48 research outputs found

    Body Size Measurements as Predictors of Type 2 Diabetes in Aboriginal People

    Get PDF
    OBJECTIVE: To investigate waist circumference, waist-to-hip ratio, body mass index (BMI), weight and hip circumference as risk factors for type 2 diabetes in Aboriginal Australians. DESIGN: Community-based cross-sectional study. SUBJECTS: In total, 915 Australian Aboriginal adults (age: 18-74 y) from a remote Aboriginal community in the Northern Territory of Australia. MEASUREMENTS: Body size measurements included waist circumference, waist-to-hip ratio, BMI, weight and hip circumference. Diabetes status was determined according to medical history and fasting and 2-h postload plasma glucose values. Logistic regression was used to calculate odds ratio for diabetes associated with 1 standard deviation (s.d.) increase in a body size measurement. The areas under the ROC curves of five body size measurements were calculated and compared. RESULTS: Risk of diabetes increased with increasing levels of body size. ORs (95% CI) for diabetes with adjustment for age and sex were 2.16 (1.75, 2.66), 1.80 (1.49, 2.17), 1.41 (1.17, 1.71), 1.81 (1.51, 2.19) and 1.84 (1.50, 2.24) associated with 1 s.d. increase in waist circumference, BMI, weight, waist-to-hip ratio, and hip circumference, respectively. The area under the ROC curve for waist circumference was significantly higher than those for other measurements. CONCLUSION: Waist circumference is the best body size measurement in predicting diabetes in Aboriginal people

    Determinants of male reproductive health disorders: the Men in Australia Telephone Survey (MATeS)

    Get PDF
    Background: The relationship between reproductive health disorders and lifestyle factors in middle-aged and older men is not clear. The aim of this study is to describe lifestyle and biomedical associations as possible causes of erectile dysfunction (ED), prostate disease (PD), lower urinary tract symptoms (LUTS) and perceived symptoms of androgen deficiency (pAD) in a representative population of middle-aged and older men, using the Men in Australia Telephone Survey (MATeS). Methods: A representative sample (n = 5990) of men aged 40+ years, stratified by age and State, was contacted by random selection of households, with an individual response rate of 78%. All men participated in a 20-minute computer-assisted telephone interview exploring general and reproductive health. Associations between male reproductive health disorders and lifestyle and biomedical factors were analysed using multivariate logistic regression (odds ratio [95% confidence interval]). Variables studied included age, body mass index, waist circumference, smoking, alcohol consumption, physical activity, co-morbid disease and medication use for hypertension, high cholesterol and symptoms of depression. Results: Controlling for age and a range of lifestyle and co-morbid exposures, sedentary lifestyle and being underweight was associated with an increased likelihood of ED (1.4 [1.1-1.8]; 2.9 [1.5-5.8], respectively) and pAD (1.3 [1.1-1.7]; 2.7 [1.4-5.0], respectively. Diabetes and cardiovascular disease were both associated with ED, with hypertension strongly associated with LUTS and pAD. Current smoking (inverse association) and depressive symptomatology were the only variables independently associated with PD. All reproductive disorders showed consistent associations with depression (measured either by depressive symptomatology or medication use) in both age-adjusted and multivariate analyses. Conclusion: A range of lifestyle factors, more often associated with chronic disease, were significantly associated with male reproductive health disorders. Education strategies directed to improving general health may also confer benefits to male reproductive health.Carol A. Holden, Robert I. McLachlan, Marian Pitts, Robert Cumming, Gary Wittert, Johnathon P. Ehsani, David M. de Kretser, David J. Handelsma

    A Linear Framework for Time-Scale Separation in Nonlinear Biochemical Systems

    Get PDF
    Cellular physiology is implemented by formidably complex biochemical systems with highly nonlinear dynamics, presenting a challenge for both experiment and theory. Time-scale separation has been one of the few theoretical methods for distilling general principles from such complexity. It has provided essential insights in areas such as enzyme kinetics, allosteric enzymes, G-protein coupled receptors, ion channels, gene regulation and post-translational modification. In each case, internal molecular complexity has been eliminated, leading to rational algebraic expressions among the remaining components. This has yielded familiar formulas such as those of Michaelis-Menten in enzyme kinetics, Monod-Wyman-Changeux in allostery and Ackers-Johnson-Shea in gene regulation. Here we show that these calculations are all instances of a single graph-theoretic framework. Despite the biochemical nonlinearity to which it is applied, this framework is entirely linear, yet requires no approximation. We show that elimination of internal complexity is feasible when the relevant graph is strongly connected. The framework provides a new methodology with the potential to subdue combinatorial explosion at the molecular level

    Climate simulations for 1880-2003 with GISS modelE

    Get PDF
    We carry out climate simulations for 1880-2003 with GISS modelE driven by ten measured or estimated climate forcings. An ensemble of climate model runs is carried out for each forcing acting individually and for all forcing mechanisms acting together. We compare side-by-side simulated climate change for each forcing, all forcings, observations, unforced variability among model ensemble members, and, if available, observed variability. Discrepancies between observations and simulations with all forcings are due to model deficiencies, inaccurate or incomplete forcings, and imperfect observations. Although there are notable discrepancies between model and observations, the fidelity is sufficient to encourage use of the model for simulations of future climate change. By using a fixed well-documented model and accurately defining the 1880-2003 forcings, we aim to provide a benchmark against which the effect of improvements in the model, climate forcings, and observations can be tested. Principal model deficiencies include unrealistically weak tropical El Nino-like variability and a poor distribution of sea ice, with too much sea ice in the Northern Hemisphere and too little in the Southern Hemisphere. The greatest uncertainties in the forcings are the temporal and spatial variations of anthropogenic aerosols and their indirect effects on clouds.Comment: 44 pages; 19 figures; Final text accepted by Climate Dynamic

    On the 4-D consistency of satellite wind products for regional NWP data assimilation

    No full text
    2019 Joint Satellite Conference, 28 September - 4 October 2019, BostonThe resolution of regional numerical weather prediction (NWP) models has continuously been increased over the past decades, in part, thanks to the improved computational capabilities. At such small scales, the fast weather evolution is driven by wind rather than by temperature and pressure. Over the ocean, where global NWP models are not able to resolve wind scales below 150 km, regional models provide wind dynamics and variance equivalent to 25 km or lower. However, although this variance is realistic, it often results in spurious circulation (e.g., moist convection systems), thus misleading weather forecasts and interpretation. An accurate and consistent initialization of the evolution of the 3-dimensional (3-D) wind structure is therefore essential in regional weather analysis. The research will focus on a comprehensive characterization of the spatial scales and measurement errors for the different operational space-borne wind products currently used and/or planned to be used in regional models. In addition, a thorough investigation and improvement of the 4-D (including time) consistency between different horizontal and/or vertical satellite wind products will be carried out. Such products include OSI SAF scatterometer-derived sea-surface wind fields, NWC SAF Atmospheric Motion Vectors (AMVs), the recently launched ADM-Aeolus and/or IASI wind profiles. Densely sampled aircraft wind profiles (Mode-S) will be used to verify and characterize the satellite products. To this end, the experience of the NWC, OSI, and NWP SAFs will be exploited. Moreover, data assimilation experiments of the consistent datasets into the Harmonie-AROME regional model will be carried out in two different regions, i.e., the Netherlands and the Iberian Peninsula regional configuration

    Time trends (1993-1997) and seasonal variation in body mass index and waist circumference in the Netherlands

    No full text
    OBJECTIVE: To compare the time trend and seasonal variation in body mass index (BMI) and waist circumference. DESIGN: Continuous monitoring health survey carried out between 1 June 1993 and 31 May 1997. SUBJECTS: A total of 8,186 men and 9,638 women aged 20-59 y from three towns in the Netherlands. MEASUREMENTS: BMI and waist circumference. Obesity was defined as BMI > or =30 kg/m(2), abdominal obesity as waist circumference > or =102 cm for men and > or =88 cm for women. RESULTS: Levels of BMI and waist circumference increased between 1 June 1993 and 31 May 1997. Among women, the time trend in abdominal obesity was stronger than that in obesity. Further, levels of BMI and waist circumference were higher in winter than in summer seasons. The seasonal variation was larger for abdominal obesity than for obesity, among both men and women. CONCLUSIONS: The time trend in women and the seasonal differences in both men and women were stronger for abdominal obesity than for obesity. Surveys on BMI and waist circumference are only comparable if season is taken into account. Furthermore, the waist circumference is a more sensitive indicator of variations in lifestyle and body composition than is body mass index

    Microleakage of glass ionomer formulations after erbium:yttrium-aluminium-garnet laser preparation.

    No full text
    The aim of this study was to investigate the microleakage in class V cavities restored with four conventionally setting glass ionomers (CGIs) and one resin-modified glass ionomer (RMGI) following erbium:yttrium-aluminium-garnet (Er:YAG) laser or conventional preparation. Four hundred class V cavities were assigned to four groups: A and B were prepared by an Er:YAG laser; C and D were conventionally prepared. In groups B and D, the surface was additionally conditioned with Ketac conditioner. Each group was divided into five subgroups according to the glass ionomer cement (GIC) used: groups 1 (Ketac Fil), 2 (Ketac Molar), 3 (Ionofil Molar), 4 (Ionofil Molar Quick) and 5 (Photac Fil Quick). After thermocycling, a 2% methylene blue solution was used as dye. Scanning electron microscope (SEM) photographs were taken to show the conditioner's effect. Complete marginal sealing could not be reached. PhotacFil showed less microleakage than the conventionally setting glass ionomer cements (CGICs) investigated. Conditioning laser-prepared cavities did not negatively influence microleakage results except for Ionofil Molar Quick
    corecore