A Reactive and Cycle-True IP Emulator for MPSoC Exploration

The design of MultiProcessor Systems-on-Chip (MPSoC) emphasizes intellectual-property (IP)-based communication-centric approaches. Therefore, for the optimization of the MPSoC interconnect, the designer must develop traffic models that realistically capture the application behavior as executing on the IP core. In this paper, we introduce a Reactive IP Emulator (RIPE) that enables an effective emulation of the IP-core behavior in multiple environments, including bitand cycle-true simulation. The RIPE is built as a multithreaded abstract instruction-set processor, and it can generate reactive traffic patterns. We compare the RIPE models with cycle-true functional simulation of complex application behavior (tasksynchronization, multitasking, and input/output operations). Our results demonstrate high-accuracy and significant speedups. Furthermore, via a case study, we show the potential use of the RIPE in a design-space-exploration context

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

Towards Efficient Resource Allocation for Embedded Systems

Das Hauptthema ist die dynamische Ressourcenverwaltung in eingebetteten Systemen, insbesondere die Verwaltung von Rechenzeit und Netzwerkverkehr auf einem MPSoC. Die Idee besteht darin, eine Pipeline für die Verarbeitung von Mobiler Kommunikation auf dem Chip dynamisch zu schedulen, um die Effizienz der Hardwareressourcen zu verbessern, ohne den Ressourcenverbrauch des dynamischen Schedulings dramatisch zu erhöhen. Sowohl Software- als auch Hardwaremodule werden auf Hotspots im Ressourcenverbrauch untersucht und optimiert, um diese zu entfernen. Da Applikationen im Bereich der Signalverarbeitung normalerweise mit Hilfe von SDF-Diagrammen beschrieben werden können, wird deren dynamisches Scheduling optimiert, um den Ressourcenverbrauch gegenüber dem üblicherweise verwendeten statischen Scheduling zu verbessern. Es wird ein hybrider dynamischer Scheduler vorgestellt, der die Vorteile von Processing-Networks und der Planung von Task-Graphen kombiniert. Es ermöglicht dem Scheduler, ein Gleichgewicht zwischen der Parallelisierung der Berechnung und der Zunahme des dynamischen Scheduling-Aufands optimal abzuwägen. Der resultierende dynamisch erstellte Schedule reduziert den Ressourcenverbrauch um etwa 50%, wobei die Laufzeit im Vergleich zu einem statischen Schedule nur um 20% erhöht wird. Zusätzlich wird ein verteilter dynamischer SDF-Scheduler vorgeschlagen, der das Scheduling in verschiedene Teile zerlegt, die dann zu einer Pipeline verbunden werden, um mehrere parallele Prozessoren einzubeziehen. Jeder Scheduling-Teil wird zu einem Cluster mit Load-Balancing erweitert, um die Anzahl der parallel laufenden Scheduling-Jobs weiter zu erhöhen. Auf diese Weise wird dem vorhandene Engpass bei dem dynamischen Scheduling eines zentralisierten Schedulers entgegengewirkt, sodass 7x mehr Prozessoren mit dem Pipelined-Clustered-Dynamic-Scheduler für eine typische Signalverarbeitungsanwendung verwendet werden können. Das neue dynamische Scheduling-System setzt das Vorhandensein von drei verschiedenen Kommunikationsmodi zwischen den Verarbeitungskernen voraus. Bei der Emulation auf Basis des häufig verwendeten RDMA-Protokolls treten Leistungsprobleme auf. Sehr gut kann RDMA für einmalige Punkt-zu-Punkt-Datenübertragungen verwendet werden, wie sie bei der Ausführung von Task-Graphen verwendet werden. Process-Networks verwenden normalerweise Datenströme mit hohem Volumen und hoher Bandbreite. Es wird eine FIFO-basierte Kommunikationslösung vorgestellt, die einen zyklischen Puffer sowohl im Sender als auch im Empfänger implementiert, um diesen Bedarf zu decken. Die Pufferbehandlung und die Datenübertragung zwischen ihnen erfolgen ausschließlich in Hardware, um den Software-Overhead aus der Anwendung zu entfernen. Die Implementierung verbessert die Zugriffsverwaltung mehrerer Nutzer auf flächen-effiziente Single-Port Speichermodule. Es werden 0,8 der theoretisch möglichen Bandbreite, die normalerweise nur mit flächenmäßig teureren Dual-Port-Speichern erreicht wird. Der dritte Kommunikationsmodus definiert eine einfache Message-Passing-Implementierung, die ohne einen Verbindungszustand auskommt. Dieser Modus wird für eine effiziente prozessübergreifende Kommunikation des verteilten Scheduling-Systems und der engen Ansteuerung der restlichen Prozessoren benötigt. Eine Flusskontrolle in Hardware stellt sicher, dass eine große Anzahl von Sendern Nachrichten an denselben Empfänger senden kann. Dabei wird garantiert, dass alle Nachrichten korrekt empfangen werden, ohne dass eine Verbindung hergestellt werden muss und die Nachrichtenlaufzeit gering bleibt. Die Arbeit konzentriert sich auf die Optimierung des Codesigns von Hardware und Software, um die kompromisslose Ressourceneffizienz der dynamischen SDF-Graphen-Planung zu erhöhen. Besonderes Augenmerk wird auf die Abhängigkeiten zwischen den Ebenen eines verteilten Scheduling-Systems gelegt, das auf der Verfügbarkeit spezifischer hardwarebeschleunigter Kommunikationsmethoden beruht.:1 Introduction 1.1 Motivation 1.2 The Multiprocessor System on Chip Architecture 1.3 Concrete MPSoC Architecture 1.4 Representing LTE/5G baseband processing as Static Data Flow 1.5 Compuation Stack 1.6 Performance Hotspots Addressed 1.7 State of the Art 1.8 Overview of the Work 2 Hybrid SDF Execution 2.1 Addressed Performance Hotspot 2.2 State of the Art 2.3 Static Data Flow Graphs 2.4 Runtime Environment 2.5 Overhead of Deloying Tasks to a MPSoC 2.6 Interpretation of SDF Graphs as Task Graphs 2.7 Interpreting SDF Graphs as Process Networks 2.8 Hybrid Interpretation 2.9 Graph Topology Considerations 2.10 Theoretic Impact of Hybrid Interpretation 2.11 Simulating Hybrid Execution 2.12 Pipeline SDF Graph Example 2.13 Random SDF Graphs 2.14 LTE-like SDF Graph 2.15 Key Lernings 3 Distribution of Management 3.1 Addressed Performance Hotspot 3.2 State of the Art 3.3 Revising Deployment Overhead 3.4 Distribution of Overhead 3.5 Impact of Management Distribution to Resource Utilization 3.6 Reconfigurability 3.7 Key Lernings 4 Sliced FIFO Hardware 4.1 Addressed Performance Hotspot 4.2 State of the Art 4.3 System Environment 4.4 Sliced Windowed FIFO buffer 4.5 Single FIFO Evaluation 4.6 Multiple FIFO Evalutaion 4.7 Hardware Implementation 4.8 Key Lernings 5 Message Passing Hardware 5.1 Addressed Performance Hotspot 5.2 State of the Art 5.3 Message Passing Regarded as Queueing 5.4 A Remote Direct Memory Access Based Implementation 5.5 Hardware Implementation Concept 5.6 Evalutation of Performance 5.7 Key Lernings 6 SummaryThe main topic is the dynamic resource allocation in embedded systems, especially the allocation of computing time and network traffic on an multi processor system on chip (MPSoC). The idea is to dynamically schedule a mobile communication signal processing pipeline on the chip to improve hardware resource efficiency while not dramatically improve resource consumption because of dynamic scheduling overhead. Both software and hardware modules are examined for resource consumption hotspots and optimized to remove them. Since signal processing can usually be described with the help of static data flow (SDF) graphs, the dynamic handling of those is optimized to improve resource consumption over the commonly used static scheduling approach. A hybrid dynamic scheduler is presented that combines benefits from both processing networks and task graph scheduling. It allows the scheduler to optimally balance parallelization of computation and addition of dynamic scheduling overhead. The resulting dynamically created schedule reduces resource consumption by about 50%, with a runtime increase of only 20% compared to a static schedule. Additionally, a distributed dynamic SDF scheduler is proposed that splits the scheduling into different parts, which are then connected to a scheduling pipeli ne to incorporate multiple parallel working processors. Each scheduling stage is reworked into a load-balanced cluster to increase the number of parallel scheduling jobs further. This way, the still existing dynamic scheduling bottleneck of a centralized scheduler is widened, allowing handling 7x more processors with the pipelined, clustered dynamic scheduler for a typical signal processing application. The presented dynamic scheduling system assumes the presence of three different communication modes between the processing cores. When emulated on top of the commonly used remote direct memory access (RDMA) protocol, performance issues are encountered. Firstly, RDMA can neatly be used for single-shot point-to-point data transfers, like used in task graph scheduling. Process networks usually make use of high-volume and high-bandwidth data streams. A first in first out (FIFO) communication solution is presented that implements a cyclic buffer on both sender and receiver to serve this need. The buffer handling and data transfer between them are done purely in hardware to remove software overhead from the application. The implementation improves the multi-user access to area-efficient single port on-chip memory modules. It achieves 0.8 of the theoretically possible bandwidth, usually only achieved with area expensive dual-port memories. The third communication mode defines a lightweight message passing (MP) implementation that is truly connectionless. It is needed for efficient inter-process communication of the distributed and clustered scheduling system and the worker processing units’ tight coupling. A hardware flow control assures that an arbitrary number of senders can spontaneously start sending messages to the same receiver. Yet, all messages are guaranteed to be correctly received while eliminating the need for connection establishment and keeping a low message delay. The work focuses on the hardware-software codesign optimization to increase the uncompromised resource efficiency of dynamic SDF graph scheduling. Special attention is paid to the inter-level dependencies in developing a distributed scheduling system, which relies on the availability of specific hardwareaccelerated communication methods.:1 Introduction 1.1 Motivation 1.2 The Multiprocessor System on Chip Architecture 1.3 Concrete MPSoC Architecture 1.4 Representing LTE/5G baseband processing as Static Data Flow 1.5 Compuation Stack 1.6 Performance Hotspots Addressed 1.7 State of the Art 1.8 Overview of the Work 2 Hybrid SDF Execution 2.1 Addressed Performance Hotspot 2.2 State of the Art 2.3 Static Data Flow Graphs 2.4 Runtime Environment 2.5 Overhead of Deloying Tasks to a MPSoC 2.6 Interpretation of SDF Graphs as Task Graphs 2.7 Interpreting SDF Graphs as Process Networks 2.8 Hybrid Interpretation 2.9 Graph Topology Considerations 2.10 Theoretic Impact of Hybrid Interpretation 2.11 Simulating Hybrid Execution 2.12 Pipeline SDF Graph Example 2.13 Random SDF Graphs 2.14 LTE-like SDF Graph 2.15 Key Lernings 3 Distribution of Management 3.1 Addressed Performance Hotspot 3.2 State of the Art 3.3 Revising Deployment Overhead 3.4 Distribution of Overhead 3.5 Impact of Management Distribution to Resource Utilization 3.6 Reconfigurability 3.7 Key Lernings 4 Sliced FIFO Hardware 4.1 Addressed Performance Hotspot 4.2 State of the Art 4.3 System Environment 4.4 Sliced Windowed FIFO buffer 4.5 Single FIFO Evaluation 4.6 Multiple FIFO Evalutaion 4.7 Hardware Implementation 4.8 Key Lernings 5 Message Passing Hardware 5.1 Addressed Performance Hotspot 5.2 State of the Art 5.3 Message Passing Regarded as Queueing 5.4 A Remote Direct Memory Access Based Implementation 5.5 Hardware Implementation Concept 5.6 Evalutation of Performance 5.7 Key Lernings 6 Summar

Simulation Native des Systèmes Multiprocesseurs sur Puce à l'aide de la Virtualisation Assistée par le Matériel

L'intégration de plusieurs processeurs hétérogènes en un seul système sur puce (SoC) est une tendance claire dans les systèmes embarqués. La conception et la vérification de ces systèmes nécessitent des plateformes rapides de simulation, et faciles à construire. Parmi les approches de simulation de logiciels, la simulation native est un bon candidat grâce à l'exécution native de logiciel embarqué sur la machine hôte, ce qui permet des simulations à haute vitesse, sans nécessiter le développement de simulateurs d'instructions. Toutefois, les techniques de simulation natives existantes exécutent le logiciel de simulation dans l'espace de mémoire partagée entre le matériel modélisé et le système d'exploitation hôte. Il en résulte de nombreux problèmes, par exemple les conflits l'espace d'adressage et les chevauchements de mémoire ainsi que l'utilisation des adresses de la machine hôte plutôt des celles des plates-formes matérielles cibles. Cela rend pratiquement impossible la simulation native du code existant fonctionnant sur la plate-forme cible. Pour surmonter ces problèmes, nous proposons l'ajout d'une couche transparente de traduction de l'espace adressage pour séparer l'espace d'adresse cible de celui du simulateur de hôte. Nous exploitons la technologie de virtualisation assistée par matériel (HAV pour Hardware-Assisted Virtualization) à cet effet. Cette technologie est maintenant disponibles sur plupart de processeurs grande public à usage général. Les expériences montrent que cette solution ne dégrade pas la vitesse de simulation native, tout en gardant la possibilité de réaliser l'évaluation des performances du logiciel simulé. La solution proposée est évolutive et flexible et nous fournit les preuves nécessaires pour appuyer nos revendications avec des solutions de simulation multiprocesseurs et hybrides. Nous abordons également la simulation d'exécutables cross- compilés pour les processeurs VLIW (Very Long Instruction Word) en utilisant une technique de traduction binaire statique (SBT) pour généré le code natif. Ainsi il n'est pas nécessaire de faire de traduction à la volée ou d'interprétation des instructions. Cette approche est intéressante dans les situations où le code source n'est pas disponible ou que la plate-forme cible n'est pas supporté par les compilateurs reciblable, ce qui est généralement le cas pour les processeurs VLIW. Les simulateurs générés s'exécutent au-dessus de notre plate-forme basée sur le HAV et modélisent les processeurs de la série C6x de Texas Instruments (TI). Les résultats de simulation des binaires pour VLIW montrent une accélération de deux ordres de grandeur par rapport aux simulateurs précis au cycle près.Integration of multiple heterogeneous processors into a single System-on-Chip (SoC) is a clear trend in embedded systems. Designing and verifying these systems require high-speed and easy-to-build simulation platforms. Among the software simulation approaches, native simulation is a good candidate since the embedded software is executed natively on the host machine, resulting in high speed simulations and without requiring instruction set simulator development effort. However, existing native simulation techniques execute the simulated software in memory space shared between the modeled hardware and the host operating system. This results in many problems, including address space conflicts and overlaps as well as the use of host machine addresses instead of the target hardware platform ones. This makes it practically impossible to natively simulate legacy code running on the target platform. To overcome these issues, we propose the addition of a transparent address space translation layer to separate the target address space from that of the host simulator. We exploit the Hardware-Assisted Virtualization (HAV) technology for this purpose, which is now readily available on almost all general purpose processors. Experiments show that this solution does not degrade the native simulation speed, while keeping the ability to accomplish software performance evaluation. The proposed solution is scalable as well as flexible and we provide necessary evidence to support our claims with multiprocessor and hybrid simulation solutions. We also address the simulation of cross-compiled Very Long Instruction Word (VLIW) executables, using a Static Binary Translation (SBT) technique to generated native code that does not require run-time translation or interpretation support. This approach is interesting in situations where either the source code is not available or the target platform is not supported by any retargetable compilation framework, which is usually the case for VLIW processors. The generated simulators execute on top of our HAV based platform and model the Texas Instruments (TI) C6x series processors. Simulation results for VLIW binaries show a speed-up of around two orders of magnitude compared to the cycle accurate simulators.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Evaluation of Single-Chip, Real-Time Tomographic Data Processing on FPGA - SoC Devices

A novel approach to tomographic data processing has been developed and evaluated using the Jagiellonian PET (J-PET) scanner as an example. We propose a system in which there is no need for powerful, local to the scanner processing facility, capable to reconstruct images on the fly. Instead we introduce a Field Programmable Gate Array (FPGA) System-on-Chip (SoC) platform connected directly to data streams coming from the scanner, which can perform event building, filtering, coincidence search and Region-Of-Response (ROR) reconstruction by the programmable logic and visualization by the integrated processors. The platform significantly reduces data volume converting raw data to a list-mode representation, while generating visualization on the fly.Comment: IEEE Transactions on Medical Imaging, 17 May 201

CoreVA-MPSoC: A Many-core Architecture with Tightly Coupled Shared and Local Data Memories

Ax J, Sievers G, Daberkow J, et al. CoreVA-MPSoC: A Many-core Architecture with Tightly Coupled Shared and Local Data Memories. IEEE Transactions on Parallel and Distributed Systems. 2018;29(5):1030-1043

MEDEA: A Hybrid Shared-memory/Message-passing Multiprocessor NoC-based Architecture

The shared-memory model has been adopted, both for data exchange as well as synchronization using semaphores in almost every on-chip multiprocessor implementation, ranging from general purpose chip multiprocessors (CMPs) to domain specific multi-core graphics processing units (GPUs). Low-latency synchronization is desirable but is hard to achieve in practice due to the memory hierarchy. On the contrary, an explicit exchange of synchronization tokens among the processing elements through dedicated on-chip links would be beneficial for the overall system performance. In this paper we propose the Medea NoC-based framework, a hybrid shared-memory/message-passing approach. Medea has been modeled with a fast, cycle-accurate SystemC implementation enabling a fast system exploration varying several parameters like number and types of cores, cache size and policy and NoC features. In addition, every SystemC block has its RTL counterpart for physical implementation on FPGAs and ASICs. A parallel version of the Jacobi algorithm has been used as a test application to validate the metodology. Results confirm expectations about performance and effectiveness of system exploration and desig