Mathematical Modelling of Chemical Diffusion through Skin using Grid-based PSEs

A Problem Solving Environment (PSE) with connections to remote distributed Grid processes is developed. The Grid simulation is itself a parallel process and allows steering of individual or multiple runs of the core computation of chemical diffusion through the stratum corneum, the outer layer of the skin. The effectiveness of this Grid-based approach in improving the quality of the simulation is assessed

Optimal Counter-current exchange networks

We present a general analysis of exchange devices linking their efficiency to the geometry of the exchange surface and supply network. For certain parameter ranges, we show that the optimal exchanger consists of densely packed pipes which can span a thin sheet of large area (an “active layer”), which may be crumpled into a fractal surface and supplied with a fractal network of pipes. We derive the efficiencies of such exchangers, showing the potential for significant gains compared to regular exchangers (where the active layer is flat), using parameters relevant to biological systems

Green tea improves metabolic biomarkers, not weight or body composition: a pilot study in overweight breast cancer survivors

Abstract Background: Overweight status after breast cancer treatment may increase a woman's risk for recurrent disease and/or early onset cardiovascular disease. Green tea has been proposed to promote weight loss and favourably modify glucose, insulin and blood lipids. This pilot study tested the effect of daily decaffeinated green tea consumption for 6 months on weight and body composition, select metabolic parameters and lipid profiles in overweight breast cancer survivors. Methods: The effect of daily decaffeinated green tea intake on weight, body composition and changes in resting metabolic rate, energy intake, glucose, insulin, homeostasis model assessment -insulin resistance (HOMA-IR) and lipids was evaluated in overweight breast cancer survivors. Participants had a mean weight of 80.2 kg; body mass index (BMI) 30.1 kg m )2 ; and body fat 46.4%. Participants (n = 54) were randomised to 960 mL of decaffeinated green or placebo tea daily for 6 months. Results: Mean (SD) tea intake among study completers (n = 39) was 5952 (1176) mL week )1 and was associated with a significant reduction in energy intake (P = 0.02). Change in body weight of )1.2 kg (green tea) versus +0.2 kg (placebo) suggests a weight change effect, although this was not statistically significant. Decaffeinated green tea intake was associated with elevated high-density lipoprotein (HDL) levels (P = 0.003) and nonsignificant improvements in the HDL/LDL ratio and HOMA-IR ()1.1 ± 5.9: green tea; +3.2 ± 7.2: herbal). Conclusions: Intake of decaffeinated green tea for 6 months was associated with a slight reduction in body weight and improved HDL and glucose homeostasis in overweight breast cancer survivors

Characteristics of Copper-based Oxygen Carriers Supported on Calcium Aluminates for Chemical-Looping Combustion with Oxygen Uncoupling (CLOU)

Eight different oxygen carriers (OC) containing CuO (60 wt %) and different mass ratios of CaO to Al2O3 as the support were synthesized by wet-mixing followed by calcination at 1000 °C. The method of synthesis used involved the formation of calcium aluminum hydrate phases and ensured homogeneous mixing of the Ca2+ and Al3+ ions in the support at the molecular level. The performance of the OCs for up to 100 cycles of reduction and oxidation was evaluated in both a thermogravimetric analyzer (TGA) and a fluidized bed reactor, covering a temperature range of 800 to 950 °C. In these cycling experiments, complete conversion of the OC, from CuO to Cu and vice versa, was always achieved for all OCs. The reactivity of the materials was so high that no deactivation could be observed in the TGA, owing to mass transfer limitations. It was found that OCs prepared with a mass ratio of CaO to Al2O3 in the support >0.55 agglomerated in the fluidized bed, resulting in an apparent deactivation over 25 cycles for all temperatures investigated. High ratios of mass of CaO to Al2O3 in the support resulted in CuO interacting with CaO, forming mixed oxides that have low melting temperatures, and this explains the tendency of these materials to agglomerate. This behavior was not observed when the mass ratio of CaO to Al2O3 in the support was ≤0.55 and such materials showed excellent cyclic stability operating under redox conditions at temperatures as high as 950 °C.The authors thank Mohammad Ismail and Matthew Dunstan for helping with the XRD analysis and Alex Casabuena-Rodriguez and for helping with the SEM. This work was supported by the Engineering and Physical Sciences Research Council (EPSRC grant EP/I010912/1).This is the final version of the article. It first appeared from ACS via http://dx.doi.org/10.1021/acs.iecr.5b0117

Carbon release from submarine seeps at the Costa Rica fore arc: implications for the volatile cycle at the Central America convergent margin

We report total dissolved inorganic carbon (DIC) abundances and isotope ratios, as well as helium isotope ratios (3He/4He), of cold seep fluids sampled at the Costa Rica fore arc in order to evaluate the extent of carbon loss from the submarine segment of the Central America convergent margin. Seep fluids were collected over a 12 month period at Mound 11, Mound 12, and Jaco Scar using copper tubing attached to submarine flux meters operating in continuous pumping mode. The fluids show minimum 3He/4He ratios of 1.3 RA (where RA is air 3He/4He), consistent with a small but discernable contribution of mantle-derived helium. At Mound 11, δ13C∑CO2 values between −23.9‰ and −11.6‰ indicate that DIC is predominantly derived from deep methanogenesis and is carried to the surface by fluids derived from sediments of the subducting slab. In contrast, at Mound 12, most of the ascending dissolved methane is oxidized due to lower flow rates, giving extremely low δ13C∑CO2 values ranging from −68.2‰ to −60.3‰. We estimate that the carbon flux (CO2 plus methane) through submarine fluid venting at the outer fore arc is 8.0 × 105 g C km−1 yr−1, which is virtually negligible compared to the total sedimentary carbon input to the margin and the output at the volcanic front. Unless there is a significant but hitherto unidentified carbon flux at the inner fore arc, the implication is that most of the carbon being subducted in Costa Rica must be transferred to the (deeper) mantle, i.e., beyond the depth of arc magma generation

Designing Bioactive Delivery Systems for Tissue Regeneration

The direct infusion of macromolecules into defect sites generally does not impart adequate physiological responses. Without the protection of delivery systems, inductive molecules may likely redistribute away from their desired locale and are vulnerable to degradation. In order to achieve efficacy, large doses supplied at interval time periods are necessary, often at great expense and ensuing detrimental side effects. The selection of a delivery system plays an important role in the rate of re-growth and functionality of regenerating tissue: not only do the release kinetics of inductive molecules and their consequent bioactivities need to be considered, but also how the delivery system interacts and integrates with its surrounding host environment. In the current review, we describe the means of release of macromolecules from hydrogels, polymeric microspheres, and porous scaffolds along with the selection and utilization of bioactive delivery systems in a variety of tissue-engineering strategies

Understanding mechanisms of asphaltene adsorption from organic solvent on mica

The adsorption process of asphaltene onto molecularly smooth mica surfaces from toluene solutions of various concentrations (0.01-1 wt %) was studied using a surface forces apparatus (SFA). Adsorption of asphaltenes onto mica was found to be highly dependent on adsorption time and asphaltene concentration of the solution. The adsorption of asphaltenes led to an attractive bridging force between the mica surfaces in asphaltene solution. The adsorption process was identified as being controlled by the diffusion of asphaltenes from the bulk solution to the mica surface with a diffusion coefficient on the order of 10-10 m2/s at room temperature, depending on the asphaltene bulk concentration. This diffusion coefficient corresponds to a hydrodynamic molecular radius of approximately 0.5 nm, indicating that asphaltene diffuses to mica surfaces as individual molecules at very low concentration (e.g., 0.01 wt %). Atomic force microscopy images of the adsorbed asphaltenes on mica support the results of the SFA force measurements. The results from the SFA force measurements provide valuable insights into the molecular interactions (e.g., steric repulsion and bridging attraction as a function of distance) of asphaltenes in organic media and hence their roles in crude oil and bitumen production

Impact of Sarcoplasmic Reticulum Calcium Release on Calcium Dynamics and Action Potential Morphology in Human Atrial Myocytes: A Computational Study

Electrophysiological studies of the human heart face the fundamental challenge that experimental data can be acquired only from patients with underlying heart disease. Regarding human atria, there exist sizable gaps in the understanding of the functional role of cellular Ca2+ dynamics, which differ crucially from that of ventricular cells, in the modulation of excitation-contraction coupling. Accordingly, the objective of this study was to develop a mathematical model of the human atrial myocyte that, in addition to the sarcolemmal (SL) ion currents, accounts for the heterogeneity of intracellular Ca2+ dynamics emerging from a structurally detailed sarcoplasmic reticulum (SR). Based on the simulation results, our model convincingly reproduces the principal characteristics of Ca2+ dynamics: 1) the biphasic increment during the upstroke of the Ca2+ transient resulting from the delay between the peripheral and central SR Ca2+ release, and 2) the relative contribution of SL Ca2+ current and SR Ca2+ release to the Ca2+ transient. In line with experimental findings, the model also replicates the strong impact of intracellular Ca2+ dynamics on the shape of the action potential. The simulation results suggest that the peripheral SR Ca2+ release sites define the interface between Ca2+ and AP, whereas the central release sites are important for the fire-diffuse-fire propagation of Ca2+ diffusion. Furthermore, our analysis predicts that the modulation of the action potential duration due to increasing heart rate is largely mediated by changes in the intracellular Na+ concentration. Finally, the results indicate that the SR Ca2+ release is a strong modulator of AP duration and, consequently, myocyte refractoriness/excitability. We conclude that the developed model is robust and reproduces many fundamental aspects of the tight coupling between SL ion currents and intracellular Ca2+ signaling. Thus, the model provides a useful framework for future studies of excitation-contraction coupling in human atrial myocytes