64 research outputs found
Grafted ionomer complexes and their effect on protein adsorption on silica and polysulfone surfaces
We have studied the formation and the stability of ionomer complexes from grafted copolymers (GICs) in solution and the influence of GIC coatings on the adsorption of the proteins β-lactoglobulin (β-lac), bovine serum albumin (BSA), and lysozyme (Lsz) on silica and polysulfone. The GICs consist of the grafted copolymer PAA28-co-PAPEO22 {poly(acrylic acid)-co-poly[acrylate methoxy poly(ethylene oxide)]} with negatively charged AA and neutral APEO groups, and the positively charged homopolymers: P2MVPI43 [poly(N-methyl 2-vinyl pyridinium iodide)] and PAH∙HCl160 [poly(allylamine hydrochloride)]. In solution, these aggregates are characterized by means of dynamic and static light scattering. They appear to be assemblies with hydrodynamic radii of 8 nm (GIC-PAPEO22/P2MVPI43) and 22 nm (GIC-PAPEO22/PAH∙HCl160), respectively. The GICs partly disintegrate in solution at salt concentrations above 10 mM NaCl. Adsorption of GICs and proteins has been studied with fixed angle optical reflectometry at salt concentrations ranging from 1 to 50 mM NaCl. Adsorption of GICs results in high density PEO side chains on the surface. Higher densities were obtained for GICs consisting of PAH∙HCl160 (1.6 ÷ 1.9 chains/nm2) than of P2MVPI43 (0.6 ÷ 1.5 chains/nm2). Both GIC coatings strongly suppress adsorption of all proteins on silica (>90%); however, reduction of protein adsorption on polysulfone depends on the composition of the coating and the type of protein. We observed a moderate reduction of β-lac and Lsz adsorption (>60%). Adsorption of BSA on the GIC-PAPEO22/P2MVPI43 coating is moderately reduced, but on the GIC-PAPEO22/PAH∙HCl160 coating it is enhanced
Seismic resistance of traditional timber-frame hımış
Hımış structures have hardly ever found as extensive a role as other traditional timber housing, such as those originating from Japan or Central Europe, within the wide discourse on the seismic performance of timber-frame architecture that has gained significant momentum in the last few decades owing to advancing testing technologies. While the hımış construction technique was perhaps not born as a result of a conscious search for a seismically resistant building form, it was soon widely appreciated for its structural features advantageous under seismic loading - especially from the sixteenth century when it has become a well-established construction technique in part of the Balkans and in today’s Turkey. Despite widely available anecdotal information based on post-disaster studies regarding its performance under earthquakes, robust quantitative data on the seismic behaviour of these structures were practically non-existent until quite recently, and are still somewhat limited. However, we are now able to confirm that hımış constructions do have intrinsic qualities that are very beneficial under seismic action. This paper aims to make a brief review of the current state of our knowledge on structural performance of hımış buildings under earthquake loading, with specific emphasis on infill/cladding techniques, connection details and energy dissipation characteristics
Crystallization kinetics, polymorphism fine tuning, and rigid amorphous fraction of poly(vinylidene fluoride) blends
Fast scanning calorimetry (FSC) is used to study crystallization of poly(vinylidene fluoride) (PVDF), and its blends with a random fluorinated copolymer (FCP) of poly(methyl methacrylate) and 1H,1H,2H,2H-perfluorodecyl methacrylate (PMMA-r-PFDMA). By varying the residence time at isothermal melt crystallization temperatures TMC = 80–120°C, the amount of α- and β-phase can be controlled, yielding partial or complete suppression of β-phase for all blends studied. Nonisothermal crystallization kinetics are also studied by FSC and analyzed using the Mo model. Crystallization rates increase when FCP is present. PVDF crystallizes into β-phase when cooled from the melt at rates faster than 3000 K/s giving PVDF crystal fractions of about 0.05–0.16. Only α-phase occurs at cooling rates slower than 2000 K/s yielding larger PVDF crystal fractions of about 0.30–0.43. Cooling rates between those limits result in mixed α- and β-phase. The rigid amorphous fraction (RAF) of PVDF varies with α and β crystal fraction in PVDF/FCP blends. RAF of α-phase PVDF ranges from 0.21 to 0.28 whereas RAF of β-phase PVDF spans a wider range, reaching values from 0.42 to 0.46
Glass-Forming Ability of Polyzwitterions
The glass-forming ability of a series of specially synthesized polyzwitterions was studied using fast scanning calorimetry (FSC). Polyzwitterions include those based on the sulfobetaine moiety: sulfobetaine acrylate, ethyl sulfobetaine methacrylate, sulfobetaine vinylimidazole, sulfobetaine 4-vinylpyridine, sulfobetaine methacrylate, and sulfobetaine methacrylamide. FSC was used to investigate the dynamic fragility over a large range of cooling rates, 10-4000 K/s, minimizing thermal degradation of the polyzwitterions. The rate dependence of the limiting fictive temperatures (Tf) was measured and fit to the Williams-Landel-Ferry model, from which the polyzwitterion dynamic fragility was determined for the first time. Dynamic fragility was low, ranging from 41 to 110, depending on the underlying chemical structure, which allows classification of this series of polyzwitterions as moderate to relatively strong polymeric glass formers. Their high glass transition temperatures combined with low fragilities indicates that polyzwitterions are unique among polymeric glass formers. This behavior arises from the formation of inter- and intrachain dipole-dipole cross-links which causes more dense molecular packing and cohesion
Laboratory efficacy of locally available backwashing methods at removing fouling in hollow-fiber membrane filters used for household water treatment
Hollow-fiber membrane filters (HFMFs) for household water treatment (HWT) can effi-caciously remove disease-causing organisms in laboratory settings. However, lower effectiveness in use in low-and middle-income countries (LMICs) and humanitarian contexts (HCs) has been observed and attributed to membrane fouling and the associated cleaning. In LMICs/HCs, it is not possible to prevent and control fouling using commonly known methods (e.g., testing influent water, maintenance regimes), and the literature on fouling/cleaning of HFMFs distributed in LMICs is scarce. As such, controlled laboratory experiments were conducted to determine the efficacy of locally available (in LMICs/HCs) backwashing solutions at removing fouling using different influent waters and HFMF types. Four commonly distributed HFMFs were selected; fouling layers were developed by filtering three influent water compositions, representing LMIC/HC waters, for 10-days, and bleach, water, or vinegar backwashing solutions were used for daily backwashing. Filter performance indicators included: fiber mechanical properties (strain at break, break force), water quantity performance (flow), water quality performance (turbidity, E. coli), and imaging. The study found fouling developed rapidly and altered mechanical properties and water quantity indicators within 200 h of filtration. Fouling did not decrease water quality indicators. Backwashing improved the filter’s mechanical properties and water quantity performance, but it did not fully recover the initial performance. Additionally, recovery differed between backwashing solutions, and no universal cleaning recommendation appropriate for HFMFs in LMICs/HCs was identified. Overall, fouling development and control depended on HFMF type, influent water quality, and backwashing solution type; thus, caution before distributing HFMFs for long-term use in LMICs/HCs is recommended
EFFICIENCY OF OIL REMOVAL FROM REAL STORM WATER WITH DIFFERENT SORBENTS / NAFTOS PRODUKTŲ ŠALINIMO IŠ PAVIRŠINIŲ NUOTEKŲ EFEKTYVUMAS NAUDOJANT SKIRTINGUS SORBENTUS
Suspended solids and oil products are considered as the most important pollutants in storm water. Surface water flow and changes in pollutant concentration complicate conventional matching techniques and prolong the duration of technological processes; therefore, a comprehensive study on this area is necessary. For this reason, the research and analysis of three different sorbents (“FIBROIL®”, “Duck”, “Reo-dry”) were performed in the laboratory. According to the results of the conducted experiment, all three sorbents have similar treatment efficiency: “FIBROIL®” – 99%, “Reo-dry” – 95%, “Duck” – 98%. Filtering rate had an influence on the effectiveness of removing petrol products (slower speed increases effectiveness).
Santrauka
Didžiausiais paviršinių nuotekų teršalais laikomi naftos produktai ir skendinčiosios medžiagos. Vienas iš efektyviausių naftos produktų šalinimo iš nuotekų būdų yra filtravimas pro sorbuojančiosios medžiagos filtrą. Paviršinių nuotekų tekėjimas ir teršalų koncentracijų kaita apsunkina įprastinių technologijų suderinamumą, pailgina technologinių procesų trukmės laiką, todėl yra būtini šios srities išsamūs tyrimai. Šiame darbe buvo atliktas trijų skirtingų sorbentų (,,FIBROIL®“, „Duck“, „Reo-dry“) šalinant iš paviršinių nuotekų naftos produktus eksperimentinis efektyvumo tyrimas. Atlikus bandymus laboratoriniame stende, nustatyta, kad visų trijų sorbentų efektyvumas, šalinant naftos produktus, panašus: ,,FIBROIL®“ – 99 %, ,,Reo-dry“ – 95 %, ,,Duck“ – 98 %. Naftos produktų šalinimo efektyvumą veikė filtravimo greitis (kuo mažesnis greitis, tuo didesnis efektyvumas).
Raktiniai žodžiai: paviršinės nuotekos; naftos produktai; skendinčiosios medžiagos; sorbentai; filtravimas
Existential Antagonisms: Boundary Work and the Professional Ideology of Turkish Industrial Designers
Supramolecular hybrid hydrogels as rapidly on-demand dissoluble, self-healing, and biocompatible burn dressings
Despite decades of efforts, state-of-the-art synthetic burn dressings to treat partial-thickness burns are still far from ideal. Current dressings adhere to the wound and necessitate debridement. This work describes the first “supramolecular hybrid hydrogel (SHH)” burn dressing that is biocompatible, self-healable, and on-demand dissoluble for easy and trauma-free removal, prepared by a simple, fast, and scalable method. These SHHs leverage the interactions of a custom-designed cationic copolymer via host-guest chemistry with cucurbit[7]uril and electrostatic interactions with clay nanosheets coated with an anionic polymer to achieve enhanced mechanical properties and fast on-demand dissolution. The SHHs show high mechanical strength (>50 kPa), self-heal rapidly in ∼1 min, and dissolve quickly (4–6 min) using an amantadine hydrochloride (AH) solution that breaks the supramolecular interactions in the SHHs. Neither the SHHs nor the AH solution has any adverse effects on human dermal fibroblasts or epidermal keratinocytes in vitro. The SHHs also do not elicit any significant cytokine response in vitro. Furthermore, in vivo murine experiments show no immune or inflammatory cell infiltration in the subcutaneous tissue and no change in circulatory cytokines compared to sham controls. Thus, these SHHs present excellent burn dressing candidates to reduce the time of pain and time associated with dressing changes
- …