Modeling and design of robotic systems having spring-damper actuators

The role of inherent dynamics for the improvement of control strategies of robotic systems is studied. A mathematical formulation of the optimal control problem that is suitable for this investigation is proposed. In solving this problem closed-form expressions have been obtained for the optimal control strategies for n degrees-of-freedom robotic systems with passive (unpowered) drives and no restrictions upon their controlling stimuli, and with non-linear viscoelastic spring-damper actuators. The obtained results can be used in designing optimal spring-damper-like passive drives for robotic systems

An Overview on Principles for Energy Efficient Robot Locomotion

Despite enhancements in the development of robotic systems, the energy economy of today's robots lags far behind that of biological systems. This is in particular critical for untethered legged robot locomotion. To elucidate the current stage of energy efficiency in legged robotic systems, this paper provides an overview on recent advancements in development of such platforms. The covered different perspectives include actuation, leg structure, control and locomotion principles. We review various robotic actuators exploiting compliance in series and in parallel with the drive-train to permit energy recycling during locomotion. We discuss the importance of limb segmentation under efficiency aspects and with respect to design, dynamics analysis and control of legged robots. This paper also reviews a number of control approaches allowing for energy efficient locomotion of robots by exploiting the natural dynamics of the system, and by utilizing optimal control approaches targeting locomotion expenditure. To this end, a set of locomotion principles elaborating on models for energetics, dynamics, and of the systems is studied

Development of an Independent Hip Drive for a 2D Biped Walking Machine

Bipedal robots have advantages over wheeled or multi-legged robots because they require fewer footholds for locomotion and can traverse a larger percentage of Earth's terrain including discontinuous or rough terrain. The Intelligent Systems and Automation Laboratory (ISAL) at the University of Kansas has developed a two dimensional (2D) biped walker, nicknamed the Jaywalker, in order to study the requirements necessary for a bipedal robot to traverse uneven terrain and successfully regain stability after encountering perturbations. In order to maintain stability over rough terrain, the robot must be capable of controlling each leg independently ensuring foot placement on stable footholds. Foot placement is, therefore, critical for stability since a misstep can cause the robot to slip or distribute its weight unevenly on the foothold causing it to become unstable and fall over. An independent drive system was incorporated into the robot's hip that directly couples the hip motors to the legs, eliminates flexible connections in the power transmission system that can add unnecessary errors, and increases the leg rotation resolution, which all increase the robot's foot placement accuracy. Testing was performed to prove the independent hip drive design can operate within human gait parameters, has the same or better range of motion as a human, and is capable of taking a stable step

Planning and Control Strategies for Motion and Interaction of the Humanoid Robot COMAN+

Despite the majority of robotic platforms are still confined in controlled environments such as factories, thanks to the ever-increasing level of autonomy and the progress on human-robot interaction, robots are starting to be employed for different operations, expanding their focus from uniquely industrial to more diversified scenarios. Humanoid research seeks to obtain the versatility and dexterity of robots capable of mimicking human motion in any environment. With the aim of operating side-to-side with humans, they should be able to carry out complex tasks without posing a threat during operations. In this regard, locomotion, physical interaction with the environment and safety are three essential skills to develop for a biped. Concerning the higher behavioural level of a humanoid, this thesis addresses both ad-hoc movements generated for specific physical interaction tasks and cyclic movements for locomotion. While belonging to the same category and sharing some of the theoretical obstacles, these actions require different approaches: a general high-level task is composed of specific movements that depend on the environment and the nature of the task itself, while regular locomotion involves the generation of periodic trajectories of the limbs. Separate planning and control architectures targeting these aspects of biped motion are designed and developed both from a theoretical and a practical standpoint, demonstrating their efficacy on the new humanoid robot COMAN+, built at Istituto Italiano di Tecnologia. The problem of interaction has been tackled by mimicking the intrinsic elasticity of human muscles, integrating active compliant controllers. However, while state-of-the-art robots may be endowed with compliant architectures, not many can withstand potential system failures that could compromise the safety of a human interacting with the robot. This thesis proposes an implementation of such low-level controller that guarantees a fail-safe behaviour, removing the threat that a humanoid robot could pose if a system failure occurred

Towards a Smart Semi-Active Prosthetic Leg: Preliminary Assessment and Testing

This paper presents a development of a semi-active prosthetic knee, which can work in both active and passive modes based on the energy required during the gait cycle of various activities of daily livings (ADLs). The prosthetic limb is equipped with various sensors to measure the kinematic and kinetic parameters of both prosthetic limbs. This prosthetic knee is designed to be back-drivable in passive mode to provide a potential use in energy regeneration when there negative energy across the knee joint. Preliminary test has been performed on transfemoral amputee in passive mode to provide some insight to the amputee/prosthesis interaction and performance with the designed prosthetic knee

Integration of aerial and terrestrial locomotion modes in a bioinspired robotic system

In robotics, locomotion is a fundamental task for the development of high-level activities such as navigation. For a robotic system, the challenge of evading environmental obstacles depends both on its physical capabilities and on the strategies followed to achieve it. Thus, a robot with the ability to develop several modes of locomotion (walking, flying or swimming) has a greater probability of success in achieving its goal than a robot that develops only one. In nature, Hymenoptera insects use terrestrial and aerial modes of locomotion to carry out their activities. Mimicry the physical capabilities of these insects opens the possibility of improvements in the area of robotic locomotion. Therefore, this work seeks to generate a bio-inspired robotic system that integrates the terrestrial and aerial modes of locomotion. The methodology used in this research project has considered the anatomical study and characterization of Hymenoptera insects locomotion, the proposal of conceptual models that integrate terrestrial and aerial modes locomotion, the construction of a physical platform and experimental testing of the system. In addition, a gait generation approach based on an artificial nervous system of coupled nonlinear oscillators has been proposed. This approach has resulted in the generation of a coherent and functional gait pattern that, in combination with the flight capabilities of the system, has constituted an aero-terrestrial robot. The results obtained in this work include the construction of a bioinspired physical platform, the generation of the gait process using an artificial nervous system and the experimental tests on the integration of aero-terrestrial locomotion.Conacyt - Becario Naciona

Novel Locomotion Methods in Magnetic Actuation and Pipe Inspection

There is much room for improvement in tube network inspections of jet aircraft. Often, these inspections are incomplete and inconsistent. In this paper, we develop a Modular Robotic Inspection System (MoRIS) for jet aircraft tube networks and a corresponding kinematic model. MoRIS consists of a Base Station for user control and communication, and robotic Vertebrae for accessing and inspecting the network. The presented and tested design of MoRIS can travel up to 9 feet in a tube network. The Vertebrae can navigate in all orientations, including smooth vertical tubes. The design is optimized for nominal 1.5 outside diameter tubes. We developed a model of the Locomotion Vertebra in a tube. We defined the model\u27s coordinate system and its generalized coordinates. We studied the configuration space of the robot, which includes all possible orientations of the Locomotion Vertebra. We derived the expression for the elastic potential energy of the Vertebra\u27s suspensions and minimized it to find the natural settling orientation of the robot. We further explore the effect of the tractive wheel\u27s velocity constraint on locomotion dynamics. Finally, we develop a general model for aircraft tube networks and for a taut tether. Stabilizing bipedal walkers is a engineering target throughout the research community. In this paper, we develop an impulsively actuated walking robot. Through the use of magnetic actuation, for the first time, pure impulsive actuation has been achieved in bipedal walkers. In studying this locomotion technique, we built the world\u27s smallest walker: Big Foot. A dynamical model was developed for Big Foot. A Heel Strike and a Constant Pulse Wave Actuation Schemes were selected for testing. The schemes were validated through simulations and experiments. We showed that there exists two regimes for impulsive actuation. There is a regime for impact-like actuation and a regime for longer duration impulsive actuation