TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022

Bridging the capability gap in environmental gamma-ray spectrometry

Environmental gamma-ray spectroscopy provides a powerful tool that can be used in environmental monitoring given that it offers a compromise between measurement time and accuracy allowing for large areas to be surveyed quickly and relatively inexpensively. Depending on monitoring objectives, spectral information can then be analysed in real-time or post survey to characterise contamination and identify potential anomalies. Smaller volume detectors are of particular worth to environmental surveys as they can be operated in the most demanding environments. However, difficulties are encountered in the selection of an appropriate detector that is robust enough for environmental surveying yet still provides a high quality signal. Furthermore, shortcomings remain with methods employed for robust spectral processing since a number of complexities need to be overcome including: the non-linearity in detector response with source burial depth, large counting uncertainties, accounting for the heterogeneity in the natural background and unreliable methods for detector calibration. This thesis aimed to investigate the application of machine learning algorithms to environmental gamma-ray spectroscopy data to identify changes in spectral shape within large Monte Carlo calibration libraries to estimate source characteristics for unseen field results. Additionally, a 71 × 71 mm lanthanum bromide detector was tested alongside a conventional 71 × 71 mm sodium iodide to assess whether its higher energy efficiency and resolution could make it more reliable in handheld surveys. The research presented in this thesis demonstrates that machine learning algorithms could be successfully applied to noisy spectra to produce valuable source estimates. Of note, were the novel characterisation estimates made on borehole and handheld detector measurements taken from land historically contaminated with 226Ra. Through a novel combination of noise suppression and neural networks the burial depth, activity and source extent of contamination was estimated and mapped. Furthermore, it was demonstrated that Machine Learning techniques could be operated in real-time to identify hazardous 226Ra containing hot particles with much greater confidence than current deterministic approaches such as the gross counting algorithm. It was concluded that remediation of 226Ra contaminated legacy sites could be greatly improved using the methods described in this thesis. Finally, Neural Networks were also applied to estimate the activity distribution of 137Cs, derived from the nuclear industry, in an estuarine environment. Findings demonstrated the method to be theoretically sound, but practically inconclusive, given that much of the contamination at the site was buried beyond the detection limits of the method. It was generally concluded that the noise posed by intrinsic counts in the 71 × 71 mm lanthanum bromide was too substantial to make any significant improvements over a comparable sodium iodide in contamination characterisation using 1 second counts

The Borexino detector at the Laboratori Nazionali del Gran Sasso

Borexino, a large volume detector for low energy neutrino spectroscopy, is currently running underground at the Laboratori Nazionali del Gran Sasso, Italy. The main goal of the experiment is the real-time measurement of sub MeV solar neutrinos, and particularly of the mono energetic (862 keV) Be7 electron capture neutrinos, via neutrino-electron scattering in an ultra-pure liquid scintillator. This paper is mostly devoted to the description of the detector structure, the photomultipliers, the electronics, and the trigger and calibration systems. The real performance of the detector, which always meets, and sometimes exceeds, design expectations, is also shown. Some important aspects of the Borexino project, i.e. the fluid handling plants, the purification techniques and the filling procedures, are not covered in this paper and are, or will be, published elsewhere (see Introduction and Bibliography).Comment: 37 pages, 43 figures, to be submitted to NI

Radon Gas Detection via Vegetation Spectra Responses Using Space-borne Remote Sensing: A Tool for Uranium Exploration

This research aims to determine if there is a discernable satellite-derived spectral signature within vegetation communities that can be linked to elevated occurrences of radon gas. Radon surveys, where the gas is measured directly on the ground, are a tool used in uranium exploration as statistically significant elevated radon values are known to occur in proximity to uranium mineralization. To-date, there has been little to no research into the use of optical remote sensing to quantify radon gas in uranium exploration. Through digitizing and geo-referencing historic survey data from Cluff Lake, Saskatchewan, the radon values were first explored along environmental gradients to understand its spatial distribution. The data were then linked with satellite imagery (Sentinel-2A) to explore spectral patterns and evaluate the potential of characterizing a spectral response that can highlight areas containing above background gas concentrations. Results show that there is strong potential for mapping radon gas via changing spectral characteristics within vegetation, interpreted to be attributed to the effects of radiogenic stress and metal contamination within plants coinciding with anomalous radon gas occurrences and/or elevated amounts of its progeny. It is shown that there are differences in spectral curves of natural-logarithmically transformed radon point-values that have been grouped based on standard deviation between what is considered background, moderate, and high values of radon. Furthermore, vegetation indices using Sentinel-2A bands, focusing in the red-edge and NIR portion of the electromagnetic spectrum, show a significant variation of means between grouped radon values allowing for trend detection and radon pseudo-survey map generation. Investigation into radon distribution at Cluff Lake has also shown a potentially significant relationship between radon gas and vegetation communities, specifically black spruce (Picea mariana), which was not hypothesized. The potential species specific relationship between radon gas and vegetation, along with the variation in spectral curves differentiating what is considered background and elevated occurrences of the gas, show strong potential for further refining radon pseudo-survey maps based on spectral characteristics of the tree-canopy. This research was designed as a tool in uranium exploration, to compliment geological, geophysical, and geochemical exploration methods. The research also has trans-disciplinary applications in biogeochemistry, ecology, and the environmental sector as an aid in mapping radiogenic contamination

Radiation Sensing: Design and Deployment of Sensors and Detectors

Radiation detection is important in many fields, and it poses significant challenges for instrument designers. Radiation detection instruments, particularly for nuclear decommissioning and security applications, are required to operate in unknown environments and should detect and characterise radiation fields in real time. This book covers both theory and practice, and it solicits recent advances in radiation detection, with a particular focus on radiation detection instrument design, real-time data processing, radiation simulation and experimental work, robot design, control systems, task planning and radiation shielding

LUX-ZEPLIN (LZ) Technical Design Report

In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters