Noninfectious complications of acute stroke and their impact on hospital mortality in patients admitted to a stroke unit in Warsaw from 1995 to 2015

Background Medical complications often worsen the prognosis after stroke. Our aim was to investigate the association between particular noninfectious complications and hospital mortality of acute stroke patients admitted to an urban Polish stroke center, and changes in their occurrence from 1995 to 2015. Methods This is a retrospective analysis of 5174 consecutive patients admitted for acute ischemic stroke or cerebral hemorrhage to a Polish urban stroke center between 1995 and 2015. The occurrence of complications was reported for years 1995–2000 (n=883), 2001–2006 (n=1567), 2006–2010 (n=1539) and 2011–2015 (n=1183). Odds ratios (OR) with 95% confidence interval (95% CI) for stroke unit death were calculated after adjustment for age, congestive heart failure (CHF), pre-existing disability, stroke type and baseline neurological deficit in three different time periods. Results Over time there was a significant decrease in the occurrence of myocardial infarction (MI) (2.2%, 1.4%, 1.0% and 0.3%, respectively), exacerbated CHF (4.6%, 5.1%, 2.6% and 2.0%) and deep vein thrombosis (DVT) (4.6%, 2.7%, 1.2% and 1.1%). Adjusted odds for stroke unit death were increased by myocardial infarction (MI) (OR 17.5, 95% CI: 8.5–35.7), exacerbated CHF (OR 15.0, 95% CI: 9.8–23.0), pulmonary embolism (PE) (OR 11.5, 95% CI: 6.1–21.6), gastrointestinal bleeding (OR 9.2, 95% CI: 4.4–18.9) and recurrent stroke (OR 5.4, 95% CI: 3.1–9.3). Conclusions Over the last two decades Polish urban stroke units may have achieved a significant reduction of the occurrence of some noninfectious complications (i.e. MI, exacerbated CHF and DVT). However, the list of conditions associated with stroke unit mortality includes not only MI and exacerbated CHF but also PE, gastrointestinal bleeding and recurrent stroke

Effect of accelerated electron beam on mechanical properties of human cortical bone: influence of different processing methods

Accelerated electron beam (EB) irradiation has been a sufficient method used for sterilisation of human tissue grafts for many years in a number of tissue banks. Accelerated EB, in contrast to more often used gamma photons, is a form of ionizing radiation that is characterized by lower penetration, however it is more effective in producing ionisation and to reach the same level of sterility, the exposition time of irradiated product is shorter. There are several factors, including dose and temperature of irradiation, processing conditions, as well as source of irradiation that may influence mechanical properties of a bone graft. The purpose of this study was to evaluate the effect e-beam irradiation with doses of 25 or 35 kGy, performed on dry ice or at ambient temperature, on mechanical properties of non-defatted or defatted compact bone grafts. Left and right femurs from six male cadaveric donors, aged from 46 to 54 years, were transversely cut into slices of 10 mm height, parallel to the longitudinal axis of the bone. Compact bone rings were assigned to the eight experimental groups according to the different processing method (defatted or non-defatted), as well as e-beam irradiation dose (25 or 35 kGy) and temperature conditions of irradiation (ambient temperature or dry ice). Axial compression testing was performed with a material testing machine. Results obtained for elastic and plastic regions of stress–strain curves examined by univariate analysis are described. Based on multivariate analysis, including all groups, it was found that temperature of e-beam irradiation and defatting had no consistent significant effect on evaluated mechanical parameters of compact bone rings. In contrast, irradiation with both doses significantly decreased the ultimate strain and its derivative toughness, while not affecting the ultimate stress (bone strength). As no deterioration of mechanical properties was observed in the elastic region, the reduction of the energy absorption capacity of irradiated bone rings apparently resulted from changes generated by irradiation within the plastic strain region

A global analysis of Y-chromosomal haplotype diversity for 23 STR loci

In a worldwide collaborative effort, 19,630 Y-chromosomes were sampled from 129 different populations in 51 countries. These chromosomes were typed for 23 short-tandem repeat (STR) loci (DYS19, DYS389I, DYS389II, DYS390, DYS391, DYS392, DYS393, DYS385ab, DYS437, DYS438, DYS439, DYS448, DYS456, DYS458, DYS635, GATAH4, DYS481, DYS533, DYS549, DYS570, DYS576, and DYS643) and using the PowerPlex Y23 System (PPY23, Promega Corporation, Madison, WI). Locus-specific allelic spectra of these markers were determined and a consistently high level of allelic diversity was observed. A considerable number of null, duplicate and off-ladder alleles were revealed. Standard single-locus and haplotype-based parameters were calculated and compared between subsets of Y-STR markers established for forensic casework. The PPY23 marker set provides substantially stronger discriminatory power than other available kits but at the same time reveals the same general patterns of population structure as other marker sets. A strong correlation was observed between the number of Y-STRs included in a marker set and some of the forensic parameters under study. Interestingly a weak but consistent trend toward smaller genetic distances resulting from larger numbers of markers became apparent.Peer reviewe

Hem12, an enzyme of heme biosynthesis pathway, is monoubiquitinated by Rsp5 ubiquitin ligase in yeast cells.

Heme biosynthesis pathway is conserved in yeast and humans and hem12 yeast mutants mimic porphyria cutanea tarda (PCT), a hereditary human disease caused by mutations in the UROD gene. Even though mutations in other genes also affect UROD activity and predispose to sporadic PCT, the regulation of UROD is unknown. Here, we used yeast as a model to study regulation of Hem12 by ubiquitination and involvement of Rsp5 ubiquitin ligase in this process. We found that Hem12 is monoubiquitinated in vivo by Rsp5. Hem12 contains three conserved lysine residues located on the protein surface that can potentially be ubiquitinated and lysine K8 is close to the 36-LPEY-39 (PY) motif which binds WW domains of the Rsp5 ligase. The hem12-K8A mutation results in a defect in cell growth on a glycerol medium at 38oC but it does not affect the level of Hem12. The hem12-L36A,P37A mutations which destroy the PY motif result in a more profound growth defect on both, glycerol and glucose-containing media. However, after several passages on the glucose medium, the hem12-L36A,P37A cells adapt to the growth medium owing to higher expression of hem12-L36A,P37A gene and higher stability of the mutant Hem12-L36A,P37A protein. The Hem12 protein is downregulated upon heat stress in a Rsp5-independent way. Thus, Rsp5-dependent Hem12 monoubiquitination is important for its functioning, but not required for its degradation. Since Rsp5 has homologs among the Nedd4 family of ubiquitin ligases in humans, a similar regulation by ubiquitination might be also important for functioning of the human UROD

Assessment of the Susceptibility of Aesthetic Orthodontic Brackets to Discoloration

The high aesthetic value of orthodontic appliance elements during treatment constitutes an important factor for an increasing number of adult patients. The aim of this study was to determine whether food dyes could significantly affect the color of both plastic and ceramic orthodontic brackets. Four brands of orthodontic brackets were investigated in the present study. Twenty-five samples of each kind were prepared. Five brackets of each series were stored in pure water, coffee, black tea and red wine for 1 h, 24 h, 7 days and 14 days. Total color change ΔE* of the samples was analyzed after storage with the use of the SpectroShade dental spectrophotometer (MHT, Verona, Italy) according to the CIE L*a*b* color scale. Correlations between bracket brand, kind of food dye and intensity of color change at the significance level p = 0.05 were investigated. After 1 and 24 h of incubation, water had the least influence on the color change of aesthetic orthodontic brackets, and tea had the greatest effect (p = 0.05). After 7 and 14 days of incubation of the samples, water still remained the environment influencing ΔE* change to the smallest extent, whereas storage in red wine changed the color of brackets to the significantly (p = 0.05) highest degree. The degree of discoloration of the assessed brackets depended on the type of material and the storage time in the environment of the individual food dyes (p = 0.05). The results of the present study show that, in the event of contact with food dyes, aesthetic orthodontic brackets discolor, the intensity of which can be influenced by the materials they are made of, the kind of food dye and the time of samples’ storage

Study of Stem Cells Influence on Cardiac Cells Cultured with a Cyanide-P-Trifluoromethoxyphenylhydrazone in Organ-on-a-Chip System

Regenerative medicine and stem cells could prove to be an effective solution to the problem of treating heart failure caused by ischemic heart disease. However, further studies on the understanding of the processes which occur during the regeneration of damaged tissue are needed. Microfluidic systems, which provide conditions similar to in vivo, could be useful tools for the development of new therapies using stem cells. We investigated how mesenchymal stem cells (MSCs) affect the metabolic activity of cardiac cells (rat cardiomyoblasts and human cardiomyocytes) incubated with a potent uncoupler of mitochondrial oxidative phosphorylation under microfluidic conditions. A cyanide p-trifluoromethoxyphenylhydrazone (FCCP) was used to mimic disfunctions of mitochondria of cardiac cells. The study was performed in a microfluidic system integrated with nanofiber mats made of poly-l-lactid acid (PLLA) or polyurethane (PU). The microsystem geometry allows four different cell cultures to be conducted under different conditions (which we called: normal, abnormal—as both a mono- and co-culture). Metabolic activity of the cells, based on the bioluminescence assay, was assessed in the culture’s performed in the microsystem. It was proved that stem cells increased metabolic activity of cardiac cells maintained with FCCP

Silk as an innovative biomaterial for cancer therapy

Silk has been used for centuries in the textile industry and as surgical sutures. In addition to its unique mechanical properties, silk possesses other properties, such as biocompatibility, biodegradability and ability to self-assemble, which make it an interesting material for biomedical applications. Although silk forms only fibers in nature, synthetic techniques can be used to control the processing of silk into different morphologies, such as scaffolds, films, hydrogels, microcapsules, and micro- and nanospheres. Moreover, the biotechnological production of silk proteins broadens the potential applications of silk. Synthetic silk genes have been designed. Genetic engineering enables modification of silk properties or the construction of a hybrid silk. Bioengineered hybrid silks consist of a silk sequence that self-assembles into the desired morphological structure and the sequence of a polypeptide that confers a function to the silk biomaterial. The functional domains can comprise binding sites for receptors, enzymes, drugs, metals or sugars, among others. Here, we review the current status of potential applications of silk biomaterials in the field of oncology with a focus on the generation of implantable, injectable and targeted drug delivery systems and the three-dimensional cancer models based on silk scaffolds for cancer research. However, the systems described could be applied in many biomedical fields