Phase Transitions and Adsorption Isotherm in Multilayer Adsorbates with Lateral Interactions

We analyze here a model for an adsorbate system composed of many layers by extending a theoretical approach used to describe pattern formation on a monolayer of adsorbates with lateral interactions. The approach shows, in addition to a first order phase transition in the first layer, a transition in the second layer together with evidence of a "cascade" of transitions if more layers are included. The transition profiles, showing a staircase structure, corroborate this picture. The adsorption isotherm that came out of this approach is in qualitative agreement with numerical and experimental results.Comment: Submited to Physica A, LaTex, 22 pgs, 6 figure

Dynamic Scaling of an Adsorption-Diffusion Process on Fractals

A dynamic scaling of a diffusion process involving the Langmuir type adsorption is studied. We find dynamic scaling functions in one and two dimensions and compare them with direct numerical simulations, and we further study the dynamic scaling law on fractal surfaces. The adsorption-diffusion process obeys the fracton dynamics on the fractal surfaces.Comment: 9 pages, 7 figure

Predicting protein decomposition: the case of aspartic-acid racemization kinetics

The increase in proportion of the non-biological (D-) isomer of aspartic acid (Asp) relative to the L- isomer has been widely used in archaeology and geochemistry as a tool for dating. The method has proved controversial, particularly when used for bones. The non-linear kinetics of Asp racemization have prompted a number of suggestions as to the underlying mechanism(s) and have led to the use of mathe- matical transformations which linearize the increase in D-Asp with respect to time. Using one example, a suggestion that the initial rapid phase of Asp racemization is due to a contribution from asparagine (Asn), we demonstrate how a simple model of the degradation and racemization of Asn can be used to predict the observed kinetics. A more complex model of peptide bound Asx (Asn+Asp) racemization, which occurs via the formation of a cyclic succinimide (Asu), can be used to correctly predict Asx racemi- zation kinetics in proteins at high temperatures (95-140 °C). The model fails to predict racemization kinetics in dentine collagen at 37 °C. The reason for this is that Asu formation is highly conformation dependent and is predicted to occur extremely slowly in triple helical collagen. As conformation strongly in£uences the rate of Asu formation and hence Asx racemization, the use of extrapolation from high temperatures to estimate racemization kinetics of Asx in proteins below their denaturation temperature is called into question. In the case of archaeological bone, we argue that the D:L ratio of Asx re£ects the proportion of non- helical to helical collagen, overlain by the e¡ects of leaching of more soluble (and conformationally unconstrained) peptides. Thus, racemization kinetics in bone are potentially unpredictable, and the proposed use of Asx racemization to estimate the extent of DNA depurination in archaeological bones is challenged

Sintering Kinetics of Plasma-Sprayed Zirconia TBCs

A model of the sintering exhibited by EB-PVD TBCs, based on principles of free energy minimization, was recently published by Hutchinson et al. In the current paper, this approach is applied to sintering of plasma-sprayed TBCs and comparisons are made with experimental results. Predictions of through-thickness shrinkage and changing pore surface area are compared with experimental data obtained by dilatometry and BET analysis respectively. The sensitivity of the predictions to initial pore architecture and material properties are assessed. The model can be used to predict the evolution of contact area between overlying splats. This is in turn related to the through-thickness thermal conductivity, using a previously-developed analytical model

Study of alkaline hydrothermal activation of belite cements by thermal analysis

The effect of alkaline hydrothermal activation of class-C fly ash belite cement was studied using thermal analysis (TG/DTG) by determining the increase in the combined water during a period of hydration of 180 days. The results were compared with those obtained for a belite cement hydrothermally activated in water. The two belite cements were fabricated via the hydrothermal-calcination route of class-C fly ash in 1 M NaOH solution (FABC-2-N) or demineralised water (FABC-2-W). From the results, the effect of the alkaline hydrothermal activation of belite cement (FABC-2-N) was clearly differentiated, mainly at early ages of hydration, for which the increase in the combined water was markedly higher than that of the belite cement that was hydrothermally activated in water. Important direct quantitative correlations were obtained among physicochemical parameters, such as the combined water, the BET surface area, the volume of nano-pores, and macro structural engineering properties such as the compressive mechanical strength

Ibuprofen-loaded calcium phosphate granules : combination of innovative characterization methods to relate mechanical strength to drug location

This paper studies the impact of the location of a drug substance on the physicochemical and mechanical properties of two types of calcium phosphate granules loaded with seven different contents of ibuprofen, ranging from 1.75% to 46%. These implantable agglomerates were produced by either low or high shear granulation. Unloaded Mi-Pro pellets presented higher sphericity and mechanical properties, but were slightly less porous than Kenwood granules (57.7% vs 61.2%). Nevertheless, the whole expected quantity of ibuprofen could be integrated into both types of granules. A combination of surface analysis, using near-infrared (NIR) spectroscopy coupling chemical imaging, and pellet porosity, by mercury intrusion measurements, allowed ibuprofen to be located. It was shown that, from 0% to 22% drug content, ibuprofen deposited simultaneously on the granule surface, as evidenced by the increase in surface NIR signal, and inside the pores, as highlighted by the decrease in pore volume. From 22%, porosity was almost filled, and additional drug substance coated the granule surfaces, leading to a large increase in the surface NIR signal. This coating was more regular for Mi-Pro pellets owing to their higher sphericity and greater surface deposition of drug substance. Unit crush tests using a microindenter revealed that ibuprofen loading enhanced the mechanical strength of granules, especially above 22% drug content, which was favorable to further application of the granules as a bone defect filler

Influence of the initial chemical conditions on the rational design of silica particles

The influence of the water content in the initial composition on the size of silica particles produced using the Stöber process is well known. We have shown that there are three morphological regimes defined by compositional boundaries. At low water levels (below stoichiometric ratio of water:tetraethoxysilane), very high surface area and aggregated structures are formed; at high water content (>40 wt%) similar structures are also seen. Between these two boundary conditions, discrete particles are formed whose size are dictated by the water content. Within the compositional regime that enables the classical Stöber silica, the structural evolution shows a more rapid attainment of final particle size than the rate of formation of silica supporting the monomer addition hypothesis. The clearer understanding of the role of the initial composition on the output of this synthesis method will be of considerable use for the establishment of reliable reproducible silica production for future industrial adoption

Simple model of adsorption on external surface of carbon nanotubes: a new analytical approach basing on molecular simulation data

Nitrogen adsorption on carbon nanotubes is wide- ly studied because nitrogen adsorption isotherm measurement is a standard method applied for porosity characterization. A further reason is that carbon nanotubes are potential adsorbents for separation of nitrogen from oxygen in air. The study presented here describes the results of GCMC simulations of nitrogen (three site model) adsorption on single and multi walled closed nanotubes. The results obtained are described by a new adsorption isotherm model proposed in this study. The model can be treated as the tube analogue of the GAB isotherm taking into account the lateral adsorbate-adsorbate interactions. We show that the model describes the simulated data satisfactorily. Next this new approach is applied for a description of experimental data measured on different commercially available (and characterized using HRTEM) carbon nanotubes. We show that generally a quite good fit is observed and therefore it is suggested that the observed mechanism of adsorption in the studied materials is mainly determined by adsorption on tubes separated at large distances, so the tubes behave almost independently

Cherry-stones-based activated carbons as potential adsorbents for CO2/CH4 separation: effect of the activation parameters

This is the accepted version of the following article: Álvarez-Gutiérrez, N., Victoria Gil, M., Rubiera, F. and Pevida, C. (2015), Cherry-stones-based activated carbons as potential adsorbents for CO2/CH4 separation: effect of the activation parameters. Greenhouse Gas Sci Technol, 5: 812–825. doi: 10.1002/ghg.1534, which has been published in final form at http://dx.doi.org/10.1002/ghg.1534A low-cost biomass, cherry stones (CS), was used as a carbon precursor to synthesize two activated carbons to be used for CO2/CH4 separation. Single-step activation with two activating agents, carbon dioxide and steam, was used. The activation conditions that maximize the CO2 adsorption capacity by the adsorbents at 25 ºC and atmospheric pressure were determined by response surface methodology (RSM). The optimum values were 885 ºC and 12% of solid yield when activating with carbon dioxide, but 850 ºC and 15.3% of solid yield when activating with steam. Heating rate did not show a significant effect on the CO2 uptake. CO2 adsorption capacity values up to 11.45 and 10.56 wt.% were achieved under such conditions using carbon dioxide and steam as activating agents, respectively. Carbon dioxide activation promoted the development of microporosity, whereas both micropores and mesopores were developed during steam activation. The CO2/CH4 separation performance at 3 bar of the optimum adsorbents indicated that both cherry-stones-based activated carbons could have great potential as CO2 adsorbents for CO2/CH4 separation. The adsorbent activated with carbon dioxide, CS-CO2, showed a slightly higher adsorption capacity, but the steam-activated sample, CS-H2O, had an enhanced selectivity to separate CO2 from CO2/CH4 binary mixtures.This work was carried out with financial support from the Spanish MINECO (Project ENE2011-23467), co-financed by the European Regional Development Fund (ERDF) and from the Gobierno del Principado de Asturias (PCTI-GRUPIN14-079)Peer reviewe

Cations extraction of sandy-clay soils from Cavado valley, Portugal, using sodium salts solutions

Cases of contamination by metals in the water wells of the Cavado Valley in north-west Portugal can be attributed to the heavy leaching of clay soils due to an excess of nitrogen resulting from the intensive use of fertilisers in agricultural areas. This work focuses on the natural weathering characteristics of soils, particularly the clay material, through the study of samples collected near the River Cavado. Samples taken from various sites, after physico-chemical characterisation, were subjected to clay dissolution tests, using sodium salts of different ionic forces, to detect the relationship between certain physico-chemical parameters of water, such as pH, nitrate, chloride and sulphate content, in the dissolution of clay and the subsequent extraction of such cations as Al, Fe and K. In acidic sandy clay soils, the mineralogical composition of which was characterised by a predominance of quartz, micas, kaolinite and K-feldspars, decreases of the clay material/water pH ratio increases dissolution of the micaceous and K-feldspars phases. The presence of nitrates in the aqueous solution apparently advanced the extraction of all three cations Al, Fe and K. The specific surface area of the clay material showed a significant correlation with the main kinetic parameters of cation extraction.Têm ocorrido casos de contaminações de águas de poços, por metais, no vale do Rio Cávado, região noroeste de Portugal. A princípio, poderiam ser explicáveis pela elevada lixiviação dos solos arenoargilosos da região, quando da prática de adubações intensivas de nitrogênio em áreas agrícolas. Assim, estudaram-se as características do intemperismo natural dos solos, particularmente da fração argila, característica da margem norte do rio Cávado. Coletaram-se amostras de vários locais, que foram submetidas, após caracterização físico-química, a ensaios de dissolução a partir de soluções de sais de sódio com diferentes forças iônicas. O objetivo foi observar as relações de determinados parâmetros físico-químicos da água, tais como: pH, nitratos, cloretos e sulfatos na dissolução das argilas e a conseqüente extração de espécies químicas tais como Al, K e Fe. Para solos areno-argilosos, ácidos, cuja composição mineralógica se caracteriza por um predomínio de quartzo, micas, caulinita e feldspato-K, o abaixamento do pH da suspensão solo/água promove a solubilização das fases micáceas e feldspáticas. A presença do nitrato nas soluções aquosas promoveu aparentemente a extração de todos os três cátions: Al, K e Fe. O efeito da área superfícial específica das partículas dos solos condicionou fortemente vários dos parâmetros cinéticos estudados relativos à extração dos cátions.(undefined