Probabilistic structural mechanics research for parallel processing computers

Aerospace structures and spacecraft are a complex assemblage of structural components that are subjected to a variety of complex, cyclic, and transient loading conditions. Significant modeling uncertainties are present in these structures, in addition to the inherent randomness of material properties and loads. To properly account for these uncertainties in evaluating and assessing the reliability of these components and structures, probabilistic structural mechanics (PSM) procedures must be used. Much research has focused on basic theory development and the development of approximate analytic solution methods in random vibrations and structural reliability. Practical application of PSM methods was hampered by their computationally intense nature. Solution of PSM problems requires repeated analyses of structures that are often large, and exhibit nonlinear and/or dynamic response behavior. These methods are all inherently parallel and ideally suited to implementation on parallel processing computers. New hardware architectures and innovative control software and solution methodologies are needed to make solution of large scale PSM problems practical

CERN openlab Whitepaper on Future IT Challenges in Scientific Research

This whitepaper describes the major IT challenges in scientific research at CERN and several other European and international research laboratories and projects. Each challenge is exemplified through a set of concrete use cases drawn from the requirements of large-scale scientific programs. The paper is based on contributions from many researchers and IT experts of the participating laboratories and also input from the existing CERN openlab industrial sponsors. The views expressed in this document are those of the individual contributors and do not necessarily reflect the view of their organisations and/or affiliates

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture

An FPGA implementation of an investigative many-core processor, Fynbos : in support of a Fortran autoparallelising software pipeline

Includes bibliographical references.In light of the power, memory, ILP, and utilisation walls facing the computing industry, this work examines the hypothetical many-core approach to finding greater compute performance and efficiency. In order to achieve greater efficiency in an environment in which Moore’s law continues but TDP has been capped, a means of deriving performance from dark and dim silicon is needed. The many-core hypothesis is one approach to exploiting these available transistors efficiently. As understood in this work, it involves trading in hardware control complexity for hundreds to thousands of parallel simple processing elements, and operating at a clock speed sufficiently low as to allow the efficiency gains of near threshold voltage operation. Performance is there- fore dependant on exploiting a new degree of fine-grained parallelism such as is currently only found in GPGPUs, but in a manner that is not as restrictive in application domain range. While removing the complex control hardware of traditional CPUs provides space for more arithmetic hardware, a basic level of control is still required. For a number of reasons this work chooses to replace this control largely with static scheduling. This pushes the burden of control primarily to the software and specifically the compiler, rather not to the programmer or to an application specific means of control simplification. An existing legacy tool chain capable of autoparallelising sequential Fortran code to the degree of parallelism necessary for many-core exists. This work implements a many-core architecture to match it. Prototyping the design on an FPGA, it is possible to examine the real world performance of the compiler-architecture system to a greater degree than simulation only would allow. Comparing theoretical peak performance and real performance in a case study application, the system is found to be more efficient than any other reviewed, but to also significantly under perform relative to current competing architectures. This failing is apportioned to taking the need for simple hardware too far, and an inability to implement static scheduling mitigating tactics due to lack of support for such in the compiler

Research and Education in Computational Science and Engineering

Over the past two decades the field of computational science and engineering (CSE) has penetrated both basic and applied research in academia, industry, and laboratories to advance discovery, optimize systems, support decision-makers, and educate the scientific and engineering workforce. Informed by centuries of theory and experiment, CSE performs computational experiments to answer questions that neither theory nor experiment alone is equipped to answer. CSE provides scientists and engineers of all persuasions with algorithmic inventions and software systems that transcend disciplines and scales. Carried on a wave of digital technology, CSE brings the power of parallelism to bear on troves of data. Mathematics-based advanced computing has become a prevalent means of discovery and innovation in essentially all areas of science, engineering, technology, and society; and the CSE community is at the core of this transformation. However, a combination of disruptive developments---including the architectural complexity of extreme-scale computing, the data revolution that engulfs the planet, and the specialization required to follow the applications to new frontiers---is redefining the scope and reach of the CSE endeavor. This report describes the rapid expansion of CSE and the challenges to sustaining its bold advances. The report also presents strategies and directions for CSE research and education for the next decade.Comment: Major revision, to appear in SIAM Revie

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture.Postprint (published version

Investigating Single Precision Floating General Matrix Multiply in Heterogeneous Hardware

The fundamental operation of matrix multiplication is ubiquitous across a myriad of disciplines. Yet, the identification of new optimizations for matrix multiplication remains relevant for emerging hardware architectures and heterogeneous systems. Frameworks such as OpenCL enable computation orchestration on existing systems, and its availability using the Intel High Level Synthesis compiler allows users to architect new designs for reconfigurable hardware using C/C++. Using the HARPv2 as a vehicle for exploration, we investigate the utility of several of the most notable matrix multiplication optimizations to better understand the performance portability of OpenCL and the implications for such optimizations on this and future heterogeneous architectures. Our results give targeted insights into the applicability of best practices that were for existing architectures when used on emerging heterogeneous systems