Approaches to multiprocessor error recovery using an on-chip interconnect subsystem

For future multicores, a dedicated interconnect subsystem for on-chip monitors was found to be highly beneficial in terms of scalability, performance and area. In this thesis, such a monitor network (MNoC) is used for multicores to support selective error identification and recovery and maintain target chip reliability in the context of dynamic voltage and frequency scaling (DVFS). A selective shared memory multiprocessor recovery is performed using MNoC in which, when an error is detected, only the group of processors sharing an application with the affected processors are recovered. Although the use of DVFS in contemporary multicores provides significant protection from unpredictable thermal events, a potential side effect can be an increased processor exposure to soft errors. To address this issue, a flexible fault prevention and recovery mechanism has been developed to selectively enable a small amount of per-core dual modular redundancy (DMR) in response to increased vulnerability, as measured by the processor architectural vulnerability factor (AVF). Our new algorithm for DMR deployment aims to provide a stable effective soft error rate (SER) by using DMR in response to DVFS caused by thermal events. The algorithm is implemented in real-time on the multicore using MNoC and controller which evaluates thermal information and multicore performance statistics in addition to error information. DVFS experiments with a multicore simulator using standard benchmarks show an average 6% improvement in overall power consumption and a stable SER by using selective DMR versus continuous DMR deployment

A low-power cache system for high-performance processors

制度:新 ; 報告番号:甲3439号 ; 学位の種類:博士(工学) ; 授与年月日:12-Sep-11 ; 早大学位記番号:新576

Improving the Energy Efficiency of Microprocessor Cores Through Accurate Resource Utilisation Prediction

CMOS technology scaling improves the speed and functionality of microprocessors by reducing the size of transistors. Static power dissipation also increases as a result of scaling however, and has been identified as a limiting factor in technology scaling. As current technology approaches that limit, techniques are required both at the technology-level and in the architecture design to reduce sub-threshold leakage, which accounts for the majority of static power dissipation. This thesis presents an approach to predict the idle periods of execution units at runtime and power-gate them during these periods to eliminate their static power leakage. We exploit similar execution characteristics across loop iterations to build a prediction of the units required to execute an entire loop from the units used over the first few iterations. The utilisation of each execution unit is monitored for each iteration, and thresholds are used to determine which units should be power-gated for the remainder of the loop. Three techniques are presented: Loop-Directed Mothballing (LDM), Extended Loop-Directed Mothballing (ELDM) and schedule balancing. LDM power-gates execution units only during innermost loops, which are simple to detect at runtime. ELDM extends this method to all loops using loop entry and exit information gathered offline. The balancing scheduler is developed to balance the types of instruction issued each cycle, to encourage reuse of execution units and make unnecessary units easier to detect. Extensive simulation using traces of 16 benchmarks from the SPEC CPU2006 suite demonstrates that LDM reduces the energy-delay product of our simulated superscalar processor by 10.3%. For traces with a low proportion of executed instructions inside innermost loops, ELDM improves the energy-delay product by up to 13% by allowing the technique to be applied to other loops in the trace. Employing schedule balancing with ELDM achieves similar savings, and simplifies the hardware required to make predictions

Improving Energy Efficiency of Application-Specific Instruction-Set Processors

Present-day consumer mobile devices seem to challenge the concept of embedded computing by bringing the equivalent of supercomputing power from two decades ago into hand-held devices. This challenge, however, is well met by pushing the boundaries of embedded computing further into areas previously monopolised by Application-Specific Integrated Circuits (ASICs). Furthermore, in areas traditionally associated with embedded computing, an increase in the complexity of algorithms and applications requires a continuous rise in availability of computing power and energy efficiency in order to fit within the same, or smaller, power budget. It is, ultimately, the amount of energy the application execution consumes that dictates the usefulness of a programmable embedded system, in comparison with implementation of an ASIC.This Thesis aimed to explore the energy efficiency overheads of Application-Specific InstructionSet Processors (ASIPs), a class of embedded processors aiming to compete with ASICs. While an ASIC can be designed to provide precise performance and energy efficiency required by a specific application without unnecessary overheads, the cost of design and verification, as well as the inability to upgrade or modify, favour more flexible programmable solutions. The ASIP designs can match the computing performance of the ASIC for specific applications. What is left, therefore, is achieving energy efficiency of a similar order of magnitude.In the past, one area of ASIP design that has been identified as a major consumer of energy is storage of temporal values produced during computation – the Register File (RF), with the associated interconnection network to transport those values between registers and computational Function Units (FUs). In this Thesis, the energy efficiency of RF and interconnection network is studied using the Transport Triggered Architectures (TTAs) template. Specifically, compiler optimisations aiming at reducing the traffic of temporal values between RF and FUs are presented in this Thesis. Bypassing of the temporal value, from the output of the FU which produces it directly in the input ports of the FUs that require it to continue with the computation, saves multiple RF reads. In addition, if all the uses of such a temporal value can be bypassed, the RF write can be eliminated as well. Such optimisations result in a simplification of the RF, via a reduction in the actual number of registers present or a reduction in the number of read and write ports in the RF and improved energy efficiency. In cases where the limited number of the simultaneous RF reads or writes cause a performance bottleneck, such optimisations result in performance improvements leading to faster execution times, therefore, allowing for execution at lower clock frequencies resulting in additional energy savings.Another area of the ASIP design consuming a significant amount of energy is the instruction memory subsystem, which is the artefact required for the programmability of the embedded processor. As this subsystem is not present in ASIC, the energy consumed for storing an application program and reading it from the instruction memories to control processor execution is an overhead that needs to be minimised. In this Thesis, one particular tool to improve the energy efficiency of the instruction memory subsystem – instruction buffer – is examined. While not trivially obvious, the presence of buffers for storing loop bodies, or parts of them, results in a reduced number of reads from the instruction memories. As a result, memories can be put to lower power state leading to lower overall energy consumption, pending energy-efficient buffer implementation. Specifically, an energy-efficient implementation of the instruction buffer is presented in this Thesis, together with analysis tools to identify candidate loops and assess their suitability for storing in the instruction buffer.The studies presented in this Thesis show that the energy overheads associated with the use of embedded processors, in comparison to ad-hoc ASIC solutions, are manageable when carefully considered during the design of an embedded system for a particular application, or application domain. Finally, the methods presented in this Thesis do not restrict the reprogrammability of the embedded system

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

Energy Efficiency and Performance in Multiprocessors Systems on Chip

As process technology shrinks, the transistor count on CPUs has increased. The breakdown of Dennard scaling has led to diminishing returns in terms of performance per power. A trend which promises to impact future CPU designs. This breakdown is due in part to the increase in transistor leakage driven static power. We, now, have constrained energy and power budgets. Thus, energy consumption has to be justified by an increased in performance. Simultaneously, architects have shifted to chip multiprocessors(CMPs) designs with large shared last level cache(LLC) to mitigate the cost of long latency off-chip memory access. A primary reason for that shift is the power efficiency of CMPs. Additionally, technology scaling has allowed the integration of platform components on the chip; a design referred to as multiprocessors system on chip (MpSoC). This integration improves the system performance as the communication latency between the components is reduced. Memory subsystems are essential to CPUs performance. Larger caches provide the CPU faster access to a larger data set. Consequently, the size of last level caches have increased to become a significant leakage power dissipation source. We propose a technique to facilitate power gating a partition of the LLC by migrating the high temporal blocks to a live partition; Thus reducing the performance impact. Given the high latency of memory subsystems, prefetching improves CPU performance by speculating future memory accesses and requesting the data ahead of the demand. In the context of CMPs running multiple concurrent processes, prefetching accuracy is critical to prevent cache pollution effects. Furthermore, given the current constraint energy environment, there is a need for lightweight prefetchers with high accuracy. To this end, we present BFetch a lightweight and accurate prefetcher driven by control flow predictions and effective address speculation. MpSoCs have mostly been used in mobile devices. The energy constraint is more pronounced in MpSoCs-based, battery powered mobile devices. The need to address the energy consumption in MpSoCs is further accentuated by the proliferation of mobile devices. This dissertation presents a framework to optimize the energy in MpSoCs. The proposed framework minimizes the energy consumption while meeting performance and power budgets constraints. We first apply this framework to the CPU then extend it to accommodate the GPU

Efficient Scaling of Out-of-Order Processor Resources

Rather than improving single-threaded performance, with the dawn of the multi-core era, processor microarchitects have exploited Moore's law transistor scaling by increasing core density on a chip and increasing the number of thread contexts within a core. However, single-thread performance and efficiency is still very relevant in the power-constrained multi-core era, as increasing core counts do not yield corresponding performance improvements under real thermal and thread-level constraints. This dissertation provides a detailed study of register reference count structures and its application to both conventional and non-conventional, latency tolerant, out-of-order processors. Prior work has incorporated reference counting, but without a detailed implementation or energy model. This dissertation presents a working implementation of reference count structures and shows the overheads are low and can be recouped by the techniques enabled in high-performance out-of-order processors. A study of register allocation algorithms exploits register file occupancy to reduce power consumption by dynamically resizing the register file, which is especially important in the face of wider multi-threaded processors who require larger register files. Latency tolerance has been introduced as a technique to improve single threaded performance by removing cache-miss dependent instructions from the execution pipeline until the miss returns. This dissertation introduces a microarchitecture with a predictive approach to identify long-latency loads, and reduce the energy cost and overhead of scaling the instruction window inherent in latency tolerant microarchitectures. The key features include a front-end predictive slice-out mechanism and in-order queue structure along with mechanisms to reduce the energy cost and register-file usage of executing instructions. Cycle-level simulation shows improved performance and reduced energy delay for memory-bound workloads. Both techniques scale processor resources, addressing register file inefficiency and the allocation of processor resources to instructions during low ILP regions.Ph.D., Computer Engineering -- Drexel University, 201

Improving the Reliability of Microprocessors under BTI and TDDB Degradations

Reliability is a fundamental challenge for current and future microprocessors with advanced nanoscale technologies. With smaller gates, thinner dielectric and higher temperature microprocessors are vulnerable under aging mechanisms such as Bias Temperature Instability (BTI) and Temperature Dependent Dielectric Breakdown (TDDB). Under continuous stress both parametric and functional errors occur, resulting compromised microprocessor lifetime. In this thesis, based on the thorough study on BTI and TDDB mechanisms, solutions are proposed to mitigating the aging processes on memory based and random logic structures in modern out-of-order microprocessors. A large area of processor core is occupied by memory based structure that is vulnerable to BTI induced errors. The problem is exacerbated when PBTI degradation in NMOS is as severe as NBTI in PMOS in high-k metal gate technology. Hence a novel design is proposed to recover 4 internal gates within a SRAM cell simultaneously to mitigate both NBTI and PBTI effects. This technique is applied to both the L2 cache banks and the busy function units with storage cells in out-of-order pipeline in two different ways. For the L2 cache banks, redundant cache bank is added exclusively for proactive recovery rotation. For the critical and busy function units in out-of-order pipelines, idle cycles are exploited at per-buffer-entry level. Different from memory based structures, combinational logic structures such as function units in execution stage can not use low overhead redundancy to tolerate errors due to their irregular structure. A design framework that aims to improve the reliability of the vulnerable functional units of a processor core is designed and implemented. The approach is designing a generic function unit (GFU) that can be reconfigured to replace a particular functional unit (FU) while it is being recovered for improved lifetime. Although flexible, the GFU is slower than the original target FUs. So GFU is carefully designed so as to minimize the performance loss when it is in-use. More schemes are also designed to avoid using the GFU on performance critical paths of a program execution