High-precision measurements of seawater Pb isotope compositions by double spike thermal ionization mass spectrometry

A new method for the determination of seawater Pb isotope compositions and concentrations was developed, which combines and optimizes previously published protocols for the separation and isotopic analysis of this element. For isotopic analysis, the procedure involves initial separation of Pb from 1 to 2 L of seawater by co-precipitation with Mg hydroxide and further purification by a two stage anion exchange procedure. The Pb isotope measurements are subsequently carried out by thermal ionization mass spectrometry using a Pb-207-Pb-204 double spike for correction of instrumental mass fractionation. These methods are associated with a total procedural Pb blank of 28 +/- 21 pg(1sd) and typical Pb recoveries of 40-60%. The Pb concentrations are determined by isotope dilution (ID) on 50 mL of seawater, using a simplified version of above methods. Analyses of multiple aliquots of six seawater samples yield a reproducibility of about +/- 1to +/- 10%(1sd) for Pb concentrations of between 7 and 50 pmol/kg, where precision was primarily limited by the uncertainty of the blank correction (12 +/- 4 pg; 1sd). For the Pb isotope analyses, typical reproducibilities (+/- 2sd) of 700-1500 ppm and 1000-2000ppm were achieved for Pb-207/Pb-206, Pb-208/Pb-206 and Pb-206/Pb-204, Pb-207/Pb-204, Pb-208/Pb-204, respectively. These results are superior to literature data that were obtained using plasma source mass spectrometry and they are at least a factor of five more precise for ratios involving the minor Pb-204 isotope. Both Pb concentration and isotope data, furthermore, show good agreement with published results for two seawater intercomparison samples of the GEOTRACES program. Finally, the new methods were applied to a seawater depth profile from the eastern South Atlantic. Both Pb contents and isotope compositions display a smooth evolution with depth, and no obvious outliers. Compared to previous Pb isotope data for seawater, the Pb-206/Pb-204 ratios are well correlated with Pb-207/Pb-206, underlining the significant improvement achieved in the measurement of the minor Pb-204 isotope

The distribution of lead concentrations and isotope compositions in the eastern Tropical Atlantic Ocean

Anthropogenic emissions have dominated marine Pb sources during the past century. Here we present Pb concentrations and isotope compositions for ocean depth profiles collected in the eastern Tropical Atlantic Ocean (GEOTRACES section GA06), to trace the transfer of anthropogenic Pb into the ocean interior. Variations in Pb concentration and isotope composition were associated with changes in hydrography. Water masses ventilated in the southern hemisphere generally featured lower 206Pb/207Pb and 208Pb/207Pb ratios than those ventilated in the northern hemisphere, in accordance with Pb isotope data of historic anthropogenic Pb emissions. The distributions of Pb concentrations and isotope compositions in northern sourced waters were consistent with differences in their ventilation timescales. For example, a Pb concentration maximum at intermediate depth (600–900 m, 35 pmol kg−1) in waters sourced from the Irminger/Labrador Seas, is associated with Pb isotope compositions (206Pb/207Pb = 1.1818–1.1824, 208Pb/207Pb = 2.4472–2.4483) indicative of northern hemispheric emissions during the 1950s and 1960s close to peak leaded petrol usage, and a transit time of ∼50–60 years. In contrast, North Atlantic Deep Water (2000–4000 m water depth) featured lower Pb concentrations and isotope compositions (206Pb/207Pb = 1.1762–1.184, 208Pb/207Pb = 2.4482–2.4545) indicative of northern hemispheric emissions during the 1910s and 1930s and a transit time of ∼80–100 years. This supports the notion that transient anthropogenic Pb inputs are predominantly transferred into the ocean interior by water mass transport. However, the interpretation of Pb concentration and isotope composition distributions in terms of ventilation timescales and pathways is complicated by (1) the chemical reactivity of Pb in the ocean, and (2) mixing of waters ventilated during different time periods. The complex effects of water mass mixing on Pb distributions is particularly apparent in seawater in the Tropical Atlantic Ocean which is ventilated from the southern hemisphere. In particular, South Atlantic Central Water and Antarctic Intermediate Water were dominated by anthropogenic Pb emitted during the last 50–100 years, despite estimates of much older average ventilation ages in this region

Barium isotopes in mid-ocean ridge hydrothermal vent fluids : a source of isotopically heavy Ba to the ocean

Funding: These field and related experimental studies were supported through US NSF grants: 0549547, 0751771, 0813861, 0961188 and 1736679 (WES).Mid-ocean ridge (MOR) hydrothermal vent fluids are enriched with dissolved barium, but due to barite (BaSO4) precipitation during mixing between Ba-bearing vent fluids and SO4-bearing seawater, the magnitude of hydrothermal Ba input to the ocean remains uncertain. Deep-ocean Ba isotopes show evidence for non-conservative behavior, which might be explained by input of isotopically heavy hydrothermal Ba. In this study we present the first Ba isotope data in mid-ocean ridge hydrothermal vent fluids and particles from systems on the Mid-Atlantic Ridge (Rainbow 36°N and TAG 26°N), the East Pacific Rise (EPR9–10°N and 13°N) and the Juan de Fuca Ridge (MEF and ASHES). The vent fluids display a wide range of dissolved Ba concentrations from 0.43 to 97.9 μmol/kg and δ138/134Ba values from −0.26 to +0.91‰, but are modified relative to initial composition due to precipitation of barite. Calculated endmember vent fluid δ138/134Ba values, prior to barite precipitation, are between −0.17 and +0.09‰, consistent with the values observed in oceanic basalts and pelagic sediments. Water-rock interaction at depth in the oceanic crust appears to occur without Ba isotope fractionation. During subsequent venting and mixing with seawater, barite precipitation preferentially removes isotopically light Ba from vent fluids with a fractionation factor of Δ138/134Bahyd-barite-fluid = −0.35 ± 0.10‰ (2SE, n = 2). Based on knowledge of barite saturation and isotope fractionation during precipitation, the effective hydrothermal Ba component that mixes with seawater after barite precipitation has completed can be calculated: δ138/134Bahyd = +1.7 ± 0.7‰ (2SD). This value is isotopically heavier than deep ocean waters and may explain the observed non-conservative of Ba isotopes in deep waters. These new constraints on hydrothermal Ba compositions enable the hydrothermal input of Ba to Atlantic deep waters to be assessed at ≈3–9% of the observed Ba. Barium isotopes might be used as a tracer to reconstruct the history of hydrothermal Ba inputs and seawater SO4 concentrations in the past.PostprintPeer reviewe

Quantifying CO2 Removal at Enhanced Weathering Sites: a Multiproxy Approach

Enhanced weathering is a carbon dioxide (CO 2) mitigation strategy that promises large scale atmospheric CO 2 removal. The main challenge associated with enhanced weathering is monitoring, reporting, and verifying (MRV) the amount of carbon removed as a result of enhanced weathering reactions. Here, we study a CO 2 mineralization site in Consett, Co. Durham, UK, where steel slags have been weathered in a landscaped deposit for over 40 years. We provide new radiocarbon, δ 13 C, 87 Sr/ 86 Sr, and major element data in waters, calcite precipitates, and soils to quantify the rate of carbon removal. We demonstrate that measuring the radiocarbon activity of CaCO 3 deposited in waters draining the slag deposit provides a robust constraint on the carbon source being sequestered (80% from the atmosphere, 2σ = 8%) and use downstream alkalinity measurements to determine the proportion of carbon exported to the ocean. The main phases dissolving in the slag are hydroxide minerals (e.g., portlandite) with minor contributions (<3%) from silicate minerals. We propose a novel method for quantifying carbon removal rates at enhanced weathering sites, which is a function of the radiocarbon-apportioned sources of carbon being sequestered, and the proportion of carbon being exported from the catchment to the oceans

Overview of the techniques used for the study of non-terrestrial bodies: Proposition of novel non-destructive methodology

Meteorites and impact glasses have been largely analysed using different techniques, but most studies have been focused on their geologicalemineralogical characterization and isotopic ratios, mainly of a destructive nature. However, much more information can be gained by applying novel non-destructive analytical procedures and techniques that have been scarcely used to analyse these materials. This overview presents some new methodologies to study these materials and compares these new approaches with the commonly used ones. Techniques such as X-Ray Fluorescence (XRF) and Laser Induced Breakdown Spectroscopy (LIBS), for elemental characterization, the hyphenated Raman spectroscopy- SEM/EDS and the combination of them, allow extracting simultaneous information from elemental, molecular and structural data of the studied sample; furthermore, the spectroscopic image capabilities of such techniques allow a better understanding of the mineralogical distribution. © 2017 Elsevier B.V. All rights reserved.Ministerio de Economía, Industria y Competitividad (project ESP2014-56138-C3-2-R

Controls on the barium isotope compositions of marine sediments

The accumulation of barium (Ba) in marine sediments is considered to be a robust proxy for export production, although this application can be limited by uncertainty in BaSO4 preservation and sediment mass accumulation rates. The Ba isotope compositions of marine sediments could potentially record insights into past changes in the marine Ba cycle, which should be insensitive to these limitations, enabling more robust interpretation of sedimentary Ba as a proxy. To investigate the controls on the Ba isotope compositions of marine sediments and their potential for paleo-oceanographic applications, we present the first Ba isotope compositions results for sediments, as well as overlying seawater depth profiles collected in the South Atlantic. Variations in Ba isotope compositions of the sediments predominantly reflect changes in the relative contributions of detrital and authigenic Ba sources, with open-ocean sediments constraining the isotope composition of authigenic Ba to be 138/134 Ba ≈ +0.1 ‰. This value is consistent with the average isotope composition inferred for sinking particulate Ba using simple mass balance models of Ba in the overlying water column and is hypothesized to reflect the removal of Ba from the upper water column with an associated isotopic fractionation of Δ 138/134 Ba diss - part ≈ +0.4 to +0.5. Perturbations to upper ocean Ba cycling, due to changes in export production and the supply of Ba via upwelling, should therefore be recorded by the isotope compositions of sedimentary authigenic Ba. Such insights will help to improve the reliable application of Ba accumulation rates in marine sediments as a proxy for past changes in export production

Barium isotopes in cold-water corals

Recent studies have introduced stable Ba isotopes (delta(138)/Ba-134) as a novel tracer for ocean processes. Ba isotopes could potentially provide insight into the oceanic Ba cycle, the ocean's biological pump, water-mass provenance in the deep ocean, changes in activity of hydrothermal vents, and land-sea interactions including tracing riverine inputs. Here, we show that aragonite skeletons of various colonial and solitary cold-water coral (CWC) taxa record the seawater (SW) Ba isotope composition. Thirty-six corals of eight different taxa from three oceanic regions were analysed and compared to delta(138)/Ba-134 measurements of co-located seawater samples. Sites were chosen to cover a wide range of temperature, salinity, Ba concentrations and Ba isotope compositions. Seawater samples at the three sites exhibit the well-established anti-correlation between Ba concentration and delta(138)/Ba-134. Furthermore, our data set suggests that Ba/Ca values in CWCs are linearly correlated with dissolved Ba] in ambient seawater, with an average partition coefficient of D-CWC/SW = 1.8 +/- 0.4 (2SD). The mean isotope fractionation of Ba between seawater and CWCs Delta(138)/Ba-134(CWC-SW) is -0.21 +/- 0.08 parts per thousand (2SD), indicating that CWC aragonite preferentially incorporates the lighter isotopes. This fractionation likely does not depend on temperature or other environmental variables, suggesting that aragonite CWCs could be used to trace the Ba isotope composition in ambient seawater. Coupled Ba] and delta(138)/Ba-134 analysis on fossil CWCs has the potential to provide new information about past changes in the local and global relationship between Ba] and delta(138)/Ba-134 and hence about the operation of the past global oceanic Ba cycle in different climate regimes. (C) 2018 Elsevier B.V. All rights reserved

Barium isotopes in mid-ocean ridge hydrothermal vent fluids: A source of isotopically heavy Ba to the ocean

Mid-ocean ridge (MOR) hydrothermal vent fluids are enriched with dissolved barium, but due to barite (BaSO4) precipitation during mixing between Ba-bearing vent fluids and SO4-bearing seawater, the magnitude of hydrothermal Ba input to the ocean remains uncertain. Deep-ocean Ba isotopes show evidence for non-conservative behavior, which might be explained by input of isotopically heavy hydrothermal Ba. In this study we present the first Ba isotope data in mid-ocean ridge hydrothermal vent fluids and particles from systems on the Mid-Atlantic Ridge (Rainbow 36°N and TAG 26°N), the East Pacific Rise (EPR9–10°N and 13°N) and the Juan de Fuca Ridge (MEF and ASHES). The vent fluids display a wide range of dissolved Ba concentrations from 0.43 to 97.9 μmol/kg and δ138/134Ba values from −0.26 to +0.91‰, but are modified relative to initial composition due to precipitation of barite. Calculated endmember vent fluid δ138/134Ba values, prior to barite precipitation, are between −0.17 and +0.09‰, consistent with the values observed in oceanic basalts and pelagic sediments. Water-rock interaction at depth in the oceanic crust appears to occur without Ba isotope fractionation. During subsequent venting and mixing with seawater, barite precipitation preferentially removes isotopically light Ba from vent fluids with a fractionation factor of Δ138/134Bahyd-barite-fluid = −0.35 ± 0.10‰ (2SE, n = 2). Based on knowledge of barite saturation and isotope fractionation during precipitation, the effective hydrothermal Ba component that mixes with seawater after barite precipitation has completed can be calculated: δ138/134Bahyd = +1.7 ± 0.7‰ (2SD). This value is isotopically heavier than deep ocean waters and may explain the observed non-conservative of Ba isotopes in deep waters. These new constraints on hydrothermal Ba compositions enable the hydrothermal input of Ba to Atlantic deep waters to be assessed at ≈3–9% of the observed Ba. Barium isotopes might be used as a tracer to reconstruct the history of hydrothermal Ba inputs and seawater SO4 concentrations in the past

Barium isotopes in cold-water corals

Recent studies have introduced stable Ba isotopes (δ138/134δ138/134Ba) as a novel tracer for ocean processes. Ba isotopes could potentially provide insight into the oceanic Ba cycle, the ocean's biological pump, water-mass provenance in the deep ocean, changes in activity of hydrothermal vents, and land-sea interactions including tracing riverine inputs. Here, we show that aragonite skeletons of various colonial and solitary cold-water coral (CWC) taxa record the seawater (SW) Ba isotope composition. Thirty-six corals of eight different taxa from three oceanic regions were analysed and compared to δ138/134δ138/134Ba measurements of co-located seawater samples. Sites were chosen to cover a wide range of temperature, salinity, Ba concentrations and Ba isotope compositions. Seawater samples at the three sites exhibit the well-established anti-correlation between Ba concentration and δ138/134δ138/134Ba. Furthermore, our data set suggests that Ba/Ca values in CWCs are linearly correlated with dissolved [Ba] in ambient seawater, with an average partition coefficient of DCWC/SW = 1.8 ± 0.4 (2SD). The mean isotope fractionation of Ba between seawater and CWCs Δ138/134BaCWC–SW is −0.21 ± 0.08‰ (2SD), indicating that CWC aragonite preferentially incorporates the lighter isotopes. This fractionation likely does not depend on temperature or other environmental variables, suggesting that aragonite CWCs could be used to trace the Ba isotope composition in ambient seawater. Coupled [Ba] and δ138/134δ138/134Ba analysis on fossil CWCs has the potential to provide new information about past changes in the local and global relationship between [Ba] and δ138/134δ138/134Ba and hence about the operation of the past global oceanic Ba cycle in different climate regimes

Tracing natural and anthropogenic sources of aerosols to the Atlantic Ocean using Zn and Cu isotopes

Anthropogenic activities have significantly enhanced atmospheric metal inputs to the ocean, which has potentially important consequences for marine ecosystems. This study assesses the potential of Zn and Cu isotope compositions to distinguish between natural and anthropogenic atmospheric inputs of these metals to the surface ocean. To this end, the isotopic compositions of Zn and Cu in aerosols collected from the eastern tropical Atlantic Ocean on the GEOTRACES GA06 cruise are examined. Enrichment factors and fractional solubility measurements indicate the presence of a significant anthropogenic component in the aerosols collected furthest from the North African dust plume for both Zn and Cu. The mean 65CuNIST SRM 976 for the fully digested aerosols is +0.07 ± 0.39 ‰ (n = 9, 2 SD), which is indistinguishable from the lithogenic value, and implies that Cu isotopes are not an effective tracer of aerosol sources in this region. The mean 66ZnJMC-Lyon value for the aerosols that underwent a total digestion is +0.17 ± 0.22 ‰ (n = 11, 2 SD). The aerosols leached with ammonium acetate have similar Zn isotope compositions, with a mean of +0.15 ± 0.16 ‰ (n = 7, 2 SD). The aerosols were collected in a region with prevalent mineral dust but, despite this, exhibit isotopically lighter Zn than lithogenic Zn with 66Zn ≈ +0.3 ‰. When coupled with the previously published Pb isotope data, the aerosols exhibit coupled Zn-Pb isotope systematics that are indicative of mixing between mineral dust (66Zn = +0.28 ‰ and 206Pb/207Pb = 1.205) and anthropogenic emissions (66Zn = -0.22 ‰ and 206Pb/207Pb = 1.129). This demonstrates the potential of Zn isotopes to trace atmospheric Zn inputs from anthropogenic sources to the surface ocean.NERC grants N/L002515/1, NE/P018181/2 and NE/G016585/