214 research outputs found
An investigation of volcanic depressions. Part 1: Airfall and intrusive pyroclastic deposits. Part 2: Subaerial pyroclastic flows and their deposits
Pyroclastic ejecta and the deposits they form were classified in many ways, and many interpretations were given to individual terms. Some classifications are based on the modes of orgin and deposition of the ejecta; others emphasized the chemical and physical composition of the ejecta. Particle-size was used as the prime basis of subdivision, and the same size-limits were used as those employed in the classification of sediments and sedimentary rocks
Testing of Milliwatt Power Source Components
A milliwatt power source (MPS) has been developed to satisfy the requirements of several potential solar system exploration missions. The MPS is a small power source consisting of three major components: a space qualified heat source (RHU), a thermopile (thermoelectric converter or TEC) and a container to direct the RHU heat to the TEC. Thermopiles from Hi-Z Technology, Inc. of San Diego and the Institute of Thermoelectricity of Chernivtsi Ukraine suitable for the MPS were tested and shown to perform as expected, producing 40 mW of power with a temperature difference of about 170°C. Such thermopiles were successfully life tested for up to a year. A MPS container designed and built by Swales Aerospace was tested with both a TEC simulator and actual TEC. The Swales unit, tested under dynamic vacuum, provided less temperature difference than anticipated, such that the TEC produced 20 mW of power with heat input equivalent to a RHU
A high-precision age estimate of the Holocene Plinian eruption of Mount Mazama, Oregon, USA
© The Author(s) 2015 The climactic eruption of Mount Mazama in Oregon, North America, resulted in the deposition of the most widespread Holocene tephra deposit in the conterminous United States and south-western Canada. The tephra forms an isochronous marker horizon for palaeoenvironmental, sedimentary and archaeological reconstructions, despite the current lack of a precise age estimate for the source eruption. Previous radiocarbon age estimates for the eruption have varied, and Greenland ice-core ages are in disagreement. For the Mazama tephra to be fully utilised in tephrochronology and palaeoenvironmental research, a refined (precise and accurate) age for the eruption is required. Here, we apply a meta-analysis of all previously published radiocarbon age estimations (n = 81), and perform Bayesian statistical modelling to this data set, to provide a refined age of 7682–7584 cal. yr BP (95.4% probability range). Although the depositional histories of the published ages vary, this estimate is consistent with that estimated from the GISP2 ice-core of 7627 ± 150 yr BP (Zdanowicz et al., 1999)
Recommended from our members
Petrology and Geochemistry of the Galápagos Islands : portrait of a pathological mantle plume
We report new major element, trace element, isotope ratio, and geochronological data on the Galapagos
Archipelago. Magmas erupted from the large western volcanos are generally moderately fractionated tholeiites of
uniform composition; those erupted on other islands are compositionally diverse, ranging from tholeiites to picritic
basanitoids. While these volcanoes do not form a strictly linear age progressive chain, the ages of the oldest dated flows
on any given volcano do form a reasonable progression from youngest in the west to oldest in the east, consistent with
motion of the Nazca plate with respect to the fixed hotspot reference frame. Isotope ratios in the Galapagos display a
considerable range, from values typical of mid-ocean ridge basalt on Genovesa (⁸⁷Sr/⁸⁶Sr: 0.70259, εNd: +9.4,
²⁰⁶Pb/²⁰⁴Pb: 18.44), to typical oceanic island values on Floreana (⁸⁷Sr/⁸⁶Sr: 0.70366, εNd: +5.2, ²⁰⁶Pb/²⁰⁴Pb: 20.0).
La/SmN ranges from 0.45 to 6.7; other incompatible element abundances and ratios show comparable ranges. Isotope
and incompatible element ratios define a horseshoe pattern with the most depleted signatures in the center of the
Galapagos Archipelago and the more enriched signatures on the eastern, northern, and southern periphery. These
isotope and incompatible element patterns appear to reflect thermal entrainment of asthenosphere by the Galapagos
plume as it experiences velocity shear in the uppermost asthenosphere. Both north-south heterogeneity within the
plume itself and regional variations in degree and depth of melting also affect magma compositions. Rare earth
systematics indicate that melting beneath the Galapagos begins in the garnet peridotite stability field, except beneath the
southern islands, where melting may occur entirely in the spinel peridotite stability field. The greatest degree of
melting occurs beneath the central western volcanos and decreases both to the east and to the north and south. Si₈.₀,
Fe₈.₀, and Na₈.₀, values are generally consistent with these inferences. This suggests that interaction between the plume
and surrounding asthenosphere results in significant cooling of the plume. Superimposed on this thermal pattern
produced by plume-asthenosphere interaction is a tendency for melting to be less extensive and to occur at shallower
depths to the south, presumably reflecting a decrease in ambient asthenospheric temperatures away from the Galapagos
Spreading Center.Copyrighted by American Geophysical Union
Recommended from our members
Rheology of magmas with bimodal crystal size and shape distributions: insights from analog experiments
Magmas in volcanic conduits commonly contain microlites in association with preexisting phenocrysts, as often indicated by volcanic rock textures. In this study, we present two different experiments that inves- tigate the flow behavior of these bidisperse systems. In the first experiments, rotational rheometric methods are used to determine the rheology of monodisperse and polydisperse suspensions consisting of smaller, prolate particles (microlites) and larger, equant particles (phenocrysts) in a bubble‐free Newtonian liquid (silicate melt). Our data show that increasing the relative proportion of prolate microlites to equant pheno- crysts in a magma at constant total particle content can increase the relative viscosity by up to three orders of magnitude. Consequently, the rheological effect of particles in magmas cannot be modeled by assuming a monodisperse population of particles. We propose a new model that uses interpolated parameters based on the relative proportions of small and large particles and produces a considerably improved fit to the data than earlier models. In a second series of experiments we investigate the textures produced by shearing bimodal suspensions in gradually solidifying epoxy resin in a concentric cylinder setup. The resulting textures show the prolate particles are aligned with the flow lines and spherical particles are found in well‐organized strings, with sphere‐depleted shear bands in high‐shear regions. These observations may explain the measured variation in the shear thinning and yield stress behavior with increasing solid fraction and particle aspect ratio. The implications for magma flow are discussed, and rheological results and tex- tural observations are compared with observations on natural samples
Shear-induced pressure changes and seepage phenomena in a deforming porous layer-I
We present a model for flow and seepage in a deforming, shear-dilatant sensitive porous layer that enables estimates of the excess pore fluid pressures and flow rates in both the melt and solid phase to be captured simultaneously as a function of stress rate. Calculations are relevant to crystallizing magma in the solidosity range 0.5–0.8 (50–20 per cent melt), corresponding to a dense region within the solidification front of a crystallizing magma chamber. Composition is expressed only through the viscosity of the fluid phase, making the model generally applicable to a wide range of magma types. A natural scaling emerges that allows results to be presented in non-dimensional form. We show that all length-scales can be expressed as fractions of the layer height H, timescales as fractions of H2(nβ'θ+ 1)/(θk) and pressures as fractions of . Taking as an example the permeability k in the mush of the order of magnitude 1015 m2 Pa1 s1, a layer thickness of tens of metres and a mush strength (θ) in the range 108–1012 Pa, an estimate of the consolidation time for near-incompressible fluids is of the order of 105–109 s. Using mush permeability as a proxy, we show that the greatest maximum excess pore pressures develop consistently in rhyolitic (high-viscosity) magmas at high rates of shear ( , implying that during deformation, the mechanical behaviour of basaltic and rhyolitic magmas will differ. Transport parameters of the granular framework including tortuosity and the ratio of grain size to layer thickness (a/H) will also exert a strong effect on the mechanical behaviour of the layer at a given rate of strain. For dilatant materials under shear, flow of melt into the granular layer is implied. Reduction in excess pore pressure sucks melt into the solidification front at a velocity proportional to the strain rate. For tectonic rates (generally 1014 s1), melt upwelling (or downwelling, if the layer is on the floor of the chamber) is of the order of cm yr1. At higher rates of loading comparable with emplacement of some magmatic intrusions (1010 s1), melt velocities may exceed effects due to instabilities resulting from local changes in density and composition. Such a flow carries particulates with it, and we speculate that these may become trapped in the granular layer depending on their sizes. If on further solidification the segregated grain size distribution of the particulates is frozen in the granular layer, structure formation including layering and grading may result. Finally, as the process settles down to a steady state, the pressure does not continue to decrease. We find no evidence for critical rheological thresholds, and the process is stable until so much shear has been applied that the granular medium fails, but there is no hydraulic failure
Gravity changes and passive SO2 degassing at the Masaya caldera complex, Nicaragua
An understanding of the mechanisms responsible for persistent volcanism can be acquired through the integration of geophysical and geochemical data sets. By interpreting data on micro-gravity, ground deformation and SO2 flux collected at Masaya Volcano since 1993, it is now clear that the characteristically cyclical nature of the activity is not driven by intrusion of additional magma into the system. Rather, it may be due in large part to the blocking and accumulation of gas by restrictions in the volcano substructure. The history of crater collapse and formation of caverns beneath the crater floor would greatly facilitate the trapping and storage of gas in a zone immediately beneath San Pedro and the other craters. Another mechanism that may explain the observed gravity and gas flux variations is the convective overturn of shallow, pre-existing, degassed, cooled, dense magma that is replaced periodically by lower density, hot, gas-rich magma from depth. Buoyant gas-rich magma rises from depth and is emplaced near the surface, resulting in the formation and fluctuation of a low-density gas-rich layer centred beneath Nindirí and Santiago craters. As this magma vigorously degasses, it must cool, increase in density and eventually sink. Five stages of activity have been identified at Masaya since 1853 and the most recent data suggest that the system may have been entering another period of reduced degassing in 2000. This type of analysis has important implications for hazard mitigation because periods of intense degassing are associated with poor agricultural yields and reduced quality of life. A better understanding of persistent cyclically active volcanoes will allow for more effective planning of urban development and agricultural land use
Geostationary Coastal and Air Pollution Events (GeoCAPE) Wide Angle Spectrometer (WAS)
The GeoCAPE Wide Angle Spectrometer (WAS) Study was a revisit of the COEDI Study from 2012. The customer primary goals were to keep mass, volume and cost to a minimum while meeting the science objectives and maximizing flight opportunities by fitting on the largest number of GEO accommodations possible. Riding on a commercial GEO satellite minimizes total mission costs. For this study, it is desired to increase the coverage rate,km2min, while maintaining ground sample size, 375m, and spectral resolution, 0.4-0.5nm native resolution. To be able to do this, the IFOV was significantly increased, hence the wide angle moniker. The field of view for COEDI was +0.6 degrees or (2048) 375m ground pixels. The WAS Threshold (the IDL study baseline design) is +2.4 degrees IDL study baseline design) is +2.4 degrees
The Masaya Triple Layer: a 2100 year old basaltic multi-episodic Plinian eruption from the Masaya Caldera Complex (Nicaragua)
The Masaya Caldera Complex has been the site of three highly explosive basaltic eruptions within the last six thousand years. A Plinian eruption ca. 2 ka ago formed the widespread deposits of the Masaya Triple Layer. We distinguish two facies within the Masaya Triple Layer from each other: La Concepción facies to the south and Managua facies to the northwest. These two facies were previously treated as two separated deposits (La Concepción Tephra and the Masaya Triple Layer of Pérez and Freundt, 2006) because of their distinct regional distribution and internal architectures. However, chemical compositions of bulk rock, matrix and inclusion glasses and mineral phases demonstrate that they are the product of a single basaltic magma batch. Additionally, a marker bed containing fluidal-shaped vesicular lapilli allowed us to make a plausible correlation between the two facies, also supported by consistent lateral changes in lithologic structure and composition, thickness and grain size.
We distinguish 10 main subunits of the Masaya Triple Layer (I to X), with bulk volumes ranging between 0.02 and 0.22 km3, adding up to 0.86 km3 (0.4 km3 DRE) for the entire deposit. Distal deposits identified in two cores drilled offshore Nicaragua, at a distance of ∼ 170 km from the Masaya Caldera Complex, increase the total tephra volume to 3.4 km3 or ∼ 1.8 km3 DRE of erupted basaltic magma.
Isopleth data of five major fallout subunits indicate mass discharges of 106 to 108 kg/s and eruption columns of 21 to 32 km height, affected by wind speeds of < 2 m/s to ∼ 20 m/s which increased during the course of the multi-episodic eruption. Magmatic Plinian events alternated with phreatoplinian eruptions and phreatomagmatic explosions generating surges that typically preceded breaks in activity. While single eruptive episodes lasted for few hours, the entire eruption probable lasted weeks to months. This is indicated by changes in atmospheric conditions and ash-layer surfaces that had become modified during the breaks in activity. The Masaya Triple Layer has allowed to reconstruct in detail how a basaltic Plinian eruption develops in terms of duration, episodicity, and variable access of external water to the conduit, with implications for volcanic hazard assessment
- …