Enhanced Photostability and Photoactivity of Ruthenium Polypyridyl-Based Photocatalysts by Covalently Anchoring Onto Reduced Graphene Oxide

\ua9 2024 The Authors. Published by American Chemical Society. Recent studies toward finding more efficient ruthenium metalloligands for photocatalysis applications have shown that the derivatives of the linear [Ru(dqp)2]2+ (dqp: 2,6-di(quinolin-8-yl)-pyridine) complexes hold significant promise due to their extended emission lifetime in the μs time scale while retaining comparable redox potential, extinction coefficients, and absorption profile in the visible region to [Ru(bpy)3]2+ (bpy: 2,2′-bipyridine) and [Ru(tpy)2]2+ (tpy: 2,2′:6′,2″-terpyridine) complexes. Nevertheless, its photostability in aqueous solution needs to be improved for its widespread use in photocatalysis. Carbon-based supports have arisen as potential solutions for improving photostability and photocatalytic activity, yet their effect greatly depends on the interaction of the metal complex with the support. Herein, we present a strategy for obtaining Ru-polypyridyl complexes covalently linked to aminated reduced graphene oxide (rGO) to generate novel materials with long-term photostability and increased photoactivity. Specifically, the hybrid Ru(dqp)@rGO system has shown excellent photostable behavior during 24 h of continual irradiation, with an enhancement of 10 and 15% of photocatalytic dye degradation in comparison with [Ru(dqp)2]2+ and Ru(tpy)@rGO, respectively, as well as remarkable recyclability. The presented strategy corroborates the potential of [Ru(dqp)2]2+ as an interesting photoactive molecule to produce more advantageous light-active materials by covalent attachment onto carbon-based supports

Self-Assembly of Atomically Thin Chiral Copper Heterostructures Templated by Black Phosphorus

The fabrication of 2D systems for electronic devices is not straightforward, with top‐down low‐yield methods often employed leading to irregular nanostructures and lower quality devices. Here, a simple and reproducible method to trigger self‐assembly of arrays of high aspect‐ratio chiral copper heterostructures templated by the structural anisotropy in black phosphorus (BP) nanosheets is presented. Using quantitative atomic resolution aberration‐corrected scanning transmission electron microscopy imaging, in situ heating transmission electron microscopy and electron energy‐loss spectroscopy arrays of heterostructures forming at speeds exceeding 100 nm s−1 and displaying long‐range order over micrometers are observed. The controlled instigation of the self‐assembly of the Cu heterostructures embedded in BP is achieved using conventional electron beam lithography combined with site specific placement of Cu nanoparticles. Density functional theory calculations are used to investigate the atomic structure and suggest a metallic nature of the Cu heterostructures grown in BP. The findings of this new hybrid material with unique dimensionality, chirality, and metallic nature and its triggered self‐assembly open new and exciting opportunities for next generation, self‐assembling devices

Materials and Molecular Modelling at the Exascale

Progression of computational resources towards exascale computing makes possible simulations of unprecedented accuracy and complexity in the fields of materials and molecular modelling (MMM), allowing high fidelity in silico experiments on complex materials of real technological interest. However, this presents demanding challenges for the software used, especially the exploitation of the huge degree of parallelism available on exascale hardware, and the associated problems of developing effective workflows and data management on such platforms. As part of the UKs ExCALIBUR exascale computing initiative, the UK-led MMM Design and Development Working Group has worked with the broad MMM community to identify a set of high priority application case studies which will drive future exascale software developments. We present an overview of these case studies, categorized by the methodological challenges which will be required to realize them on exascale platforms, and discuss the exascale requirements, software challenges and impact of each application area

Intraperitoneal drain placement and outcomes after elective colorectal surgery: international matched, prospective, cohort study

Despite current guidelines, intraperitoneal drain placement after elective colorectal surgery remains widespread. Drains were not associated with earlier detection of intraperitoneal collections, but were associated with prolonged hospital stay and increased risk of surgical-site infections.Background Many surgeons routinely place intraperitoneal drains after elective colorectal surgery. However, enhanced recovery after surgery guidelines recommend against their routine use owing to a lack of clear clinical benefit. This study aimed to describe international variation in intraperitoneal drain placement and the safety of this practice. Methods COMPASS (COMPlicAted intra-abdominal collectionS after colorectal Surgery) was a prospective, international, cohort study which enrolled consecutive adults undergoing elective colorectal surgery (February to March 2020). The primary outcome was the rate of intraperitoneal drain placement. Secondary outcomes included: rate and time to diagnosis of postoperative intraperitoneal collections; rate of surgical site infections (SSIs); time to discharge; and 30-day major postoperative complications (Clavien-Dindo grade at least III). After propensity score matching, multivariable logistic regression and Cox proportional hazards regression were used to estimate the independent association of the secondary outcomes with drain placement. Results Overall, 1805 patients from 22 countries were included (798 women, 44.2 per cent; median age 67.0 years). The drain insertion rate was 51.9 per cent (937 patients). After matching, drains were not associated with reduced rates (odds ratio (OR) 1.33, 95 per cent c.i. 0.79 to 2.23; P = 0.287) or earlier detection (hazard ratio (HR) 0.87, 0.33 to 2.31; P = 0.780) of collections. Although not associated with worse major postoperative complications (OR 1.09, 0.68 to 1.75; P = 0.709), drains were associated with delayed hospital discharge (HR 0.58, 0.52 to 0.66; P < 0.001) and an increased risk of SSIs (OR 2.47, 1.50 to 4.05; P < 0.001). Conclusion Intraperitoneal drain placement after elective colorectal surgery is not associated with earlier detection of postoperative collections, but prolongs hospital stay and increases SSI risk

Uncoupled activation and cyclization in catmint reductive terpenoid biosynthesis

Terpene synthases typically form complex molecular scaffolds by concerted activation and cyclization of linear starting materials in a single enzyme active site. Here we show that iridoid synthase, an atypical reductive terpene synthase, catalyzes the activation of its substrate 8-oxogeranial into a reactive enol intermediate, but does not catalyze the subsequent cyclization into nepetalactol. This discovery led us to identify a class of nepetalactol-related short-chain dehydrogenase enzymes (NEPS) from catmint (Nepeta mussinii) that capture this reactive intermediate and catalyze the stereoselective cyclisation into distinct nepetalactol stereoisomers. Subsequent oxidation of nepetalactols by NEPS1 provides nepetalactones, metabolites that are well known for both insect-repellent activity and euphoric effect in cats. Structural characterization of the NEPS3 cyclase reveals that it binds to NAD+ yet does not utilize it chemically for a non-oxidoreductive formal [4 + 2] cyclization. These discoveries will complement metabolic reconstructions of iridoid and monoterpene indole alkaloid biosynthesis

Evaluation of appendicitis risk prediction models in adults with suspected appendicitis

Background Appendicitis is the most common general surgical emergency worldwide, but its diagnosis remains challenging. The aim of this study was to determine whether existing risk prediction models can reliably identify patients presenting to hospital in the UK with acute right iliac fossa (RIF) pain who are at low risk of appendicitis. Methods A systematic search was completed to identify all existing appendicitis risk prediction models. Models were validated using UK data from an international prospective cohort study that captured consecutive patients aged 16–45 years presenting to hospital with acute RIF in March to June 2017. The main outcome was best achievable model specificity (proportion of patients who did not have appendicitis correctly classified as low risk) whilst maintaining a failure rate below 5 per cent (proportion of patients identified as low risk who actually had appendicitis). Results Some 5345 patients across 154 UK hospitals were identified, of which two‐thirds (3613 of 5345, 67·6 per cent) were women. Women were more than twice as likely to undergo surgery with removal of a histologically normal appendix (272 of 964, 28·2 per cent) than men (120 of 993, 12·1 per cent) (relative risk 2·33, 95 per cent c.i. 1·92 to 2·84; P < 0·001). Of 15 validated risk prediction models, the Adult Appendicitis Score performed best (cut‐off score 8 or less, specificity 63·1 per cent, failure rate 3·7 per cent). The Appendicitis Inflammatory Response Score performed best for men (cut‐off score 2 or less, specificity 24·7 per cent, failure rate 2·4 per cent). Conclusion Women in the UK had a disproportionate risk of admission without surgical intervention and had high rates of normal appendicectomy. Risk prediction models to support shared decision‐making by identifying adults in the UK at low risk of appendicitis were identified

The influence of surface Fe on the corrosion of Mg

Iron is a common impurity in magnesium alloys, and is acknowledged to accelerate Mg corrosion, contributing to Mg’s poor corrosion resistance. However, an atomistic understanding of this acceleration effect is still incomplete. Here we use Density Functional Theory simulations performed with the Quantum Espresso package to investigate several Fe/Mg models, calculating the associated work functions, atomic charges, and H and Fe absorption energies. Compared with a pure Mg slab, we find that Fe’s existence increases the work function and decreases the H adsorption energy. Furthermore, a general trend is observed that the Fe absorption energy decreases with increasing interaction between Fe atoms on the Mg substrate. Based on these results, a mechanism based on charge redistribution is put forward to explain how Fe accelerates the corrosion of Mg. Our findings provide insight into Mg’s corrosion process at the atomic level that might inform future measures to prevent corrosion

Nutritional challenges and countermeasures for space travel

There has been a reinvigoration of public interest in space exploration in what has been deemed the new space race, which aims to eventually take humans to Mars in the 2030s. This type of Earth-independent deep space mission presents a multitude of challenges for providing astronauts with adequate nutrition, which are not currently posed by our presence in low earth orbit. For example, there are technical challenges associated with providing enough food with sufficient nutrient content, bioavailability and increased shelf life. Environmental stressors may also impact physiology and in turn affect nutritional status. Increased exposure of radiation, for example, causes changes in the gut and liver that might facilitate nutrient deficiency. Current or potential countermeasures for these challenges are explored including the use of bio-regenerative systems such as growing crops or biomass, or inducing torpor to reduce nutritional needs. Additionally, the beneficial role of nutrients has also been explored for alleviating the harmful effects of spaceflight exposure. It is clear that such countermeasures will be necessary to maintain astronaut health during long-duration missions to potentially counteract physiological stresses and to allow us to continue pushing the boundaries of space exploration.<br/

An in situ and ex situ TEM study into the oxidation of titanium (IV) sulphide

Titanium (IV) sulphide (TiS2) is a layered transition metal dichalcogenide, which we exfoliate using liquid phase exfoliation. TiS2 is a candidate for being part of a range of future technologies. These applications are varied, and include supercapacitor and battery energy storage devices, catalytic substrates and the splitting of water. The driving force behind our interest was as a material for energy storage devices. Here we investigate a potential failure mechanism for such devices, namely oxidation and subsequent loss of sulphur. This degradation is important to understand, since these applications are highly property-dependent, and changes to the chemistry will result in changes in desired properties. Two approaches to study oxidisation were taken: ex situ oxidation by water and oxygen at room temperature and in situ oxidation by a 5% O2/Ar gas at elevated temperatures. Both sources of oxygen resulted in oxidation of the starting TiS2 flakes, with differing morphologies. Water produced amorphous oxide slowly growing in from the edge of the flakes. Oxygen gas at ≥375 °C produced crystalline oxide, with a range of structures due to oxidation initiating from various regions of the observed flakes