Mg(2)Si(x)Sn(1-x)heterostructures on Si(111) substrate for optoelectronics and thermoelectronics

Thin (50-90 m) non-doped and doped (by Al atoms) Mg2Sn0.6Si0.4 and Mg(2)Sn(0.4)Si(0.6)films with roughness of 1.9-3.7 nm have been grown by multiple deposition and single annealing at 150 degrees C of multilayers formed by repetition deposition of three-layers (Si-Sn-Mg) on Si(111) p-type wafers with 45 cm resistivity. Transmission electron microscopy has shown that the first forming layer is an epitaxial layer of hex-Mg2Sn(300) on Si(111) substrate with thickness not more than 5-7 nm. Epitaxial relationships: hex-Mg2Sn(300)parallel to Si(111), hex-Mg2Sn[001]parallel to Si[-112] and hex-Mg2Sn[030]parallel to Si[110] have been found for the epitaxial layer. But inclusions of cub-Mg2Si were also observed inside hex-Mg2Sn layer. It was found that the remaining part of the film thickness is in amorphous state and has a layered distribution of major elements: Mg, Sn and Mg without exact chemical composition. It was established by optical spectroscopy data that both type films are semiconductor with undispersed region lower 0.18 eV with n(o) = 3.59 +/- 0.01, but only two direct interband transitions with energies 0.75-0.76 eV and 1.2 eV have been determined. The last interband transition has been confirmed by photoreflectance data at room temperature. Fourier transmittance spectroscopy and Raman spectroscopy data have established the formation of stannide, silicide and ternary compositions

Andreev reflection in the fractional quantum Hall effect

We study the reflection of electrons and quasiparticles on point-contact interfaces between fractional quantum Hall (FQH) states and normal metals (leads), as well as interfaces between two FQH states with mismatched filling fractions. We classify the processes taking place at the interface in the strong coupling limit. In this regime a set of quasiparticles can decay into quasiholes on the FQH side and charge excitations on the other side of the junction. This process is analogous to an Andreev reflection in normal-metal/superconductor (N-S) interfaces.Comment: 10 pages, 5 embedded EPS figures. Final version as published in Phys. Rev. B 56, 2012 (1997

The ALICE experiment at the CERN LHC

ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries. Its overall dimensions are 161626 m3 with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008

ALICE A Large Ion Collider Experiment

POLAR-2 is a follow-up GRB mission of POLAR, which has observed low levels of polarization degree and a temporal evolution of the polarization angle, indicating that time resolved studies of $\gamma$ photons polarization are required to constrain theoretical emission models of GRB’s. POLAR-2 detector aim to put in space a detector with one order of magnitude sensitivity improvement versus POLAR. POLAR-2 will be the most sensitive GRB detector covering half of the sky. The instrument, proposed by an international collaboration, was selected to be launched in 2024 to the China Space Station and operate for at least 2 years. POLAR-2 will use same plastic bar concept then POLAR but will be readout by SiPMT. The payload will also feature a spectrometer. The instrument is foreseen to perform detailed polarization measurements of at least 100 GRBs

Technical Design Report for the Upgrade of the ALICE Inner Tracking System

ALICE (A Large Ion Collider Experiment) is studying the physics of strongly interacting matter, and in particular the properties of the Quark–Gluon Plasma (QGP), using proton–proton, proton–nucleus and nucleus–nucleus collisions at the CERN LHC (Large Hadron Collider). The ALICE Collaboration is preparing a major upgrade of the experimental apparatus, planned for installation in the second long LHC shutdown in the years 2018–2019. A key element of the ALICE upgrade is the construction of a new, ultra-light, high-resolution Inner Tracking System (ITS) based on monolithic CMOS pixel detectors. The primary focus of the ITS upgrade is on improving the performance for detection of heavy-flavour hadrons, and of thermal photons and low-mass di-electrons emitted by the QGP. With respect to the current detector, the new Inner Tracking System will significantly enhance the determination of the distance of closest approach to the primary vertex, the tracking efficiency at low transverse momenta, and the read-out rate capabilities. This will be obtained by seven concentric detector layers based on a 50 μm thick CMOS pixel sensor with a pixel pitch of about 30×30 μm2. This document, submitted to the LHCC (LHC experiments Committee) in September 2013, presents the design goals, a summary of the R&D activities, with focus on the technical implementation of the main detector components, and the projected detector and physics performance