of these T cells, in situ, in the infected lungs

High Speed CPU Simulation using LTU Dynamic Binary Translation

International audienceIn order to increase the speed of dynamic binary translation based simulators we consider the translation of large translation units consisting of multiple blocks. In contrast to other simulators, which translate hot blocks or pages, the techniques presented in this paper profile the target program's execution path at runtime. The identification of hot paths ensures that only executed code is translated whilst at the same time offering greater scope for optimization. Mean performance figures for the functional simulation of EEMBC benchmarks show the new simulation techniques to be at least 63% faster than basic block based dynamic binary translation

Diels–Alder cycloaddition and RAFT chain end functionality::an elegant route to fullerene end-capped polymers with control over molecular mass and architecture

Fullerene C60 functionalised polymers (FFPs) have found numerous applications from photovoltaic devices to materials for photodynamic therapy. Polymer end-capping is one way to fabricate FFPs since it provides enhanced control over the macromolecular architecture and composition. This paper reports, for the first time, a facile, metal catalyst-free approach to FFPs where polymers, generated by reversible-addition fragmentation chain transfer (RAFT) polymerisation, were coupled to a fullerene derivative through chain-end functionality, provided by the chain transfer agent without further modification. Two routes to a fullerene derivative were compared – based on the Prato reaction and Diels–Alder cycloaddition. The Diels–Alder route exclusively yielded the mono-addition product, whereas the Prato route resulted in a mixture of mono- and diadducts which required further separation. This elegant combination of well-defined RAFT polymerisation and precise Diels–Alder addition allowed one to obtain fullerene end-capped polymers within a wide range of molecular masses (from 5000 to 50 000 g mol−1)