705 research outputs found
Estimation in a growth study with irregular measurement times
Between 1982 and 1988 a growth study was carried out at the Division of Pediatric Oncology of the University Hospital of Groningen. A special feature of the project was that sample sizes are small and that ages at entry may be very different. In addition the intended design was not fully complied with. This paper highlights some aspects of the statistical analysis which is based on (1) reference scores, (2) statistical procedures allowing for an irregular pattern of measurement times caused by missing data and shifted measurement times
Mothers of children with an orofacial cleft:Satisfaction with motherhood and experience of stress
Recommended from our members
A comparative evaluation of conceptual models for the Snake River Plain aquifer at the Idaho Chemical Processing Plant, INEL
Geologic and hydrologic data collected by the United States Geological Survey (USGS) are used to evaluate the existing ground water monitoring well network completed in the upper portion of the Snake River Plain aquifer (SRPA) beneath the Idaho Chemical Processing Plant (ICPP). The USGS data analyzed and compared in this study include: (a) lithologic, geophysical, and stratigraphic information, including the conceptual geologic models intrawell, ground water flow measurement (Tracejector tests) and (c) dedicated, submersible, sampling group elevations. Qualitative evaluation of these data indicate that the upper portion of the SRPA is both heterogeneous and anisotropic at the scale of the ICPP monitoring well network. Tracejector test results indicate that the hydraulic interconnection and spatial configuration of water-producing zones is extremely complex within the upper portion of the SRPA. The majority of ICPP monitoring wells currently are equipped to sample ground water only the upper lithostratigraphic intervals of the SRPA, primarily basalt flow groups E, EF, and F. Depth-specific hydrogeochemical sampling and analysis are necessary to determine if ground water quality varies significantly between the various lithostratigraphic units adjacent to individual sampling pumps
Erratum to: Transverse dental arch relationship at 9 and 12Ā years in children with unilateral cleft lip and palate treated with infant orthopedics: a randomized clinical trial (DUTCHCLEFT)
The original version of the above article contained a mistakedue to incorrect alignment of entries in Tables 11 and 14during production. The entries are presented correctly below
Identification of Vascularised Carotid Plaques Using a Standardised and Reproducible Technique to Measure Ultrasound Contrast Uptake
ObjectivesContrast-enhanced ultrasonography (CEUS) has been used to assess the vascularisation of carotid plaques. Our aim was to develop and validate a standardised semi-automated method for CEUS examination of plaques, and test if the technique could be used to identify vulnerable plaques.MethodsStudy participants were a mixed population of symptomatic and asymptomatic subjects, selected if they had a plaque with height >2.5Ā mm and <10% acoustic shadowing. Participants received a bolus of ultrasound contrast agent and a 90-sĀ cine-loop was captured. A Contrast Quantification Program (CQP) was developed and trained to identify extent of contrast uptake after motion correction and application of a noise reduction algorithm. The technique was validated by comparing CQP values with visual assessment of contrast uptake. CQP values were also compared with plaque echogenicity and history of clinical events.ResultsCQP values correlated with a visual, 5-scale classification of contrast uptake by two blinded, experienced sonographers. Repeated contrast injections showed high reproducibility. Participants with a history of ipsilateral stroke/TIA had significantly higher CQP values than asymptomatic participants.ConclusionWe present a reproducible, semi-automatic method to identify vascularisation of carotid plaques, which could be used in prospective studies to determine the clinical value of plaque vascularisation
Global temperature calibration of the alkenone unsaturation index (UKā²37) in surface waters and comparison with surface sediments
Author Posting. Ā© American Geophysical Union, 2006. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 7 (2006): Q02005, doi:10.1029/2005GC001054.In this paper, we compile the current surface seawater C37 alkenone unsaturation (UKā²37) measurements (n=629, ā1 to 30Ā°C temperature range) to derive a global, field-based calibration of UKā²37 with alkenone production temperature. A single nonlinear āglobalā surface water calibration of UKā²37 accurately predicts alkenone production temperatures over the diversity of modern-day oceanic environments and alkenone-synthesizing populations (T=ā0.957 + 54.293(UKā²37) ā 52.894(UKā²37)2 + 28.321(UKā²37)3, r2=0.97, n=567). The mean standard error of estimation is 1.2Ā°C with insignificant bias in estimated production temperature among the different ocean regions sampled. An exception to these trends is regions characterized by strong lateral advection and extreme productivity and temperature gradients (e.g., the Brazil-Malvinas Confluence). In contrast to the surface water data, the calibration of UKā²37 in surface sediments with overlying annual mean sea surface temperature (AnnO) is best fit by a linear model (AnnO=29.876(UKā²37) ā 1.334, r2=0.97, n=592). The standard error of estimation (1.1Ā°C) is similar to that of the surface water production calibration, but a higher degree of bias is observed among the regional data sets. The sediment calibration differs significantly from the surface water calibration. UKā²37 in surface sediments is consistently higher than that predicted from AnnO and the surface water production temperature calibration, and the magnitude of the offset increases as the surface water AnnO decreases. We apply the global production temperature calibration to the coretop UKā²37 data to estimate the coretop alkenone integrated production temperature (coretop IPT) and compare this with the overlying annual mean sea surface temperature (AnnO). We use simple models to explore the possible causes of the deviation observed between the coretop temperature signal, as estimated by UKā²37, and AnnO. Our results indicate that the deviation can best be explained if seasonality in production and/or thermocline production as well as differential degradation of 37:3 and 37:2 alkenones both affect the sedimentary alkenone signal.C.R. acknowledges funding from
the Deutsche Forschungsgemeinschaft (DFG)
The role of internal transcribed spacer 2 secondary structures in classifying mycoparasitic Ampelomyces
Many fungi require specific growth conditions before they can be identified. Direct environmental DNA sequencing is advantageous, although for some taxa, specific primers need to be used for successful amplification of molecular markers. The internal transcribed spacer region is the preferred DNA barcode for fungi. However, inter- and intra-specific distances in ITS sequences highly vary among some fungal groups; consequently, it is not a solely reliable tool for species delineation. Ampelomyces, mycoparasites of the fungal phytopathogen order Erysiphales, can have ITS genetic differences up to 15%; this may lead to misidentification with other closely related unknown fungi. Indeed, Ampelomyces were initially misidentified as other pycnidial mycoparasites, but subsequent research showed that they differ in pycnidia morphology and culture characteristics. We investigated whether the ITS2 nucleotide content and secondary structure was different between Ampelomyces ITS2 sequences and those unrelated to this genus. To this end, we retrieved all ITS sequences referred to as Ampelomyces from the GenBank database. This analysis revealed that fungal ITS environmental DNA sequences are still being deposited in the database under the name Ampelomyces, but they do not belong to this genus. We also detected variations in the conserved hybridization model of the ITS2 proximal 5.8S and 28S stem from two Ampelomyces strains. Moreover, we suggested for the first time that pseudogenes form in the ITS region of this mycoparasite. A phylogenetic analysis based on ITS2 sequences-structures grouped the environmental sequences of putative Ampelomyces into a different clade from the Ampelomyces-containing clades. Indeed, when conducting ITS2 analysis, resolution of genetic distances between Ampelomyces and those putative Ampelomyces improved. Each clade represented a distinct consensus ITS2 S2, which suggested that different pre-ribosomal RNA (pre-rRNA) processes occur across different lineages. This study recommends the use of ITS2 S2s as an important tool to analyse environmental sequencing and unveiling the underlying evolutionary processes
Novel Bradykinin Analogues Modified in the N-Terminal Part of the Molecule with a Variety of Acyl Substituents
In the current work we present some pharmacological characteristics of ten new analogues of bradykinin (ArgāProāProāGlyāPheāSerāProāPheāArg) modified in the N-terminal part of the molecule with a variety of acyl substituents. Of the many acylating agents used previously with B2 receptor antagonists, the following residues were chosen: 1-adamantaneacetic acid (Aaa), 1-adamantanecarboxylic acid (Aca), 4-tert-butylbenzoic acid (t-Bba), 4-aminobenzoic acid (Aba), 12-aminododecanoic acid (Adc), succinic acid (Sua), 4-hydroxybenzoic acid, 4-hydroxy-3-methoxybenzoic acid, 3-(4-hydroxyphenyl)propionic acid and 6-hydroxy-2-naphthoic acid. Biological activity of the compounds was assessed in the in vivo rat blood pressure test and the in vitro rat uterus test. Surprisingly, N-terminal substitution of the bradykinin peptide chain itself with aforementioned groups resulted in antagonists of bradykinin in the pressor test and suppressed agonistic potency in the uterotonic test. These interesting findings need further studies as they can be helpful for designing more potent B2 receptor blockers
Recommended from our members
Integrin-mediated traction force enhances paxillin molecular associations and adhesion dynamics that increase the invasiveness of tumor cells into a three-dimensional extracellular matrix.
Metastasis requires tumor cells to navigate through a stiff stroma and squeeze through confined microenvironments. Whether tumors exploit unique biophysical properties to metastasize remains unclear. Data show that invading mammary tumor cells, when cultured in a stiffened three-dimensional extracellular matrix that recapitulates the primary tumor stroma, adopt a basal-like phenotype. Metastatic tumor cells and basal-like tumor cells exert higher integrin-mediated traction forces at the bulk and molecular levels, consistent with a motor-clutch model in which motors and clutches are both increased. Basal-like nonmalignant mammary epithelial cells also display an altered integrin adhesion molecular organization at the nanoscale and recruit a suite of paxillin-associated proteins implicated in invasion and metastasis. Phosphorylation of paxillin by Src family kinases, which regulates adhesion turnover, is similarly enhanced in the metastatic and basal-like tumor cells, fostered by a stiff matrix, and critical for tumor cell invasion in our assays. Bioinformatics reveals an unappreciated relationship between Src kinases, paxillin, and survival of breast cancer patients. Thus adoption of the basal-like adhesion phenotype may favor the recruitment of molecules that facilitate tumor metastasis to integrin-based adhesions. Analysis of the physical properties of tumor cells and integrin adhesion composition in biopsies may be predictive of patient outcome
- ā¦