Vector coprocessor sharing techniques for multicores: performance and energy gains

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing. Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other compiler optimization techniques. Additionally, existing rigid SIMD architectures cannot tolerate efficiently dynamic application environments with many cores that may require the runtime adjustment of assigned vector resources in order to operate at desired energy/performance levels. To simultaneously alleviate these drawbacks of rigid lane-based VP architectures, while also releasing on-chip real estate for other important design choices, the first part of this research proposes three architectural contexts for the implementation of a shared vector coprocessor in multicore processors. Sharing an expensive resource among multiple cores increases the efficiency of the functional units and the overall system throughput. The second part of the dissertation regards the evaluation and characterization of the three proposed shared vector architectures from the performance and power perspectives on an FPGA (Field-Programmable Gate Array) prototype. The third part of this work introduces performance and power estimation models based on observations deduced from the experimental results. The results show the opportunity to adaptively adjust the number of vector lanes assigned to individual cores or processing threads in order to minimize various energy-performance metrics on modern vector- capable multicore processors that run applications with dynamic workloads. Therefore, the fourth part of this research focuses on the development of a fine-to-coarse grain power management technique and a relevant adaptive hardware/software infrastructure which dynamically adjusts the assigned VP resources (number of vector lanes) in order to minimize the energy consumption for applications with dynamic workloads. In order to remove the inherent limitations imposed by FPGA technologies, the fifth part of this work consists of implementing an ASIC (Application Specific Integrated Circuit) version of the shared VP towards precise performance-energy studies involving high- performance vector processing in multicore environments

ACOTES project: Advanced compiler technologies for embedded streaming

Streaming applications are built of data-driven, computational components, consuming and producing unbounded data streams. Streaming oriented systems have become dominant in a wide range of domains, including embedded applications and DSPs. However, programming efficiently for streaming architectures is a challenging task, having to carefully partition the computation and map it to processes in a way that best matches the underlying streaming architecture, taking into account the distributed resources (memory, processing, real-time requirements) and communication overheads (processing and delay). These challenges have led to a number of suggested solutions, whose goal is to improve the programmer’s productivity in developing applications that process massive streams of data on programmable, parallel embedded architectures. StreamIt is one such example. Another more recent approach is that developed by the ACOTES project (Advanced Compiler Technologies for Embedded Streaming). The ACOTES approach for streaming applications consists of compiler-assisted mapping of streaming tasks to highly parallel systems in order to maximize cost-effectiveness, both in terms of energy and in terms of design effort. The analysis and transformation techniques automate large parts of the partitioning and mapping process, based on the properties of the application domain, on the quantitative information about the target systems, and on programmer directives. This paper presents the outcomes of the ACOTES project, a 3-year collaborative work of industrial (NXP, ST, IBM, Silicon Hive, NOKIA) and academic (UPC, INRIA, MINES ParisTech) partners, and advocates the use of Advanced Compiler Technologies that we developed to support Embedded Streaming.Peer ReviewedPostprint (published version

Parallel computing 2011, ParCo 2011: book of abstracts

This book contains the abstracts of the presentations at the conference Parallel Computing 2011, 30 August - 2 September 2011, Ghent, Belgiu

High-performance and hardware-aware computing: proceedings of the second International Workshop on New Frontiers in High-performance and Hardware-aware Computing (HipHaC\u2711), San Antonio, Texas, USA, February 2011 ; (in conjunction with HPCA-17)

High-performance system architectures are increasingly exploiting heterogeneity. The HipHaC workshop aims at combining new aspects of parallel, heterogeneous, and reconfigurable microprocessor technologies with concepts of high-performance computing and, particularly, numerical solution methods. Compute- and memory-intensive applications can only benefit from the full hardware potential if all features on all levels are taken into account in a holistic approach

Vector processor virtualization: distributed memory hierarchy and simultaneous multithreading

Taking advantage of DLP (Data-Level Parallelism) is indispensable in most data streaming and multimedia applications. Several architectures have been proposed to improve both the performance and energy consumption for such applications. Superscalar and VLIW (Very Long Instruction Word) processors, along with SIMD (Single-Instruction Multiple-Data) and vector processor (VP) accelerators, are among the available options for designers to accomplish their desired requirements. On the other hand, these choices turn out to be large resource and energy consumers, while also not being always used efficiently due to data dependencies among instructions and limited portion of vectorizable code in single applications that deploy them. This dissertation proposes an innovative architecture for a multithreaded VP which separates the path for performing data shuffle and memory-indexed accesses from the data path for executing other vector instructions that access the memory. This separation speeds up the most common memory access operations by avoiding extra delays and unnecessary stalls. In this multilane-based VP design, each vector lane uses its own private memory to avoid any stalls during memory access instructions. More importantly, the proposed VP has an innovative multithreaded architecture which makes it highly suitable for concurrent sharing in multicore environments. To this end, the VP which is developed in VHDL and prototyped on an FPGA (Field-Programmable Gate Array), serves as a coprocessor for one or more scalar cores in various system architectures presented in the dissertation. In the first system architecture, the VP is allocated exclusively to a single scalar core. Benchmarking shows that the VP can achieve very high performance. The inclusion of distributed data shuffle engines across vector lanes has a spectacular impact on the execution time, primarily for applications like FFT (Fast-Fourier Transform) that require large amounts of data shuffling. In the second system architecture, a VP virtualization technique is presented which, when applied, enables the multithreaded VP to simultaneously execute many threads of various vector lengths. The threads compete simultaneously for the VP resources having as a goal an improved aggregate VP utilization. This approach yields high VP utilization even under low utilization for the individual threads. A vector register file (VRF) virtualization technique dynamically allocates physical vector registers to running threads. The technique is implemented for a multi-core processor embedded in an FPGA. Under the dynamic creation of threads, benchmarking demonstrates large VP speedups and drastic energy savings when compared to the first system architecture. In the last system architecture, further improvements focus on VP virtualization relying exclusively on hardware. Moreover, a pipelined data shuffle network replaces the non-pipelined shuffle engines. The VP can then take advantage of identical instruction flows that may be present in different vector applications by running in a fused instruction mode that increases its utilization. A power dissipation model is introduced as well as two optimization policies towards minimizing the consumed energy, or the product of the energy and runtime for a given application. Benchmarking shows the positive impact of these optimizations

Trace-based Performance Analysis for Hardware Accelerators

This thesis presents how performance data from hardware accelerators can be included in event logs. It extends the capabilities of trace-based performance analysis to also monitor and record data from this novel parallelization layer. The increasing awareness to power consumption of computing devices has led to an interest in hybrid computing architectures as well. High-end computers, workstations, and mobile devices start to employ hardware accelerators to offload computationally intense and parallel tasks, while at the same time retaining a highly efficient scalar compute unit for non-parallel tasks. This execution pattern is typically asynchronous so that the scalar unit can resume other work while the hardware accelerator is busy. Performance analysis tools provided by the hardware accelerator vendors cover the situation of one host using one device very well. Yet, they do not address the needs of the high performance computing community. This thesis investigates ways to extend existing methods for recording events from highly parallel applications to also cover scenarios in which hardware accelerators aid these applications. After introducing a generic approach that is suitable for any API based acceleration paradigm, the thesis derives a suggestion for a generic performance API for hardware accelerators and its implementation with NVIDIA CUPTI. In a next step the visualization of event logs containing data from execution streams on different levels of parallelism is discussed. In order to overcome the limitations of classic performance profiles and timeline displays, a graph-based visualization using Parallel Performance Flow Graphs (PPFGs) is introduced. This novel technical approach is using program states in order to display similarities and differences between the potentially very large number of event streams and, thus, enables a fast way to spot load imbalances. The thesis concludes with the in-depth analysis of a case-study of PIConGPU---a highly parallel, multi-hybrid plasma physics simulation---that benefited greatly from the developed performance analysis methods.Diese Dissertation zeigt, wie der Ablauf von Anwendungsteilen, die auf Hardwarebeschleuniger ausgelagert wurden, als Programmspur mit aufgezeichnet werden kann. Damit wird die bekannte Technik der Leistungsanalyse von Anwendungen mittels Programmspuren so erweitert, dass auch diese neue Parallelitätsebene mit erfasst wird. Die Beschränkungen von Computersystemen bezüglich der elektrischen Leistungsaufnahme hat zu einer steigenden Anzahl von hybriden Computerarchitekturen geführt. Sowohl Hochleistungsrechner, aber auch Arbeitsplatzcomputer und mobile Endgeräte nutzen heute Hardwarebeschleuniger um rechenintensive, parallele Programmteile auszulagern und so den skalaren Hauptprozessor zu entlasten und nur für nicht parallele Programmteile zu verwenden. Dieses Ausführungsschema ist typischerweise asynchron: der Skalarprozessor kann, während der Hardwarebeschleuniger rechnet, selbst weiterarbeiten. Die Leistungsanalyse-Werkzeuge der Hersteller von Hardwarebeschleunigern decken den Standardfall (ein Host-System mit einem Hardwarebeschleuniger) sehr gut ab, scheitern aber an einer Unterstützung von hochparallelen Rechnersystemen. Die vorliegende Dissertation untersucht, in wie weit auch multi-hybride Anwendungen die Aktivität von Hardwarebeschleunigern aufzeichnen können. Dazu wird die vorhandene Methode zur Erzeugung von Programmspuren für hochparallele Anwendungen entsprechend erweitert. In dieser Untersuchung wird zuerst eine allgemeine Methodik entwickelt, mit der sich für jede API-gestützte Hardwarebeschleunigung eine Programmspur erstellen lässt. Darauf aufbauend wird eine eigene Programmierschnittstelle entwickelt, die es ermöglicht weitere leistungsrelevante Daten aufzuzeichnen. Die Umsetzung dieser Schnittstelle wird am Beispiel von NVIDIA CUPTI darstellt. Ein weiterer Teil der Arbeit beschäftigt sich mit der Darstellung von Programmspuren, welche Aufzeichnungen von den unterschiedlichen Parallelitätsebenen enthalten. Um die Einschränkungen klassischer Leistungsprofile oder Zeitachsendarstellungen zu überwinden, wird mit den parallelen Programmablaufgraphen (PPFGs) eine neue graphenbasisierte Darstellungsform eingeführt. Dieser neuartige Ansatz zeigt eine Programmspur als eine Folge von Programmzuständen mit gemeinsamen und unterchiedlichen Abläufen. So können divergierendes Programmverhalten und Lastimbalancen deutlich einfacher lokalisiert werden. Die Arbeit schließt mit der detaillierten Analyse von PIConGPU -- einer multi-hybriden Simulation aus der Plasmaphysik --, die in großem Maße von den in dieser Arbeit entwickelten Analysemöglichkeiten profiert hat

Overcoming the Intuition Wall: Measurement and Analysis in Computer Architecture

These are exciting times for computer architecture research. Today there is significant demand to improve the performance and energy-efficiency of emerging, transformative applications which are being hammered out by the hundreds for new computing platforms and usage models. This booming growth of applications and the variety of programming languages used to create them is challenging our ability as architects to rapidly and rigorously characterize these applications. Concurrently, hardware has become more complex with the emergence of accelerators, multicore systems, and heterogeneity caused by further divergence between processor market segments. No one architect can now understand all the complexities of many systems and reason about the full impact of changes or new applications. To that end, this dissertation presents four case studies in quantitative methods. Each case study attacks a different application and proposes a new measurement or analytical technique. In each case study we find at least one surprising or unintuitive result which would likely not have been found without the application of our method