Testability of Switching Lattices in the Cellular Fault Model

A switching lattice is a two-dimensional array of four-terminal switches implemented in its cells. Each switch is linked to the four neighbors and is connected with them when the switch is ON, or is disconnected when the switch is OFF. Recently, with the advent of a variety of emerging nanoscale technologies based on regular arrays of switches, lattices of multi-terminal switches, originally introduced by Akers in 1972, have found a renewed interest. In this paper, the testability under the Cellular Fault Model (CFM) of switching lattices is defined and analyzed. Moreover, some techniques for improving the testability of lattices are discussed and experimentally evaluated

Logic synthesis and testing techniques for switching nano-crossbar arrays

Beyond CMOS, new technologies are emerging to extend electronic systems with features unavailable to silicon-based devices. Emerging technologies provide new logic and interconnection structures for computation, storage and communication that may require new design paradigms, and therefore trigger the development of a new generation of design automation tools. In the last decade, several emerging technologies have been proposed and the time has come for studying new ad-hoc techniques and tools for logic synthesis, physical design and testing. The main goal of this project is developing a complete synthesis and optimization methodology for switching nano-crossbar arrays that leads to the design and construction of an emerging nanocomputer. New models for diode, FET, and four-terminal switch based nanoarrays are developed. The proposed methodology implements logic, arithmetic, and memory elements by considering performance parameters such as area, delay, power dissipation, and reliability. With combination of logic, arithmetic, and memory elements a synchronous state machine (SSM), representation of a computer, is realized. The proposed methodology targets variety of emerging technologies including nanowire/nanotube crossbar arrays, magnetic switch-based structures, and crossbar memories. The results of this project will be a foundation of nano-crossbar based circuit design techniques and greatly contribute to the construction of emerging computers beyond CMOS. The topic of this project can be considered under the research area of â\u80\u9cEmerging Computing Modelsâ\u80\u9d or â\u80\u9cComputational Nanoelectronicsâ\u80\u9d, more specifically the design, modeling, and simulation of new nanoscale switches beyond CMOS

Implementing Boolean Functions with switching lattice networks

Four terminal switching network is an alternative structure to realize the logic functions in electronic circuit modeling. This network can be used to implement a Boolean function with less number of switches than the two terminal based CMOS switch. Each switch of the network is driven by a Boolean literal. Any switch is connected to its four neighbors if a literal takes the value 1 , else it is disconnected. In our work, we aimed to develop a technique by which we can find out if any Boolean function can be implemented with a given four-terminal network. It is done using the path of any given lattice network. First, we developed a synthesis tool by which we can create a library of Boolean functions with a given four-terminal switching network and random Boolean literals. This tool can be used to check the output of any lattice network which can also function as a lattice network solver. In the next step, we used the library functions to develop and test our MAPPING tool where the functions were given as input and from the output, we can get the implemented function in four terminal lattice network. Finally, we have proposed a systematic procedure to implement any Boolean function with a efficient way by any given one type of lattice network

The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2

Constraint solving over multi-valued logics - application to digital circuits

Due to usage conditions, hazardous environments or intentional causes, physical and virtual systems are subject to faults in their components, which may affect their overall behaviour. In a ‘black-box’ agent modelled by a set of propositional logic rules, in which just a subset of components is externally visible, such faults may only be recognised by examining some output function of the agent. A (fault-free) model of the agent’s system provides the expected output given some input. If the real output differs from that predicted output, then the system is faulty. However, some faults may only become apparent in the system output when appropriate inputs are given. A number of problems regarding both testing and diagnosis thus arise, such as testing a fault, testing the whole system, finding possible faults and differentiating them to locate the correct one. The corresponding optimisation problems of finding solutions that require minimum resources are also very relevant in industry, as is minimal diagnosis. In this dissertation we use a well established set of benchmark circuits to address such diagnostic related problems and propose and develop models with different logics that we formalise and generalise as much as possible. We also prove that all techniques generalise to agents and to multiple faults. The developed multi-valued logics extend the usual Boolean logic (suitable for faultfree models) by encoding values with some dependency (usually on faults). Such logics thus allow modelling an arbitrary number of diagnostic theories. Each problem is subsequently solved with CLP solvers that we implement and discuss, together with a new efficient search technique that we present. We compare our results with other approaches such as SAT (that require substantial duplication of circuits), showing the effectiveness of constraints over multi-valued logics, and also the adequacy of a general set constraint solver (with special inferences over set functions such as cardinality) on other problems. In addition, for an optimisation problem, we integrate local search with a constructive approach (branch-and-bound) using a variety of logics to improve an existing efficient tool based on SAT and ILP

Doctor of Philosophy

dissertationAsynchronous design has a very promising potential even though it has largely received a cold reception from industry. Part of this reluctance has been due to the necessity of custom design languages and computer aided design (CAD) flows to design, optimize, and validate asynchronous modules and systems. Next generation asynchronous flows should support modern programming languages (e.g., Verilog) and application specific integrated circuits (ASIC) CAD tools. They also have to support multifrequency designs with mixed synchronous (clocked) and asynchronous (unclocked) designs. This work presents a novel relative timing (RT) based methodology for generating multifrequency designs using synchronous CAD tools and flows. Synchronous CAD tools must be constrained for them to work with asynchronous circuits. Identification of these constraints and characterization flow to automatically derive the constraints is presented. The effect of the constraints on the designs and the way they are handled by the synchronous CAD tools are analyzed and reported in this work. The automation of the generation of asynchronous design templates and also the constraint generation is an important problem. Algorithms for automation of reset addition to asynchronous circuits and power and/or performance optimizations applied to the circuits using logical effort are explored thus filling an important hole in the automation flow. Constraints representing cyclic asynchronous circuits as directed acyclic graphs (DAGs) to the CAD tools is necessary for applying synchronous CAD optimizations like sizing, path delay optimizations and also using static timing analysis (STA) on these circuits. A thorough investigation for the requirements of cycle cutting while preserving timing paths is presented with an algorithm to automate the process of generating them. A large set of designs for 4 phase handshake protocol circuit implementations with early and late data validity are characterized for area, power and performance. Benchmark circuits with automated scripts to generate various configurations for better understanding of the designs are proposed and analyzed. Extension to the methodology like addition of scan insertion using automatic test pattern generation (ATPG) tools to add testability of datapath in bundled data asynchronous circuit implementations and timing closure approaches are also described. Energy, area, and performance of purely asynchronous circuits and circuits with mixed synchronous and asynchronous blocks are explored. Results indicate the benefits that can be derived by generating circuits with asynchronous components using this methodology

Carbon Nanotube Interconnect Modeling for Very Large Scale Integrated Circuits

In this research, we have studied and analyzed the physical and electrical properties of carbon nanotubes. Based on the reported models for current transport behavior in non-ballistic CNT-FETs, we have built a dynamic model for non-ballistic CNT-FETs. We have also extended the surface potential model of a non-ballistic CNT-FET to a ballistic CNT-FET and developed a current transport model for ballistic CNT-FETs. We have studied the current transport in metallic carbon nanotubes. By considering the electron-electron interactions, we have modified two-dimensional fluid model for electron transport to build a semi-classical one-dimensional fluid model to describe the electron transport in carbon nanotubes, which is regarded as one-dimensional system. Besides its accuracy compared with two-dimensional fluid model and Lüttinger liquid theory, one-dimensional fluid model is simple in mathematical modeling and easier to extend for electronic transport modeling of multi-walled carbon nanotubes and single-walled carbon nanotube bundles as interconnections. Based on our reported one-dimensional fluid model, we have calculated the parameters of the transmission line model for the interconnection wires made of single-walled carbon nanotube, multi-walled carbon nanotube and single-walled carbon nanotube bundle. The parameters calculated from these models show close agreements with experiments and other proposed models. We have also implemented these models to study carbon nanotube for on-chip wire inductors and it application in design of LC voltage-controlled oscillators. By using these CNT-FET models and CNT interconnects models, we have studied the behavior of CNT based integrated circuits, such as the inverter, ring oscillator, energy recovery logic; and faults in CNT based circuits

DESIGN AND SYNTHESIS OF HIGH DENSITY INTEGRATED CIRCUITS

Gordon E. Moore, a co-founder of Fairchild Semiconductor, and later of Intel, predicted that after 1980 the complexity of an Integrated Circuit would be expected to double every two years. The prevision made by Moore held for decades, for this reason it is also called \u201cMoore\u2019s law\u201d. The trend in ICs is driven by a reduction of area and power consumption. Today scaled CMOS technologies are the main solution for digital processing. However, the interconnection scaling is not optimal. At every new technology node, the number of metal layers and their thickness increases, exploiting the vertical direction. The reduction of the minimum distance between interconnections and the growth in vertical dimension increase the parasitic capacitance and consequently the dynamic power consumption. Moreover, due to the non-optimal scaling of the interconnections, signal routing is becoming more and more challenging at every technology node advancement. Very scaled technologies make possible to reach a great transistor density. However, the design must comply to strict rules for metal interconnections. The aim of this thesis is to find possible solutions to the disadvantages of scaled CMOS technologies. This goal is obtained in two different ways: using ad-hoc design techniques on today CMOS technologies and finding new approaches to logic synthesis of nanocrossbars, that are an emerging post-CMOS technology. The two approaches used corresponds to the two parts of this thesis. The first part presents the design of an Associative Memory focusing the attention on develop design and logic synthesis techniques to reduce power consumption. The field of applicability of AMs is real-time pattern-recognition tasks. The possible uses range from scientific calculations to image processing for intelligent autonomous devices to image reconstruction for electro-medical apparatuses. In particular AMs are used in High Energy Physics (HEP) experiments to detect particle tracks. HEP experiments generate a huge amount of data, but it is necessary to select and save only the most interesting tracks. Being the data compared in parallel, AMs are synchronous ICs that have a very peaked power consumption, and therefore it is necessary to minimize the power consumption. This AM is designed within the projects IMPART and HTT in 28 nm CMOS technology, using a fully-CMOS approach. The logic is based on the propagation of a \u201ckill signal\u201d that, if one of the bits in a word is not matching, inhibits the switching of the following cells. Thanks to this feature, the designed AM array consumes less than 0.7 fJ/bit. A prototype has been fabricated and it has proven to be functional. The final chip will be installed in the data acquisition chain of ATLAS experiment on HL-LHC at CERN. In the future nanocrossbars are expected to reduce device dimensions and interconnection complexity with respect to CMOS. Logic functions are obtained with switching lattices of four-terminal switches. The research activity on nanocrossbars is done within the project NANOxCOMP. To improve synthesis are used some algorithmic approaches based on Boolean function decomposition and regularities, in particular P-circuits, EXOR-Projected Sums of Products (EP-SOP), Dimension-reducible (D-red) functions and autosymmetric functions. The decomposed functions are implemented into lattices using internal and external decomposition methods. Experimental results show that this approaches reduce the complexity of the single synthesis problem and leads, in average, to a reduction of lattice area and synthesis time. Lattices are made of self-assembled structures and they have a non-negligible defectivity ratio. To cope with this limitation, some techniques to reduce sensitivity to defects have been studied