Using GENI for experimental evaluation of Software Defined Networking in smart grids

The North American Electric Reliability Corporation (NERC) envisions a smart grid that aggressively explores advance communication network solutions to facilitate real-time monitoring and dynamic control of the bulk electric power system. At the distribution level, the smart grid integrates renewable generation and energy storage mechanisms to improve the reliability of the grid. Furthermore, dynamic pricing and demand management provide customers an avenue to interact with the power system to determine the electricity usage that best satisfies their lifestyle. At the transmission level, efficient communication and a highly automated architecture provide visibility in the power system and as a result, faults are mitigated faster than they can propagate. However, such higher levels of reliability and efficiency rest on the supporting communication infrastructure. To date, utility companies are moving towards Multiprotocol Label Switching (MPLS) because it supports traffic engineering and virtual private networks (VPNs). Furthermore, it provides Quality of Service (QoS) guarantees and fail-over mechanisms in addition to meeting the requirement of non-routability as stipulated by NERC. However, these benefits come at a cost for the infrastructure that supports the fullMPLS specification. With this realization and given a two week implementation and deployment window in GENI, we explore the modularity and flexibility provided by the low cost OpenFlow Software Defined Networking (SDN) solution. In particular, we use OpenFlow to provide 1.) automatic fail-over mechanisms, 2.) a load balancing, and 3.) Quality of Service guarantees: all essential mechanisms for smart grid networks

Software Defined Networks based Smart Grid Communication: A Comprehensive Survey

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is built on different vendor specific devices and protocols. Therefore, the current SG systems are not protocol independent, thus leading to interoperability issue. Software defined network (SDN) has been proposed to monitor and manage the communication networks globally. This article serves as a comprehensive survey on SDN-based SGC. In this article, we first discuss taxonomy of advantages of SDNbased SGC.We then discuss SDN-based SGC architectures, along with case studies. Our article provides an in-depth discussion on routing schemes for SDN-based SGC. We also provide detailed survey of security and privacy schemes applied to SDN-based SGC. We furthermore present challenges, open issues, and future research directions related to SDN-based SGC.Comment: Accepte

A study of the applicability of software-defined networking in industrial networks

173 p.Las redes industriales interconectan sensores y actuadores para llevar a cabo funciones de monitorización, control y protección en diferentes entornos, tales como sistemas de transporte o sistemas de automatización industrial. Estos sistemas ciberfísicos generalmente están soportados por múltiples redes de datos, ya sean cableadas o inalámbricas, a las cuales demandan nuevas prestaciones, de forma que el control y gestión de tales redes deben estar acoplados a las condiciones del propio sistema industrial. De este modo, aparecen requisitos relacionados con la flexibilidad, mantenibilidad y adaptabilidad, al mismo tiempo que las restricciones de calidad de servicio no se vean afectadas. Sin embargo, las estrategias de control de red tradicionales generalmente no se adaptan eficientemente a entornos cada vez más dinámicos y heterogéneos.Tras definir un conjunto de requerimientos de red y analizar las limitaciones de las soluciones actuales, se deduce que un control provisto independientemente de los propios dispositivos de red añadiría flexibilidad a dichas redes. Por consiguiente, la presente tesis explora la aplicabilidad de las redes definidas por software (Software-Defined Networking, SDN) en sistemas de automatización industrial. Para llevar a cabo este enfoque, se ha tomado como caso de estudio las redes de automatización basadas en el estándar IEC 61850, el cual es ampliamente usado en el diseño de las redes de comunicaciones en sistemas de distribución de energía, tales como las subestaciones eléctricas. El estándar IEC 61850 define diferentes servicios y protocolos con altos requisitos en terminos de latencia y disponibilidad de la red, los cuales han de ser satisfechos mediante técnicas de ingeniería de tráfico. Como resultado, aprovechando la flexibilidad y programabilidad ofrecidas por las redes definidas por software, en esta tesis se propone una arquitectura de control basada en el protocolo OpenFlow que, incluyendo tecnologías de gestión y monitorización de red, permite establecer políticas de tráfico acorde a su prioridad y al estado de la red.Además, las subestaciones eléctricas son un ejemplo representativo de infraestructura crítica, que son aquellas en las que un fallo puede resultar en graves pérdidas económicas, daños físicos y materiales. De esta forma, tales sistemas deben ser extremadamente seguros y robustos, por lo que es conveniente la implementación de topologías redundantes que ofrezcan un tiempo de reacción ante fallos mínimo. Con tal objetivo, el estándar IEC 62439-3 define los protocolos Parallel Redundancy Protocol (PRP) y High-availability Seamless Redundancy (HSR), los cuales garantizan un tiempo de recuperación nulo en caso de fallo mediante la redundancia activa de datos en redes Ethernet. Sin embargo, la gestión de redes basadas en PRP y HSR es estática e inflexible, lo que, añadido a la reducción de ancho de banda debida la duplicación de datos, hace difícil un control eficiente de los recursos disponibles. En dicho sentido, esta tesis propone control de la redundancia basado en el paradigma SDN para un aprovechamiento eficiente de topologías malladas, al mismo tiempo que se garantiza la disponibilidad de las aplicaciones de control y monitorización. En particular, se discute cómo el protocolo OpenFlow permite a un controlador externo configurar múltiples caminos redundantes entre dispositivos con varias interfaces de red, así como en entornos inalámbricos. De esta forma, los servicios críticos pueden protegerse en situaciones de interferencia y movilidad.La evaluación de la idoneidad de las soluciones propuestas ha sido llevada a cabo, principalmente, mediante la emulación de diferentes topologías y tipos de tráfico. Igualmente, se ha estudiado analítica y experimentalmente cómo afecta a la latencia el poder reducir el número de saltos en las comunicaciones con respecto al uso de un árbol de expansión, así como balancear la carga en una red de nivel 2. Además, se ha realizado un análisis de la mejora de la eficiencia en el uso de los recursos de red y la robustez alcanzada con la combinación de los protocolos PRP y HSR con un control llevado a cabo mediante OpenFlow. Estos resultados muestran que el modelo SDN podría mejorar significativamente las prestaciones de una red industrial de misión crítica

Smart grid communication network management with variable communication requirements

Pametna elektroenergetska mreža predstavlja mrežu nove generacije koja treba da bude efikasna, proširiva, pouzdana i jednostavna za upravljanje. Pametnu mrežu karakteriše veliki broj uređaja i dvosmerna komunikacija sa njima. Ovi uređaji će generisati ogromne količine podataka koje je potrebno pročitati i transportovati do kontrolnog centra, za šta je neophodna odgovarajuća komunikaciona infrastruktura koja obezbeđuje adekvatan kvalitet usluge. U ovoj disertaciji je prikazano rešenje za obezbeđivanje kvaliteta usluge sabraćaja sa dinamičkim promenama prioriteta i propusnog opsega bazirano na programabilnim računarskim mrežama. Takođe je razvijena platforma za evaluaciju komunikacione infrastrukture pametnih mreža kako bi se omogućilo jednostavnije emuliranje različitih mrežnih topologija za potrebe razvoja novih algoritama upravljanja. Performanse rešenja su potvrđene putem šest testnih scenarija i pokazano je da predstavljeno rešenje daje bolje rezultate za sve scenarije sa aspekta obezbeđivanja propusnog opsega i mrežnog kašnjenja.Smart grid represents the next generation power network which should be efficient, extensible, reliable and easy to manage. The smart grid will have a great number of devices with two-way communication. These devices will generate large amount of data that needs to be read and transported to utility control center, which further requires adequate communication infrastructure with appropriate quality of service. This dissertation presents a solution for providing quality of service for traffic with dynamic priority and bandwidth requirements, based on software defined networks. The platform for smart grid communication infrastructure evaluation is developed to enable easy emulation of different network topologies for the purpose of developing new control algorithms. Solution performance is verified using six test scenarios and it is shown that the proposed solution gives better results for all scenarios from the aspect of bandwidth provision and network latency

A Logically Centralized Approach for Control and Management of Large Computer Networks

Management of large enterprise and Internet Service Provider networks is a complex, error-prone, and costly challenge. It is widely accepted that the key contributors to this complexity are the bundling of control and data forwarding in traditional routers and the use of fully distributed protocols for network control. To address these limitations, the networking research community has been pursuing the vision of simplifying the functional role of a router to its primary task of packet forwarding. This enables centralizing network control at a decision plane where network-wide state can be maintained, and network control can be centrally and consistently enforced. However, scalability and fault-tolerance concerns with physical centralization motivate the need for a more flexible and customizable approach. This dissertation is an attempt at bridging the gap between the extremes of distribution and centralization of network control. We present a logically centralized approach for the design of network decision plane that can be realized by using a set of physically distributed controllers in a network. This approach is aimed at giving network designers the ability to customize the level of control and management centralization according to the scalability, fault-tolerance, and responsiveness requirements of their networks. Our thesis is that logical centralization provides a robust, reliable, and efficient paradigm for management of large networks and we present several contributions to prove this thesis. For network planning, we describe techniques for optimizing the placement of network controllers and provide guidance on the physical design of logically centralized networks. For network operation, algorithms for maintaining dynamic associations between the decision plane and network devices are presented, along with a protocol that allows a set of network controllers to coordinate their decisions, and present a unified interface to the managed network devices. Furthermore, we study the trade-offs in decision plane application design and provide guidance on application state and logic distribution. Finally, we present results of extensive numerical and simulative analysis of the feasibility and performance of our approach. The results show that logical centralization can provide better scalability and fault-tolerance while maintaining performance similarity with traditional distributed approach

Resilient and Scalable Forwarding for Software-Defined Networks with P4-Programmable Switches

Traditional networking devices support only fixed features and limited configurability. Network softwarization leverages programmable software and hardware platforms to remove those limitations. In this context the concept of programmable data planes allows directly to program the packet processing pipeline of networking devices and create custom control plane algorithms. This flexibility enables the design of novel networking mechanisms where the status quo struggles to meet high demands of next-generation networks like 5G, Internet of Things, cloud computing, and industry 4.0. P4 is the most popular technology to implement programmable data planes. However, programmable data planes, and in particular, the P4 technology, emerged only recently. Thus, P4 support for some well-established networking concepts is still lacking and several issues remain unsolved due to the different characteristics of programmable data planes in comparison to traditional networking. The research of this thesis focuses on two open issues of programmable data planes. First, it develops resilient and efficient forwarding mechanisms for the P4 data plane as there are no satisfying state of the art best practices yet. Second, it enables BIER in high-performance P4 data planes. BIER is a novel, scalable, and efficient transport mechanism for IP multicast traffic which has only very limited support of high-performance forwarding platforms yet. The main results of this thesis are published as 8 peer-reviewed and one post-publication peer-reviewed publication. The results cover the development of suitable resilience mechanisms for P4 data planes, the development and implementation of resilient BIER forwarding in P4, and the extensive evaluations of all developed and implemented mechanisms. Furthermore, the results contain a comprehensive P4 literature study. Two more peer-reviewed papers contain additional content that is not directly related to the main results. They implement congestion avoidance mechanisms in P4 and develop a scheduling concept to find cost-optimized load schedules based on day-ahead forecasts

Esquema de controlo para redes multicast baseadas com classes

Doutoramento em Engenharia ElectrotécnicaThe expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.À medida que as Tecnologias de Informação (TIs) se tornaram parte integrante da nossa sociedade, a expectativa dos cidadãos relativamente ao uso desses serviços também demonstrou um aumento, seja no âmbito das atividades profissionais, de lazer, aplicações de segurança crítica ou negócios. Portanto, as limitações dos projetos de rede tradicionais quanto ao fornecimento de serviços inovadores e aplicações avançadas motivaram um consenso quanto à integração de todos os serviços e infra-estruturas de comutação de pacotes, utilizando o IP, de modo a extrair benefícios económicos e um controlo mais flexível nas Redes de Nova Geração (RNG). Entretanto, tendo em vista que a Internet não apresenta capacidade de diferenciação de serviços, e sabendo que cada serviço apresenta as suas necessidades próprias, como por exemplo, a Qualidade de Serviço - QoS, a necessidade de formas mais evoluídas de comunicação tem-se tornado cada vez mais visível, levando a mudanças radicais na arquitectura das redes, que exigem soluções adequadas para a admissão de serviços e controlo de recursos de rede. Sendo assim, este trabalho aborda questões de controlo de QoS e rede com o objetivo de melhorar o desempenho do controlo de recursos total em redes atuais e futuras, através da análise dos serviços de acordo com as suas classes de serviço. Esta Tese encontra-se dividida em três partes. Na primeira parte são propostos dois algoritmos de sobre-reserva, o Class-based bandwidth Over-Reservation (COR) e uma extensão melhorada do COR denominado de Enhanced COR (ECOR). A sobre-reserva significa a reserva de uma largura de banda maior para o serviço em questão do que uma classe de serviço (CoS) necessita e, portanto, a quantidade de sinalização para reserva de recursos é reduzida. COR e ECOR consideram uma definição dinâmica de sobre-reserva de parâmetros para CoSs com base nas condições da rede, com vista à redução da sobrecarga de sinalização em QoS sem que ocorra desperdício de largura de banda. O ECOR, por sua vez, difere do COR por permitir a otimização com minimização de controlo de overhead. Além disso, nesta Tese é proposto também um mecanismo de controlo centralizado chamado Advanced Centralization Architecture (ACA) , usando um único Ponto de Controlo de Decisão (CDP) que mantém uma visão ampla da topologia de rede e de análise dos recursos ocupados em tempo real como base de controlo para a rede global. Nesta Tese são utilizadas árvores multicast como base para o transporte de sessão, não só para fins de comunicação em grupo, mas principalmente para que os pacotes que pertençam a uma sessão que é mapeada numa determinada árvore sigam o seu caminho. Os resultados obtidos nas simulações dos mecanismos mostram uma redução significativa da sobrecarga da sinalização de controlo, sem a violação dos requisitos de QoS ou desperdício de recursos. Além disso, foi proposto um modelo analítico no sentido de avaliar o impacto provocado por diversos parâmetros (como por exemplo, a capacidade da ligação, a dinâmica das sessões, etc), no sobre-provisionamento dos recursos. Na segunda parte desta tese propôe-se um mecanismo para controlo descentralizado de recursos denominado de Advanced Class-based resource OverprRovisioning (ACOR), que permite obter uma melhor escalabilidade do que o obtido pelo ACA. O ACOR permite que os pontos de decisão e controlo da rede, os CDPs, sejam distribuídos na periferia da rede, cooperem entre si, através da troca de dados e controlo adequados (por exemplo, localização das árvores e informações sobre o uso da largura de banda), de tal forma que cada CDP seja capaz de manter um bom conhecimento da topologia da rede, bem como das suas ligações. Do ponto de vista de escalabilidade, a cooperação do ACOR é seletiva, o que significa que as informações de controlo são trocadas de forma dinâmica apenas entre os CDPs analisados. Além disso, a sincronização é feita através do conceito proposto de Recursos Virtuais Sobre-Provisionado (VOPR), que partilha as reservas de cada interface para cada árvore que usa a interface. Assim, cada CDP pode processar pedidos de sessão numa ou mais árvores, sem a necessidade de sincronização entre os CDPs correlacionados, enquanto o VOPR da árvore não estiver esgotado. Os resultados analíticos e de simulação demonstram que o controlo de sobre-reserva é agregado em cenários descentralizados, mantendo a sinalização de QoS baixa sem perda de largura de banda. Também é desenvolvido um protocolo de controlo de sinalização chamado ACOR Protocol (ACOR-P) para suportar as arquitecturas de centralização e descentralização deste trabalho. O ACOR Estendido (E-ACOR) agrega a VOPR de todas as árvores que se originam no mesmo CDP, e mais pedidos de sessão podem ser processados sem a necessidade de sincronização quando comparado com ACOR. Além disso, E-ACOR introduz um mecanismo para controlar as informações àcerca do congestionamento da rede, e impede a sincronização desnecessária durante o tempo de congestionamento quando os VOPRs esgotam consoante cada pedido de sessão. A avaliação de desempenho, através de resultados analíticos e de simulação, mostra a superioridade do E-ACOR em minimizar o controlo geral da carga da sinalização, mantendo todas as vantagens do ACOR, sem apresentar violações de QoS ou desperdício de recursos. A última parte desta Tese inclui a proposta para recuperação a falhas, o Survivability ACOR (SACOR), o qual permite ter QoS estável em caso de falhas de ligações e nós. Os resultados de desempenho analisados mostram uma capacidade flexível de sobrevivência caracterizada por um tempo de convergência rápido e diferenciação de tráfego com uma utilização eficiente dos recursos. Em resumo, os mecanismos de controlo de recursos propostos nesta Tese fornecem um suporte eficiente e escalável para controlo da rede, como também para os seus principais sub-sistemas (por exemplo, QoS, controlo de recursos, engenharia de tráfego, multicast, etc) e, assim, permitir a otimização do desempenho da rede a nível do controlo global

Definition and specification of connectivity and QoE/QoS management mechanisms – final report

This document summarizes the WP5 work throughout the project, describing its functional architecture and the solutions that implement the WP5 concepts on network control and orchestration. For this purpose, we defined 3 innovative controllers that embody the network slicing and multi tenancy: SDM-C, SDM-X and SDM-O. The functionalities of each block are detailed with the interfaces connecting them and validated through exemplary network processes, highlighting thus 5G NORMA innovations. All the proposed modules are designed to implement the functionality needed to provide the challenging KPIs required by future 5G networks while keeping the largest possible compatibility with the state of the art

Proactive Mechanisms for Video-on-Demand Content Delivery

Video delivery over the Internet is the dominant source of network load all over the world. Especially VoD streaming services such as YouTube, Netflix, and Amazon Video have propelled the proliferation of VoD in many peoples' everyday life. VoD allows watching video from a large quantity of content at any time and on a multitude of devices, including smart TVs, laptops, and smartphones. Studies show that many people under the age of 32 grew up with VoD services and have never subscribed to a traditional cable TV service. This shift in video consumption behavior is continuing with an ever-growing number of users. satisfy this large demand, VoD service providers usually rely on CDN, which make VoD streaming scalable by operating a geographically distributed network of several hundreds of thousands of servers. Thereby, they deliver content from locations close to the users, which keeps traffic local and enables a fast playback start. CDN experience heavy utilization during the day and are usually reactive to the user demand, which is not optimal as it leads to expensive over-provisioning, to cope with traffic peaks, and overreacting content eviction that decreases the CDN's performance. However, to sustain future VoD streaming projections with hundreds of millions of users, new approaches are required to increase the content delivery efficiency. To this end, this thesis identifies three key research areas that have the potential to address the future demand for VoD content. Our first contribution is the design of vFetch, a privacy-preserving prefetching mechanism for mobile devices. It focuses explicitly on OTT VoD providers such as YouTube. vFetch learns the user interest towards different content channels and uses these insights to prefetch content on a user terminal. To do so, it continually monitors the user behavior and the device's mobile connectivity pattern, to allow for resource-efficient download scheduling. Thereby, vFetch illustrates how personalized prefetching can reduce the mobile data volume and alleviate mobile networks by offloading peak-hour traffic. Our second contribution focuses on proactive in-network caching. To this end, we present the design of the ProCache mechanism that divides the available cache storage concerning separate content categories. Thus, the available storage is allocated to these divisions based on their contribution to the overall cache efficiency. We propose a general work-flow that emphasizes multiple categories of a mixed content workload in addition to a work-flow tailored for music video content, the dominant traffic source on YouTube. Thereby, ProCache shows how content-awareness can contribute to efficient in-network caching. Our third contribution targets the application of multicast for VoD scenarios. Many users request popular VoD content with only small differences in their playback start time which offers a potential for multicast. Therefore, we present the design of the VoDCast mechanism that leverages this potential to multicast parts of popular VoD content. Thereby, VoDCast illustrates how ISP can collaborate with CDN to coordinate on content that should be delivered by ISP-internal multicast