94 research outputs found

    Thermoluminescence, photoluminescence and optically stimulated luminescence characteristics of CaSO4:Eu phosphor: experimental and density functional theory (DFT) investigations

    Get PDF
    The CaSO4:Eu phosphor in nanocrystalline form was obtained by chemical method. The sample was annealed at various temperatures and quenched. The structural, electronic and optical properties are studied using various experimental techniques. As synthesized CaSO4:Eu particles have nanorod shapes with diameter of ~15 nm and length of ~250 nm. After annealing (at around 900 °C) a significant increase in their size (~2–4 μm) with phase transformation from hexagonal to orthorhombic was observed. Thermoluminescence (TL) and optically stimulated luminescence (OSL) intensities were found to increase with temperature up to 900 °C and decrease thereafter for 1 Gy of test dose of β-rays from 90Sr-90Yr source. However, the maximum OSL sensitivity was found to be more than that of CaSO4:Eu microcrystalline phosphor (prepared by acid recrystallization method) contrary to the usually found in the literature but much less than that of commercially available α-Al2O3:C phosphor. The activation energy for thermally assisted OSL process was found to be 0.0572 ± 0.0028 eV. The dose ranges of TL and OSL response was found from 0.04 Gy to 100 Gy and 0.02 Gy–100 Gy, respectively. The experimental results are also correlated with computational calculations based on density functional theory (DFT). The crystal structures and electronic structures of both hexagonal and orthorhombic CaSO4 and CaSO4:Eu materials show that they are direct band gap (5.67–5.86 eV) insulators, with Ca2+ substitution by Eu2+ found to introduce donor states in the band gap near Fermi level and the valence band edge of CaSO4 on doping with Eu2+ impurity ions

    The structure and dynamics of young star clusters: King 16, NGC 1931, NGC 637 and NGC 189

    Full text link
    In this paper, using 2MASS photometry, we study the structural and dynamical properties of four young star clusters viz. King 16, NGC 1931, NGC 637 and NGC 189. For the clusters King 16, NGC 1931, NGC 637 and NGC 189, we obtain the limiting radii of 7', 12', 6' and 5' which correspond to linear radii of 3.6 pc, 8.85 pc, 3.96 pc and 2.8 pc respectively. The reddening values E(BV)E(B-V) obtained for the clusters are 0.85, 0.65--0.85, 0.6 and 0.53 and their true distances are 1786 pc, 3062 pc, 2270 pc and 912 pc respectively. Ages of the clusters are 6 Myr, 4 Myr, 4 Myr and 10 Myr respectively. We compare their structures, luminosity functions and mass functions (ϕ(M)=dN/dMM(1+χ)\phi(M) = dN/dM \propto M^{-(1+\chi)}) to the parameter τ=tage/trelax\tau = t_{age}/t_{relax} to study the star formation process and the dynamical evolution of these clusters. We find that, for our sample, mass seggregation is observed in clusters or their cores only when the ages of the clusters are comparable to their relaxation times (τ1\tau \geq 1). These results suggest mass seggregation due to dynamical effects. The values of χ\chi, which characterise the overall mass functions for the clusters are 0.96 ±\pm 0.11, 1.16 ±\pm 0.18, 0.55 ±\pm 0.14 and 0.66 ±\pm 0.31 respectively. The change in χ\chi as a function of radius is a good indicator of the dynamical state of clusters.Comment: Accepted for publication in Astrophysics & Space Scienc

    Use of SMS texts for facilitating access to online alcohol interventions: a feasibility study

    Get PDF
    A41 Use of SMS texts for facilitating access to online alcohol interventions: a feasibility study In: Addiction Science & Clinical Practice 2017, 12(Suppl 1): A4

    Search for gravitational-wave transients associated with magnetar bursts in advanced LIGO and advanced Virgo data from the third observing run

    Get PDF
    Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant f lares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and longduration (∼100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo, and KAGRA’s third observation run. These 13 bursts come from two magnetars, SGR1935 +2154 and SwiftJ1818.0−1607. We also include three other electromagnetic burst events detected by FermiGBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper limits on the rms of the integrated incident gravitational-wave strain that reach 3.6 × 10−²³ Hz at 100 Hz for the short-duration search and 1.1 ×10−²² Hz at 450 Hz for the long-duration search. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to 2.3 × 10−²² Hz. Using the estimated distance to each magnetar, we derive upper limits upper limits on the emitted gravitational-wave energy of 1.5 × 1044 erg (1.0 × 1044 erg) for SGR 1935+2154 and 9.4 × 10^43 erg (1.3 × 1044 erg) for Swift J1818.0−1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst fluences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935+2154 with the available fluence information. The lowest of these ratios is 4.5 × 103

    Open data from the third observing run of LIGO, Virgo, KAGRA, and GEO

    Get PDF
    The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in 2019 April and lasting six months, O3b starting in 2019 November and lasting five months, and O3GK starting in 2020 April and lasting two weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main data set, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages

    A joint Fermi-GBM and Swift-BAT analysis of gravitational-wave candidates from the third gravitational-wave observing run

    Get PDF
    We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational-wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM onboard triggers and subthreshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma rays from binary black hole mergers

    Constraints on the cosmic expansion history from GWTC–3

    Get PDF
    We use 47 gravitational wave sources from the Third LIGO–Virgo–Kamioka Gravitational Wave Detector Gravitational Wave Transient Catalog (GWTC–3) to estimate the Hubble parameter H(z), including its current value, the Hubble constant H0. Each gravitational wave (GW) signal provides the luminosity distance to the source, and we estimate the corresponding redshift using two methods: the redshifted masses and a galaxy catalog. Using the binary black hole (BBH) redshifted masses, we simultaneously infer the source mass distribution and H(z). The source mass distribution displays a peak around 34 M⊙, followed by a drop-off. Assuming this mass scale does not evolve with the redshift results in a H(z) measurement, yielding H0=688+12km  s1Mpc1{H}_{0}={68}_{-8}^{+12}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1} (68% credible interval) when combined with the H0 measurement from GW170817 and its electromagnetic counterpart. This represents an improvement of 17% with respect to the H0 estimate from GWTC–1. The second method associates each GW event with its probable host galaxy in the catalog GLADE+, statistically marginalizing over the redshifts of each event's potential hosts. Assuming a fixed BBH population, we estimate a value of H0=686+8km  s1Mpc1{H}_{0}={68}_{-6}^{+8}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1} with the galaxy catalog method, an improvement of 42% with respect to our GWTC–1 result and 20% with respect to recent H0 studies using GWTC–2 events. However, we show that this result is strongly impacted by assumptions about the BBH source mass distribution; the only event which is not strongly impacted by such assumptions (and is thus informative about H0) is the well-localized event GW190814

    Thermoluminescent Phosphors for Radiation Dosimetry

    No full text

    C-Rh (Carbon - Rhodium)

    No full text

    Radiochromic film measurement of anisotropy function for high-dose-rate Ir-192 brachytherapy source

    No full text
    The dose distribution produced by the high-dose-rate (HDR) 192Ir source is inherently anisotropic due to self-absorption by the high-density source core, oblique filtration by the source capsule and the asymmetric geometry of the source capsule. To account for the dose distribution anisotropy of brachytherapy sources, AAPM Task Group No 43 has included a two-dimensional anisotropy function, F(r, \u3b8), in the recommended dose calculation formalism. Gafchromic HS radiochromic film (RCF) was used to measure anisotropy function for microSelectron HDR 192Ir source (classic/old design). Measurements were carried out in a water phantom using specially fabricated PMMA cylinders at radial distances 1, 2, 3, 4 and 5 cm. The data so generated are comparable to both experimental and Monte Carlo calculated values for this source reported earlier by other authors. The RCF method described in this paper is comparatively high resolution, simple to use and is a general method, which can be applied for other brachytherapy sources as well
    corecore