A new way of valorizing biomaterials: the use of sunflower protein for 1 a-tocopherol microencapsulation

Biopolymer based microparticles were efficiently prepared from sunflower protein (SP) wall material and a-tocopherol (T) active core using a spray-drying technique. Protein enzymatic hydrolysis and/or N-acylation were carried out to make some structural modifications to the vegetable protein. Native and hydrolyzed SP were characterized by Asymmetrical Flow Field-Flow Fractionation (AsFlFFF). Results of AsFlFFF confirmed that size of proteinic macromolecules was influenced by degree of hydrolysis. The effect of protein modifications and the influence of wall/core ratio on both emulsions and microparticle properties were evaluated. Concerning emulsion properties, enzymatic hydrolysis involved a decrease in viscosity, whereas acylation did not significantly affect emulsion droplet size and viscosity. Microparticles obtained with hydrolyzed SP wall material showed lower retention efficiency (RE) than native SP microparticles (62-80% and 93% respectively). Conversely, acylation of both hydrolyzed SP and native SP allowed a higher RE to be reached (up to 100%). Increasing T concentration increased emulsion viscosity, emulsion droplet size, microparticle size, and enhanced RE. These results demonstrated the feasibility of high loaded (up to 79.2% T) microparticles

Impact of milk protein type on the viability and storage stability of microencapsulated Lactobacillus acidophilus using spray drying

Three different milk proteins — skim milk powder (SMP), sodium caseinate (SC) and whey protein concentrate (WPC) — were tested for their ability to stabilize microencapsulated L. acidophilus produced using spray drying. Maltodextrin (MD) was used as the primary wall material in all samples, milk protein as the secondary wall material (7:3 MD/milk protein ratio) and the simple sugars, d-glucose and trehalose were used as tertiary wall materials (8:2:2 MD/protein/sugar ratio) combinations of all wall materials were tested for their ability to enhance the microbial and techno-functional stability of microencapsulated powders. Of the optional secondary wall materials, WPC improved L. acidophilus viability, up to 70 % during drying; SMP enhanced stability by up to 59 % and SC up to 6 %. Lactose and whey protein content enhanced thermoprotection; this is possibly due to their ability to depress the glass transition and melting temperatures and to release antioxidants. The resultant L. acidophilus powders were stored for 90 days at 4 °C, 25 °C and 35 °C and the loss of viability calculated. The highest survival rates were obtained at 4 °C, inactivation rates for storage were dependent on the carrier wall material and the SMP/d-glucose powders had the lowest inactivation rates (0.013 day−1) whilst the highest was observed for the control containing only MD (0.041 day−1) and the SC-based system (0.030 day−1). Further increase in storage temperature (25 °C and 35 °C) was accompanied by increase of the inactivation rates of L. acidophilus that followed Arrhenius kinetics. In general, SMP-based formulations exhibited the highest temperature dependency whilst WPC the lowest. d-Glucose addition improved the storage stability of the probiotic powders although it was accompanied by an increase of the residual moisture, water activity and hygroscopicity, and a reduction of the glass transition temperature in the tested systems

Disaccharide topology induces slow down in local water dynamics

Molecular level insight into water structure and structural dynamics near proteins, lipids and nucleic acids is critical to the quantitative understanding of many biophysical processes. Un- fortunately, understanding hydration and hydration dynamics around such large molecules is challenging because of the necessity of deconvoluting the effects of topography and chemical heterogeneity. Here we study, via classical all atom simulation, water structure and structural dynamics around two biologically relevant solutes large enough to have significant chemical and topological heterogeneity but small enough to be computationally tractable: the disaccharides Kojibiose and Trehalose. We find both molecules to be strongly amphiphilic (as quantified from normalized local density fluctuations) and to induce nonuniform local slowdown in water translational and rotational motion. Detailed analysis of the rotational slowdown shows that while the rotational mechanism is similar to that previously identified in other aqueous systems by Laage, Hynes and coworkers, two novel characteristics are observed: broadening of the transition state during hydrogen bond exchange (water rotation) and a subpopulation of water for which rotation is slowed because of hindered access of the new accepting water molecule to the transition state. Both of these characteristics are expected to be generic features of water rotation around larger biomolecules and, taken together, emphasize the difficulty in transferring insight into water rotation around small molecules to much larger amphiphilic solutes.This work is part of the research program of the “Stichting voor Fundamenteel Onderzoek der Materie (FOM)” which is financially supported by the “Nederlandse organisatie voor Wetenschap- pelijk Onderzoek (NWO)”. Further financial support was provided by a Marie Curie Incoming International Fellowship (RKC). We gratefully acknowledge SARA, the Dutch center for high- performance computing, for computational time and Huib Bakker and Daan Frenkel for useful critical reviews on an earlier version of this work. We thank two anonymous reviewers for their excellent work, especially for bringing to our attention calculations done on the transition state geometry of dimers and the overstructuring of the O-O radial distribution function of SPC/E water

Development and characterization of phytosterol-enriched oil microcapsules for foodstuff application

Phytosterols are lipophilic compounds contained in plants and have several biological activities. The use of phytosterols in food fortification is hampered due to their high melting temperature, chalky taste, and low solubility in an aqueous system. Also, phytosterols are easily oxidized and are poorly absorbed by the human body. Formulation engineering coupled with microencapsulation could be used to overcome these problems. The aim of this study was to investigate the feasibility of encapsulating soybean oil enriched with phytosterols by spray-drying using ternary mixtures of health-promoting ingredients, whey protein isolate (WPI), inulin, and chitosan as carrier agents. The effect of different formulations and spray-drying conditions on the microencapsules properties, encapsulation efficiency, surface oil content, and oxidation stability were studied. It was found that spherical WPI-inulin-chitosan phytosterol-enriched soybean oil microcapsules with an average size below 50 μm could be produced with good encapsulation efficiency (85%), acceptable level of surface oil (11%), and water activity (0.2–0.4) that meet industrial requirements. However, the microcapsules showed very low oxidation stability with peroxide values reaching 101.7 meq O2/kg of oil just after production, and further investigations and optimization are required before any industrial application of this encapsulated system

Insights into SusCD-mediated glycan import by a prominent gut symbiont

In Bacteroidetes, one of the dominant phyla of the mammalian gut, active uptake of large nutrients across the outer membrane is mediated by SusCD protein complexes via a “pedal bin” transport mechanism. However, many features of SusCD function in glycan uptake remain unclear, including ligand binding, the role of the SusD lid and the size limit for substrate transport. Here we characterise the β2,6 fructo-oligosaccharide (FOS) importing SusCD from Bacteroides thetaiotaomicron (Bt1762-Bt1763) to shed light on SusCD function. Co-crystal structures reveal residues involved in glycan recognition and suggest that the large binding cavity can accommodate several substrate molecules, each up to ~2.5 kDa in size, a finding supported by native mass spectrometry and isothermal titration calorimetry. Mutational studies in vivo provide functional insights into the key structural features of the SusCD apparatus and cryo-EM of the intact dimeric SusCD complex reveals several distinct states of the transporter, directly visualising the dynamics of the pedal bin transport mechanism

Effect of soil rigidity and tensile strength on bearing capacity of embedded foundations

The estimation of the bearing capacity of embedded foundations in cohesive soils has important civil engineering applications both onshore and offshore such as bored piles, skirted foundations, spudcan footings and so on. This topic has been extensively investigated numerically in the literature, where it is mostly stated that the commonly used semi-empirical relations in the industry for example by Skempton are extremely conservative. Such conclusion may not be accurate if two relatively neglected aspects are investigated: (a) rigidity index, ratio of shear modulus to undrained shear strength of soil and (b) limited tensile strength of soil. A finite-element analysis was conducted. The influence of these factors on bearing capacity enhancement is presented. Simple algebraic expressions are provided to guide practitioners

Rheological and emulsifying properties of an exopolysaccharide produced by potential probiotic Leuconostoc citreum-BMS strain

EPS-BMS, is to our knowledge, the first high molecular weight exopolysaccharide from potential probiotic Leuconostoc citreum-BMS strain that consists on a mixture of α-(1,6)-dextran branched at the third position and β-(2,6)-levan. This sample exhibited interesting rheological and emulsifying properties under different conditions. Steady shear experiments proved that EPS-BMS had a pseudoplastic behavior without thixotropic properties. Interestingly, pseudoplasticity was maintained even under stress conditions of temperature, pH and salts, which could provide some sensory properties for food products such as mouth feel. Dynamic oscillatory measurements reflected a liquid-like behavior of the sample regardless of the studied EPS concentration, pH, temperature and ionic force. Results related to the emulsifying as well as interfacial properties showed that EPS-BMS had great potential to be applied as emulsifier and/or emulsion stabilizer in both neutral and acidic conditions. Based on the properties reported in this work, EPS-BMS could be potentially applied in the food industry