The effect of phytosphingosine isolated from Asterina pectinifera on cell damage induced by mite antigen in HaCaT cell and antibacterial activity against Staphylococcus aureus

The current study was to investigate the positive protective effects of phytosphingosine (PS) against mite antigen and Staphylococcus aureus, etiological causes of an atopic dermatitis. To achieve this aim, PS was isolated from starfish, Asterina pectinifera, using high-performance liquid chromatography and was elucidated with nuclear magnetic resonance spectrometry. In the present experiment, PS, which ranged from 1 to 5 µM could protect the HaCaT cell against injuries caused by stimulation to 10 µg/ml mite antigen for 1 h, followed by incubation with serum-free medium for 24 h, which resembled the excitotoxin in vivo system. Furthermore, PS which was isolated from starfish could significantly inhibit the growth of S. aureus. In conclusion, this study demonstrated the protective effect of PS on excitotoxic damage against mite antigen and S. aureus through suppressing the excessive disruption of differentiation and exhibiting antibacterial capacity. This result implicated that the application of PS isolated from starfish might be a promising therapeutic option of atopic dermatitis

Hopping Conduction in Disordered Carbon Nanotubes

We report electrical transport measurements on individual disordered carbon nanotubes, grown catalytically in a nanoporous anodic aluminum oxide template. In both as-grown and annealed types of nanotubes, the low-field conductance shows as exp[-(T_{0}/T)^{1/2}] dependence on temperature T, suggesting that hopping conduction is the dominant transport mechanism, albeit with different disorder-related coefficients T_{0}. The field dependence of low-temperature conductance behaves an exp[-(xi_{0}/xi)^{1/2}] with high electric field xi at sufficiently low T. Finally, both annealed and unannealed nanotubes exhibit weak positive magnetoresistance at low T = 1.7 K. Comparison with theory indicates that our data are best explained by Coulomb-gap variable range hopping conduction and permits the extraction of disorder-dependent localization length and dielectric constant.Comment: 10 pages, 5 figure

Influence of prohexadione-calcium, trinexapac-ethyl and hexaconazole on lodging characteristic and gibberellin biosynthesis of rice (Oryza sativa L.)

We investigated the influence of prohexadione-calcium (Pro-Ca), trinexapac-ethyl (TNE) and hexaconazole (HX) on lodging and gibberellin (GA) biosynthesis pathway of rice cultivar, Hwayeongbyeo. It was observed that these novel synthetic growth retardants suppressed lodging of rice under field conditions through blocking GA biosynthesis pathway. These growth retarding chemicals were applied at basic (20 uM) and elevated (40 uM) rates either 10 days before heading (10 DBH) or 5 days before heading (5 DBH). We found that Pro-Ca, TNE and their combined application (Pro-Ca + TNE) were most effective in decreasing rice length and lodging index, when applied at 10 DBH. Similarly, the endogenous bioactive GA1 contents of rice significantly declined with application of Pro-Ca, TNE and Pro-Ca + TNE, while they were less effected by basic and elevated rates of HX as compared to the control. The growth retardants were more effective in decreasing rice lodging and blocking GA biosynthesis when applied in elevated rates. The levels of the endogenous gibberellins in rice shoots were measured by GC/MS-SIM using 2H2-labeled gibberellins as internal standards. Effect of these synthetic chemicals on growth and GA inhibition were stronger initially but eroded rapidly under field conditions. It was thus concluded that Pro-Ca and TNE were most effective in reducing plant length and suppressing lodging of rice crop under field conditions, where lodging is a major constraint to higher productivity.Key words: Growth retardants, plant growth, gibberellin biosynthesis, lodging index, rice

Improvement of Carbon Nanofibers/ZrO2 Composites Properties with a Zirconia Nanocoating on Carbon Nanofibers by Sol–Gel Method

The development of new carbon nanofibers (CNFs)–ceramic nanocomposite materials with excellent mechanical, thermal, and electrical properties is interesting for a wide range of industrial applications. Among the ceramic materials, zirconia stands out for their excellent mechanical properties. The main limitations in the preparation of this kind of nanocomposites are related with the difficulty in obtaining materials with homogeneous distribution of both phases and the dissimilar properties of CNFs and ZrO2 which causes poor interaction between them. CNFs-reinforced zirconia nanocomposites ZrO2/xCNFs (x=1–20 vol%) were prepared by powder mixture and sintered by spark plasma sintering (SPS). ZrO2-reinforced CNFs nanocomposites CNFs/xZrO2 (x=20 vol%) were prepared by powder mixture and a surface coating of CNFs by the wet chemical route with zirconia precursor is proposed as a very effective way to improve the interaction between CNFs and ZrO2. After SPS sintering, an improvement of 50% in fracture strength was found for similar nanocomposite compositions when the surface coating was used. The improved mechanical properties of these nanocomposites are caused by stronger interaction between the CNFs and ZrO2.This work was financially supported by National Plan Projects MAT2006-01783 and MAT2007-30989-E and the Regional Project FICYT PC07-021. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her research grant BES2007-15033.Borrell Tomás, MA.; Rocha, VG.; Torrecillas, R.; Fernandez, A. (2011). Improvement of Carbon Nanofibers/ZrO2 Composites Properties with a Zirconia Nanocoating on Carbon Nanofibers by Sol–Gel Method. Journal of the American Ceramic Society. 94(7):2048-2052. https://doi.org/10.1111/j.1551-2916.2010.04354.xS20482052947Iijima, S. (1991). Helical microtubules of graphitic carbon. Nature, 354(6348), 56-58. doi:10.1038/354056a0Merkoçi, A. (2005). Carbon Nanotubes in Analytical Sciences. Microchimica Acta, 152(3-4), 157-174. doi:10.1007/s00604-005-0439-zUchida, T., Anderson, D. P., Minus, M. L., & Kumar, S. (2006). Morphology and modulus of vapor grown carbon nano fibers. Journal of Materials Science, 41(18), 5851-5856. doi:10.1007/s10853-006-0324-0Hvizdoš, P., Puchý, V., Duszová, A., & Dusza, J. (2010). Tribological behavior of carbon nanofiber–zirconia composite. Scripta Materialia, 63(2), 254-257. doi:10.1016/j.scriptamat.2010.03.069Balázsi, C., Kónya, Z., Wéber, F., Biró, L. P., & Arató, P. (2003). Preparation and characterization of carbon nanotube reinforced silicon nitride composites. Materials Science and Engineering: C, 23(6-8), 1133-1137. doi:10.1016/j.msec.2003.09.085Tatami, J., Katashima, T., Komeya, K., Meguro, T., & Wakihara, T. (2005). Electrically Conductive CNT-Dispersed Silicon Nitride Ceramics. Journal of the American Ceramic Society, 88(10), 2889-2893. doi:10.1111/j.1551-2916.2005.00539.xHirota, K., Hara, H., & Kato, M. (2007). Mechanical properties of simultaneously synthesized and consolidated carbon nanofiber (CNF)-dispersed SiC composites by pulsed electric-current pressure sintering. Materials Science and Engineering: A, 458(1-2), 216-225. doi:10.1016/j.msea.2006.12.065Dusza, J., Blugan, G., Morgiel, J., Kuebler, J., Inam, F., Peijs, T., … Puchy, V. (2009). Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of the European Ceramic Society, 29(15), 3177-3184. doi:10.1016/j.jeurceramsoc.2009.05.030Lee, S.-Y., Kim, H., McIntyre, P. C., Saraswat, K. C., & Byun, J.-S. (2003). Atomic layer deposition of ZrO2 on W for metal–insulator–metal capacitor application. Applied Physics Letters, 82(17), 2874-2876. doi:10.1063/1.1569985Kobayashi, S., & Kawai, W. (2007). Development of carbon nanofiber reinforced hydroxyapatite with enhanced mechanical properties. Composites Part A: Applied Science and Manufacturing, 38(1), 114-123. doi:10.1016/j.compositesa.2006.01.006Sun, J., Gao, L., Iwasa, M., Nakayama, T., & Niihara, K. (2005). Failure investigation of carbon nanotube/3Y-TZP nanocomposites. Ceramics International, 31(8), 1131-1134. doi:10.1016/j.ceramint.2004.11.010Ukai, T., Sekino, T., Hirvonen, A. T., Tanaka, N., Kusunose, T., Nakayama, T., & Niihara, K. (2006). Preparation and Electrical Properties of Carbon Nanotubes Dispersed Zirconia Nanocomposites. Key Engineering Materials, 317-318, 661-664. doi:10.4028/www.scientific.net/kem.317-318.661Duszová, A., Dusza, J., Tomášek, K., Morgiel, J., Blugan, G., & Kuebler, J. (2008). Zirconia/carbon nanofiber composite. Scripta Materialia, 58(6), 520-523. doi:10.1016/j.scriptamat.2007.11.002Wang, X., Padture, N. P., & Tanaka, H. (2004). Contact-damage-resistant ceramic/single-wall carbon nanotubes and ceramic/graphite composites. Nature Materials, 3(8), 539-544. doi:10.1038/nmat1161Zhan, G.-D., Kuntz, J. D., Garay, J. E., & Mukherjee, A. K. (2003). Electrical properties of nanoceramics reinforced with ropes of single-walled carbon nanotubes. Applied Physics Letters, 83(6), 1228-1230. doi:10.1063/1.1600511Yucheng, W., & Zhengyi, F. (2002). Study of temperature field in spark plasma sintering. Materials Science and Engineering: B, 90(1-2), 34-37. doi:10.1016/s0921-5107(01)00780-2Haase, F., & Sauer, J. (1998). The Surface Structure of Sulfated Zirconia:  Periodic ab Initio Study of Sulfuric Acid Adsorbed on ZrO2(101) and ZrO2(001). Journal of the American Chemical Society, 120(51), 13503-13512. doi:10.1021/ja9825534Matsui, K., Suzuki, H., Ohgai, M., & Arashi, H. (1995). Raman Spectroscopic Studies on the Formation Mechanism of Hydrous-Zirconia Fine Particles. Journal of the American Ceramic Society, 78(1), 146-152. doi:10.1111/j.1151-2916.1995.tb08374.xGateshki, M., Petkov, V., Williams, G., Pradhan, S. K., & Ren, Y. (2005). Atomic-scale structure of nanocrystallineZrO2prepared by high-energy ball milling. Physical Review B, 71(22). doi:10.1103/physrevb.71.224107Pyda, W., Haberko, K., & Bulko, M. M. (1991). Hydrothermal Crystallization of Zirconia and Zirconia Solid Solutions. Journal of the American Ceramic Society, 74(10), 2622-2629. doi:10.1111/j.1151-2916.1991.tb06810.xDell’Agli, G., & Mascolo, G. (2000). Hydrothermal synthesis of ZrO2–Y2O3 solid solutions at low temperature. Journal of the European Ceramic Society, 20(2), 139-145. doi:10.1016/s0955-2219(99)00151-xTai, C. Y., Hsiao, B.-Y., & Chiu, H.-Y. (2007). Preparation of silazane grafted yttria-stabilized zirconia nanocrystals via water/CTAB/hexanol reverse microemulsion. Materials Letters, 61(3), 834-836. doi:10.1016/j.matlet.2006.05.068Tai, C. Y., Lee, M.-H., & Wu, Y.-C. (2001). Control of zirconia particle size by using two-emulsion precipitation technique. Chemical Engineering Science, 56(7), 2389-2398. doi:10.1016/s0009-2509(00)00454-1Tai, C. Y., & Hsiao, B.-Y. (2005). CHARACTERIZATION OF ZIRCONIA POWDER SYNTHESIZED VIA REVERSE MICROEMULSION PRECIPITATION. Chemical Engineering Communications, 192(11), 1525-1540. doi:10.1080/009864490896133Ci, L., Wei, J., Wei, B., Liang, J., Xu, C., & Wu, D. (2001). Carbon nanofibers and single-walled carbon nanotubes prepared by the floating catalyst method. Carbon, 39(3), 329-335. doi:10.1016/s0008-6223(00)00126-3Choi, S. R., & Bansal, N. P. (s. f.). Alumina-Reinforced Zirconia Composites. Handbook of Ceramic Composites, 437-457. doi:10.1007/0-387-23986-3_18Li, W., & Gao, L. (2000). Rapid sintering of nanocrystalline ZrO2(3Y) by spark plasma sintering. Journal of the European Ceramic Society, 20(14-15), 2441-2445. doi:10.1016/s0955-2219(00)00152-7Borrell, A., Fernández, A., Merino, C., & Torrecillas, R. (2010). High density carbon materials obtained at relatively low temperature by spark plasma sintering of carbon nanofibers. International Journal of Materials Research, 101(1), 112-116. doi:10.3139/146.110246Dusza, J., Morgiel, J., Tatarko, P., & Puchy, V. (2009). Characterization of interfaces in ZrO2–carbon nanofiber composite. Scripta Materialia, 61(3), 253-256. doi:10.1016/j.scriptamat.2009.03.052Lauwers, B., Kruth, J. P., Liu, W., Eeraerts, W., Schacht, B., & Bleys, P. (2004). Investigation of material removal mechanisms in EDM of composite ceramic materials. Journal of Materials Processing Technology, 149(1-3), 347-352. doi:10.1016/j.jmatprotec.2004.02.01

Wide Range Control of Microstructure and Mechanical Properties of Carbon Nanotube Forests: A Comparison Between Fixed and Floating Catalyst CVD Techniques

Vertically aligned carbon nanotube (CNT) forests may be used as miniature springs, compliant thermal interfaces, and shock absorbers, and for these and other applications it is vital to understand how to engineer their mechanical properties. Herein is investigated how the diameter and packing density within CNT forests govern their deformation behavior, structural stiffness, and elastic energy absorption properties. The mechanical behavior of low‐density CNT forests grown by fixed catalyst CVD methods and high‐density CNT forests grown by a floating catalyst CVD method are studied by in situ SEM compression testing and tribometer measurements of force‐displacement relationships. Low‐density and small‐diameter CNT columns (fixed catalyst) exhibit large plastic deformation and can be pre‐deformed to act as springs within a specified elastic range, whereas high‐density and large‐diameter CNT columns (floating catalyst) exhibit significant elastic recovery after deformation. In this work the energy absorption capacity of CNT forests is tuned over three orders of magnitude and it is shown that CNT forest density can be tuned over a range of conventional foam materials, but corresponding stiffness is ∼10× higher. It is proposed that the elastic behavior of CNT forests is analogous to open‐cell foams and a simple model is presented. It is also shown that this model can be useful as a first‐order design tool to establish design guidelines for the mechanical properties of CNT forests and selection of the appropriate synthesis method. Wide range stiffness tuning of carbon nanotube (CNT) forests over three orders of magnitude is presented by directly modifying the diameter and packing density of CNTs through the modulation of chemical vapor deposition (CVD) parameters. Fixed catalyst and floating catalyst CVD techniques exhibit significantly different deformation mechanisms and the open‐cell foam model predicts the stiffness ratio within one type of CVD method very well.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94517/1/5028_ftp.pd

Heterochromatin protein 1α mediates development and aggressiveness of neuroendocrine prostate cancer

Neuroendocrine prostate cancer (NEPC) is a lethal subtype of prostate cancer (PCa) arising mostly from adenocarcinoma via NE transdifferentiation following androgen deprivation therapy. Mechanisms contributing to both NEPC development and its aggressiveness remain elusive. In light of the fact that hyperchromatic nuclei are a distinguishing histopathological feature of NEPC, we utilized transcriptomic analyses of our patient-derived xenograft (PDX) models, multiple clinical cohorts, and genetically engineered mouse models to identify 36 heterochromatin-related genes that are significantly enriched in NEPC. Longitudinal analysis using our unique, first-in-field PDX model of adenocarcinoma-to-NEPC transdifferentiation revealed that, among those 36 heterochromatin-related genes, heterochromatin protein 1α (HP1α) expression increased early and steadily during NEPC development and remained elevated in the developed NEPC tumor. Its elevated expression was further confirmed in multiple PDX and clinical NEPC samples. HP1α knockdown in the NCI-H660 NEPC cell line inhibited proliferation, ablated colony formation, and induced apoptotic cell death, ultimately leading to tumor growth arrest. Its ectopic expression significantly promoted NE transdifferentiation in adenocarcinoma cells subjected to androgen deprivation treatment. Mechanistically, HP1α reduced expression of androgen receptor (AR) and RE1 silencing transcription factor (REST) and enriched the repressive trimethylated histone H3 at Lys9 (H3K9me3) mark on their respective gene promoters. These observations indicate a novel mechanism underlying NEPC development mediated by abnormally expressed heterochromatin genes, with HP1α as an early functional mediator and a potential therapeutic target for NEPC prevention and management

Increased S-nitrosylation and proteasomal degradation of caspase-3 during infection contribute to the persistence of adherent invasive escherichia coli (AIEC) in immune cells

Adherent invasive Escherichia coli (AIEC) have been implicated as a causative agent of Crohn's disease (CD) due to their isolation from the intestines of CD sufferers and their ability to persist in macrophages inducing granulomas. The rapid intracellular multiplication of AIEC sets it apart from other enteric pathogens such as Salmonella Typhimurium which after limited replication induce programmed cell death (PCD). Understanding the response of infected cells to the increased AIEC bacterial load and associated metabolic stress may offer insights into AIEC pathogenesis and its association with CD. Here we show that AIEC persistence within macrophages and dendritic cells is facilitated by increased proteasomal degradation of caspase-3. In addition S-nitrosylation of pro- and active forms of caspase-3, which can inhibit the enzymes activity, is increased in AIEC infected macrophages. This S-nitrosylated caspase-3 was seen to accumulate upon inhibition of the proteasome indicating an additional role for S-nitrosylation in inducing caspase-3 degradation in a manner independent of ubiquitination. In addition to the autophagic genetic defects that are linked to CD, this delay in apoptosis mediated in AIEC infected cells through increased degradation of caspase-3, may be an essential factor in its prolonged persistence in CD patients