Evaluation of a Thermoelectric Generation system based on Differential-Power Processing architecture under non-uniform temperature conditions

This paper presents a Differential Power Processing (DPP) architecture applied to series-connected thermoelectric generators (TEG). Currently, thermoelectric technology is being considered as a promising power generation technology that can be used to recover waste heat energy. Thus, a thermoelectric generation system is studied under non-uniform temperature conditions in multiple TEG devices. The main objective is to allow each thermoelectric sub-module to reach its maximum power point more quickly. The purpose has been to improve the maximum power point tracking (MPPT) in each sub-module, thus it is possible to increase the efficiency with respect to the traditional method based on a global MPPT. Differential Power converters have been implemented in each TEG sub-module to provide an effective solution and mitigate the impact of the mismatch in the power obtained. The DPP architecture consists of a small micro-converter, at the submodular level, applied to the thermoelectric cell. The control algorithm is oriented to polarize each TEG device at its optimal point, which allows us an active balancing among the different TEG sub-modules regardless of the operating temperature. Matlab-Simulink has been the software used to develop the TEG module-Array

High dosage thermoluminescence diamond dosimeters

Diamond thin films have been irradiated with high doses (up to 12.8 kGy) of ⁹⁰Sr beta particles. The diamond thin films have been synthesized from commercial Tequila as a precursor using pulsed liquid injection by chemical vapor deposition technique reported recently. Thermoluminescence phenomena at these doses exhibit peak curve shift to higher temperatures (from 370 to 440 K) in the glow curve and the integrated thermoluminescence curve show a linear behavior. Therefore, it has been considered that diamond thin films could be used as high doses dosimeters.Алмазні тонкі плівки, які було синтезовано хімічним осадженням парів з промислово виробленої Текіли в якості прекурсору з використанням методу імпульсного упорскування рідини, про який було нещодавно повідомлено, опромінювали високими (до 12,8 кГр) дозами бета-частинок ⁹⁰Sr. При таких дозах опромінення максимум кривої термолюмінесценції зсувається до більш високих (від 370 до 440 K) температур і залежність інтегрованої термолюмінесценції від дози опромінювання є лінійною. Тому алмазні тонкі плівки можуть бути використані як дозиметри при високих дозах опромінювання.Алмазные тонкие пленки, которые были синтезированы химическим осаждением паров из промышленно произведенной Текилы в качестве прекурсора при использовании метода импульсного впрыскивания жидкости, о котором недавно было сообщено, облучали высокими (до 12,8 кГр) дозами бета-частиц ⁹⁰Sr. При таких дозах облучения максимум кривой термолюминесценции сдвигается в область более высоких (от 370 до 440 K) температур и зависимость интегрированной термолюминесценции от дозы облучения является линейной. Поєтому алмазные тонкие пленки могут быть использованы как дозиметры при высоких дозах облучения

PetIGA: A framework for high-performance isogeometric analysis

We present PetIGA, a code framework to approximate the solution of partial differential equations using isogeometric analysis. PetIGA can be used to assemble matrices and vectors which come from a Galerkin weak form, discretized with Non-Uniform Rational B-spline basis functions. We base our framework on PETSc, a high-performance library for the scalable solution of partial differential equations, which simplifies the development of large-scale scientific codes, provides a rich environment for prototyping, and separates parallelism from algorithm choice. We describe the implementation of PetIGA, and exemplify its use by solving a model nonlinear problem. To illustrate the robustness and flexibility of PetIGA, we solve some challenging nonlinear partial differential equations that include problems in both solid and fluid mechanics. We show strong scaling results on up to 4096 cores, which confirm the suitability of PetIGA for large scale simulations

Effectiveness and safety of first-generation protease inhibitors in clinical practice: Hepatitis C virus patients with advanced fibrosis

AIM: To evaluates the effectiveness and safety of the first generation, NS3/4A protease inhibitors (PIs) in clinical practice against chronic C virus, especially in patients with advanced fibrosis. METHODS: Prospective study and non-experimental analysis of a multicentre cohort of 38 Spanish hospitals that includes patients with chronic hepatitis C genotype 1, treatment-nai¨ve (TN) or treatment-experienced (TE), who underwent triple therapy with the first generation NS3/4A protease inhibitors, boceprevir (BOC) and telaprevir (TVR), in combination with pegylated interferon and ribavirin. The patients were treatment in routine practice settings. Data on the study population and on adverse clinical and virologic effects were compiled during the treatment period and during follow up. RESULTS: One thousand and fifty seven patients were included, 405 (38%) were treated with BOC and 652 (62%) with TVR. Of this total, 30% (n = 319) were TN and the remaining were TE: 28% (n = 298) relapsers, 12% (n = 123) partial responders (PR), 25% (n = 260) null-responders (NR) and for 5% (n = 57) with prior response unknown. The rate of sustained virologic response (SVR) by intention-to-treatment (ITT) was greater in those treated with TVR (65%) than in those treated with BOC (52%) (P < 0.0001), whereas by modified intention-to-treatment (mITT) no were found significant differences. By degree of fibrosis, 56% of patients were F4 and the highest SVR rates were recorded in the non-F4 patients, both TN and TE. In the analysis by groups, the TN patients treated with TVR by ITT showed a higher SVR (P = 0.005). However, by mITT there were no significant differences between BOC and TVR. In the multivariate analysis by mITT, the significant SVR factors were relapsers, IL28B CC and non-F4; the type of treatment (BOC or TVR) was not significant. The lowest SVR values were presented by the F4-NR patients, treated with BOC (46%) or with TVR (45%). 28% of the patients interrupted the treatment, mainly by non-viral response (51%): this outcome was more frequent in the TE than in the TN patients (57% vs 40%, P = 0.01). With respect to severe haematological disorders, neutropaenia was more likely to affect the patients treated with BOC (33% vs 20%, P = 0.0001), and thrombocytopaenia and anaemia, the F4 patients (P = 0.000, P = 0.025, respectively). CONCLUSION: In a real clinical practice setting with a high proportion of patients with advanced fibrosis, effectiveness of first-generation PIs was high except for NR patients, with similar SVR rates being achieved by BOC and TVR

Relationship of Weather Types on the Seasonal and Spatial Variability of Rainfall, Runoff, and Sediment Yield in the Western Mediterranean Basin

Rainfall is the key factor to understand soil erosion processes, mechanisms, and rates. Most research was conducted to determine rainfall characteristics and their relationship with soil erosion (erosivity) but there is little information about how atmospheric patterns control soil losses, and this is important to enable sustainable environmental planning and risk prevention. We investigated the temporal and spatial variability of the relationships of rainfall, runoff, and sediment yield with atmospheric patterns (weather types, WTs) in the western Mediterranean basin. For this purpose, we analyzed a large database of rainfall events collected between 1985 and 2015 in 46 experimental plots and catchments with the aim to: (i) evaluate seasonal differences in the contribution of rainfall, runoff, and sediment yield produced by the WTs; and (ii) to analyze the seasonal efficiency of the different WTs (relation frequency and magnitude) related to rainfall, runoff, and sediment yield. The results indicate two different temporal patterns: the first weather type exhibits (during the cold period: autumn and winter) westerly flows that produce the highest rainfall, runoff, and sediment yield values throughout the territory; the second weather type exhibits easterly flows that predominate during the warm period (spring and summer) and it is located on the Mediterranean coast of the Iberian Peninsula. However, the cyclonic situations present high frequency throughout the whole year with a large influence extended around the western Mediterranean basin. Contrary, the anticyclonic situations, despite of its high frequency, do not contribute significantly to the total rainfall, runoff, and sediment (showing the lowest efficiency) because of atmospheric stability that currently characterize this atmospheric pattern. Our approach helps to better understand the relationship of WTs on the seasonal and spatial variability of rainfall, runoff and sediment yield with a regional scale based on the large dataset and number of soil erosion experimental stations.Spanish Government (Ministry of Economy and Competitiveness, MINECO) and FEDER Projects: CGL2014 52135-C3-3-R, ESP2017-89463-C3-3-R, CGL2014-59946-R, CGL2015-65569-R, CGL2015-64284-C2-2-R, CGL2015-64284-C2-1-R, CGL2016-78075-P, GL2008-02879/BTE, LEDDRA 243857, RECARE-FP7, CGL2017-83866-C3-1-R, and PCIN-2017-061/AEI. Dhais Peña-Angulo received a “Juan de la Cierva” postdoctoral contract (FJCI-2017-33652 Spanish Ministry of Economy and Competitiveness, MEC). Ana Lucia acknowledge the "Brigitte-Schlieben-Lange-Programm". The “Geoenvironmental Processes and Global Change” (E02_17R) was financed by the Aragón Government and the European Social Fund. José Andrés López-Tarazón acknowledges the Secretariat for Universities and Research of the Department of the Economy and Knowledge of the Autonomous Government of Catalonia for supporting the Consolidated Research Group 2014 SGR 645 (RIUS- Fluvial Dynamics Research Group). Artemi Cerdà thank the funding of the OCDE TAD/CRP JA00088807. José Martínez-Fernandez acknowledges the project Unidad de Excelencia CLU-2018-04 co-funded by FEDER and Castilla y León Government. Ane Zabaleta is supported by the Hydro-Environmental Processes consolidated research group (IT1029-16, Basque Government). This paper has the benefit of the Lab and Field Data Pool created within the framework of the COST action CONNECTEUR (ES1306)

CIBERER : Spanish national network for research on rare diseases: A highly productive collaborative initiative

Altres ajuts: Instituto de Salud Carlos III (ISCIII); Ministerio de Ciencia e Innovación.CIBER (Center for Biomedical Network Research; Centro de Investigación Biomédica En Red) is a public national consortium created in 2006 under the umbrella of the Spanish National Institute of Health Carlos III (ISCIII). This innovative research structure comprises 11 different specific areas dedicated to the main public health priorities in the National Health System. CIBERER, the thematic area of CIBER focused on rare diseases (RDs) currently consists of 75 research groups belonging to universities, research centers, and hospitals of the entire country. CIBERER's mission is to be a center prioritizing and favoring collaboration and cooperation between biomedical and clinical research groups, with special emphasis on the aspects of genetic, molecular, biochemical, and cellular research of RDs. This research is the basis for providing new tools for the diagnosis and therapy of low-prevalence diseases, in line with the International Rare Diseases Research Consortium (IRDiRC) objectives, thus favoring translational research between the scientific environment of the laboratory and the clinical setting of health centers. In this article, we intend to review CIBERER's 15-year journey and summarize the main results obtained in terms of internationalization, scientific production, contributions toward the discovery of new therapies and novel genes associated to diseases, cooperation with patients' associations and many other topics related to RD research

Relationship of Weather Types on the Seasonal and Spatial Variability of Rainfall, Runoff, and Sediment Yield in the Western Mediterranean Basin

Rainfall is the key factor to understand soil erosion processes, mechanisms, and rates. Most research was conducted to determine rainfall characteristics and their relationship with soil erosion (erosivity) but there is little information about how atmospheric patterns control soil losses, and this is important to enable sustainable environmental planning and risk prevention. We investigated the temporal and spatial variability of the relationships of rainfall, runoff, and sediment yield with atmospheric patterns (weather types, WTs) in the western Mediterranean basin. For this purpose, we analyzed a large database of rainfall events collected between 1985 and 2015 in 46 experimental plots and catchments with the aim to: (i) evaluate seasonal differences in the contribution of rainfall, runoff, and sediment yield produced by the WTs; and (ii) to analyze the seasonal efficiency of the different WTs (relation frequency and magnitude) related to rainfall, runoff, and sediment yield. The results indicate two different temporal patterns: the first weather type exhibits (during the cold period: autumn and winter) westerly flows that produce the highest rainfall, runoff, and sediment yield values throughout the territory; the second weather type exhibits easterly flows that predominate during the warm period (spring and summer) and it is located on the Mediterranean coast of the Iberian Peninsula. However, the cyclonic situations present high frequency throughout the whole year with a large influence extended around the western Mediterranean basin. Contrary, the anticyclonic situations, despite of its high frequency, do not contribute significantly to the total rainfall, runoff, and sediment (showing the lowest efficiency) because of atmospheric stability that currently characterize this atmospheric pattern. Our approach helps to better understand the relationship of WTs on the seasonal and spatial variability of rainfall, runoff and sediment yield with a regional scale based on the large dataset and number of soil erosion experimental stations

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries