The application of sediment fingerprinting to floodplain and lake sediment cores: assumptions and uncertainties evaluated through case studies in the Nene Basin, UK

Purpose: Fine sediment has been shown to be a major cause of the degradation of lakes and rivers and, as a result, research has been directed towards the understanding of fine sediment dynamics and the minimisation of sediment inputs. The use of tracers within a sediment fingerprinting framework has become a heavily used technique to investigate the sources of fine sediment pressures. When combined with the use of historically deposited sediment, the technique provides the opportunity to reconstruct past changes to the environment. However, alterations to tracer signatures during sediment transport and storage are a major potential source of uncertainty associated with tracer use. At present, few studies have quantified the uncertainties associated with tracer use. Materials and methods: This paper investigated uncertainty by determining the differences between sediment provenance predictions obtained using lithogenic radionuclide, geochemical and mineral magnetic signatures when fingerprinting lake and floodplain sedimentary deposits. It also investigated the potential causes of the observed differences. Results and discussion: A reservoir core was fingerprinted with the least uncertainty, with tracer group predictions ∼28 % apart and a consistent down-core trend in changing sediment provenance produced. When fingerprinting an on-line lake core and four floodplain cores, differences between tracer group predictions were as large as 100 %; the down-core trends in changing sediment provenance were also different. The differences between tracer group predictions could be attributed to the organic matter content and particle size of the sediment. There was also evidence of the in-growth of bacterially derived magnetite and chemical dissolution affecting the preservation of tracer signatures. Simple data corrections for sediment organic matter content and particle size did not result in significantly greater agreement between the predictions of the different tracer groups. Likewise, the inclusions of weightings for tracer discriminatory efficiency and within-source variability had minimal effects on the fingerprinting results. Conclusions: This paper highlights the importance of tracer selection and the consideration of recognising tracer non-conservatism when using lake and floodplain sediment deposits to reconstruct anthropogenic changes to the environment and changing sediment dynamics. It was recommended that future research focus on the assessment of uncertainty using the artificial mixing of sediment source samples, the limitation of the fingerprinting to narrow particle size fractions and the development of specific particle size and organic matter correction factors for each tracer

A review of source tracking techniques for fine sediment within a catchment

Excessive transport of fine sediment, and its associated pollutants, can cause detrimental impacts in aquatic environments. It is therefore important to perform accurate sediment source apportionment to identify hot spots of soil erosion. Various tracers have been adopted, often in combination, to identify sediment source type and its spatial origin; these include fallout radionuclides, geochemical tracers, mineral magnetic properties and bulk and compound-specific stable isotopes. In this review, the applicability of these techniques to particular settings and their advantages and limitations are reviewed. By synthesizing existing approaches, that make use of multiple tracers in combination with measured changes of channel geomorphological attributes, an integrated analysis of tracer profiles in deposited sediments in lakes and reservoirs can be made. Through a multi-scale approach for fine sediment tracking, temporal changes in soil erosion and sediment load can be reconstructed and the consequences of changing catchment practices evaluated. We recommend that long-term, as well as short-term, monitoring of riverine fine sediment and corresponding surface and subsurface sources at nested sites within a catchment are essential. Such monitoring will inform the development and validation of models for predicting dynamics of fine sediment transport as a function of hydro-climatic and geomorphological controls. We highlight that the need for monitoring is particularly important for hilly catchments with complex and changing land use. We recommend that research should be prioritized for sloping farmland-dominated catchments

A review of source tracking techniques for fine sediment within a catchment

Excessive transport of fine sediment, and its associated pollutants, can cause detrimental impacts in aquatic environments. It is therefore important to perform accurate sediment source apportionment to identify hot spots of soil erosion. Various tracers have been adopted, often in combination, to identify sediment source type and its spatial origin; these include fallout radionuclides, geochemical tracers, mineral magnetic properties and bulk and compound-specific stable isotopes. In this review, the applicability of these techniques to particular settings and their advantages and limitations are reviewed. By synthesizing existing approaches, that make use of multiple tracers in combination with measured changes of channel geomorphological attributes, an integrated analysis of tracer profiles in deposited sediments in lakes and reservoirs can be made. Through a multi-scale approach for fine sediment tracking, temporal changes in soil erosion and sediment load can be reconstructed and the consequences of changing catchment practices evaluated. We recommend that long-term, as well as short-term, monitoring of riverine fine sediment and corresponding surface and subsurface sources at nested sites within a catchment are essential. Such monitoring will inform the development and validation of models for predicting dynamics of fine sediment transport as a function of hydro-climatic and geomorphological controls. We highlight that the need for monitoring is particularly important for hilly catchments with complex and changing land use. We recommend that research should be prioritized for sloping farmland-dominated catchments

Sediment source fingerprinting: benchmarking recent outputs, remaining challenges and emerging themes

Abstract: Purpose: This review of sediment source fingerprinting assesses the current state-of-the-art, remaining challenges and emerging themes. It combines inputs from international scientists either with track records in the approach or with expertise relevant to progressing the science. Methods: Web of Science and Google Scholar were used to review published papers spanning the period 2013–2019, inclusive, to confirm publication trends in quantities of papers by study area country and the types of tracers used. The most recent (2018–2019, inclusive) papers were also benchmarked using a methodological decision-tree published in 2017. Scope: Areas requiring further research and international consensus on methodological detail are reviewed, and these comprise spatial variability in tracers and corresponding sampling implications for end-members, temporal variability in tracers and sampling implications for end-members and target sediment, tracer conservation and knowledge-based pre-selection, the physico-chemical basis for source discrimination and dissemination of fingerprinting results to stakeholders. Emerging themes are also discussed: novel tracers, concentration-dependence for biomarkers, combining sediment fingerprinting and age-dating, applications to sediment-bound pollutants, incorporation of supportive spatial information to augment discrimination and modelling, aeolian sediment source fingerprinting, integration with process-based models and development of open-access software tools for data processing. Conclusions: The popularity of sediment source fingerprinting continues on an upward trend globally, but with this growth comes issues surrounding lack of standardisation and procedural diversity. Nonetheless, the last 2 years have also evidenced growing uptake of critical requirements for robust applications and this review is intended to signpost investigators, both old and new, towards these benchmarks and remaining research challenges for, and emerging options for different applications of, the fingerprinting approach

A deconvolutional Bayesian mixing model approach for river basin sediment source apportionment

Increasing complexity in human-environment interactions at multiple watershed scales presents major challenges to sediment source apportionment data acquisition and analysis. Herein, we present a step-change in the application of Bayesian mixing models: Deconvolutional-MixSIAR (D-MIXSIAR) to underpin sustainable management of soil and sediment. This new mixing model approach allows users to directly account for the 'structural hierarchy' of a river basin in terms of sub-watershed distribution. It works by deconvoluting apportionment data derived for multiple nodes along the stream-river network where sources are stratified by sub-watershed. Source and mixture samples were collected from two watersheds that represented (i) a longitudinal mixed agricultural watershed in the south west of England which had a distinct upper and lower zone related to topography and (ii) a distributed mixed agricultural and forested watershed in the mid-hills of Nepal with two distinct sub-watersheds. In the former, geochemical fingerprints were based upon weathering profiles and anthropogenic soil amendments. In the latter compound-specific stable isotope markers based on soil vegetation cover were applied. Mixing model posterior distributions of proportional sediment source contributions differed when sources were pooled across the watersheds (pooled-MixSIAR) compared to those where source terms were stratified by sub-watershed and the outputs deconvoluted (D-MixSIAR). In the first example, the stratified source data and the deconvolutional approach provided greater distinction between pasture and cultivated topsoil source signatures resulting in a different posterior distribution to non-deconvolutional model (conventional approaches over-estimated the contribution of cultivated land to downstream sediment by 2 to 5 times). In the second example, the deconvolutional model elucidated a large input of sediment delivered from a small tributary resulting in differences in the reported contribution of a discrete mixed forest source. Overall D-MixSIAR model posterior distributions had lower (by ca 25-50%) uncertainty and quicker model run times. In both cases, the structured, deconvoluted output cohered more closely with field observations and local knowledge underpinning the need for closer attention to hierarchy in source and mixture terms in river basin source apportionment. Soil erosion and siltation challenge the energy-food-water-environment nexus. This new tool for source apportionment offers wider application across complex environmental systems affected by natural and human-induced change and the lessons learned are relevant to source apportionment applications in other disciplines

Calibration data to build a physically-based model of deposition, re-entrainment, and transport of fine sediment in gravel-bed rivers

This data can be used to understand, evaluate, replicate, and build the physical-based model proposed in a paper entitled "A physically-based model of deposition, re-entrainment, and transport of fine sediment in gravel-bed rivers".THIS DATASET IS ARCHIVED AT DANS/EASY, BUT NOT ACCESSIBLE HERE. TO VIEW A LIST OF FILES AND ACCESS THE FILES IN THIS DATASET CLICK ON THE DOI-LINK ABOV

Elucidating intra-storm variations in suspended sediment sources using a Bayesian fingerprinting approach

There is an increasing need for reliable information on the origin of fine-grained sediment transported by river systems, but critically, at temporal scales that reflect the timing and pattern of sediment mobilization and delivery in response to effective precipitation events. Temporal variability is likely to be more pronounced in steep mountainous catchments. Accordingly, the main objective of this study was to investigate the temporal variability of sediment sources during and between flood events, in a mountainous catchment in Iran, using ageochemical fingerprinting approach and Bayesian un-mixing model. Potential sediment sources were classified as either tributary sub-basin spatial end members or individual source types represented by surface soils and channel banks. A total of 34 geochemical elements, elemental ratios and weathering indices were measured as potential tracers on a total of 155 samples, including 40 target samples collected across the hydrographs of four flood events at the overall catchment outlet. Virtual mixture tests, used to compare the computed source estimates with known source mixtures, revealed better fits in the case of spatial, rather than source type apportionment The Bayesian un-mixing model results revealed pronounced intra-storm variations in the relative contributions from both the spatial sources and source types, but with Quaternary surface soils and channel banks being dominant at different stages of the hydrographs. For all the suspended sediment samples collected throughout the three small to medium size events, the Babazid, middle upstream sub-catchment, was the major (84%–99%) sediment source while for the largest sampled event, suspended sediment samples predominantly (>98%) originated from the Kalkoshan, the most southern sub-catchment. By investigating both spatial sources and source types, temporal variations in the dominant sources were revealed. Quaternary geology and channel banks were identified as the main sediment sources. By combining instantaneous suspended sediment loads through the sampled flood events (across all floods) and using the corresponding source proportions derived from the MixSIR un-mixing model, channel banks and channel bank and surface soils generated 2911 kg and 34,171 kg of suspended sediment, respectively. Whilst the use of spatial source end members is practical in medium-size drainage basins, integration with estimates of sediment source type contributions is more informative to managers in selecting relevant sediment mitigation methods. The intra-storm results underscore the need to manage sediment loss from both surface soils and channel banks

Tracing sediment sources in a mountainous forest catchment under road construction in northern Iran: comparison of Bayesian and frequentist approaches

Development and land use change lead to accelerated soil erosion as a serious environmental problem in river catchments in Iran. Reliable information about the sources of sediment in catchments is therefore necessary to design effective control strategies. This study used a composite sediment source tracing procedure to determine the importance of forest road cuttings as a sediment source in a mountainous catchment located in northern Iran. A fallout radionuclide (137Cs) and 12 geochemical tracers (Ca, Cu, Fe, K, Mg, Mn, Na, Ni, OC, Pb, Sr and TN) were used to determine the relative contributions of three sediment source types (hillslopes, road cuttings and channel banks) to both suspended and bed sediment samples. Two mixing models based on different mathematical concepts were used to apportion the sediment sources: the mixture sampling importance resampling Bayesian model which incorporates the mass-balance matrix and a distribution model using normal and summed probability of normal distributions. The results of both mixing models indicated that sub-soil erosion from road cuttings and channel banks dominated the sources of river bed and suspended sediment samples, respectively. These results therefore highlight that conservation that works in the study area to remedy the sediment problem should initially focus on stabilisation and rehabilitation of road cuttings and channel banks. This successful application of a composite (radionuclide and geochemical) tracing technique for discriminating source end members characterised by different erosion processes underscores the importance of sub-soil erosion in this case study