Sensors, SLAM and Long-term Autonomy: A Review

Simultaneous Localization and Mapping, commonly known as SLAM, has been an active research area in the field of Robotics over the past three decades. For solving the SLAM problem, every robot is equipped with either a single sensor or a combination of similar/different sensors. This paper attempts to review, discuss, evaluate and compare these sensors. Keeping an eye on future, this paper also assesses the characteristics of these sensors against factors critical to the long-term autonomy challenge

A minimalistic approach to appearance-based visual SLAM

This paper presents a vision-based approach to SLAM in indoor / outdoor environments with minimalistic sensing and computational requirements. The approach is based on a graph representation of robot poses, using a relaxation algorithm to obtain a globally consistent map. Each link corresponds to a relative measurement of the spatial relation between the two nodes it connects. The links describe the likelihood distribution of the relative pose as a Gaussian distribution. To estimate the covariance matrix for links obtained from an omni-directional vision sensor, a novel method is introduced based on the relative similarity of neighbouring images. This new method does not require determining distances to image features using multiple view geometry, for example. Combined indoor and outdoor experiments demonstrate that the approach can handle qualitatively different environments (without modification of the parameters), that it can cope with violations of the “flat floor assumption” to some degree, and that it scales well with increasing size of the environment, producing topologically correct and geometrically accurate maps at low computational cost. Further experiments demonstrate that the approach is also suitable for combining multiple overlapping maps, e.g. for solving the multi-robot SLAM problem with unknown initial poses

Space and camera path reconstruction for omni-directional vision

In this paper, we address the inverse problem of reconstructing a scene as well as the camera motion from the image sequence taken by an omni-directional camera. Our structure from motion results give sharp conditions under which the reconstruction is unique. For example, if there are three points in general position and three omni-directional cameras in general position, a unique reconstruction is possible up to a similarity. We then look at the reconstruction problem with m cameras and n points, where n and m can be large and the over-determined system is solved by least square methods. The reconstruction is robust and generalizes to the case of a dynamic environment where landmarks can move during the movie capture. Possible applications of the result are computer assisted scene reconstruction, 3D scanning, autonomous robot navigation, medical tomography and city reconstructions

Long-term experiments with an adaptive spherical view representation for navigation in changing environments

Real-world environments such as houses and offices change over time, meaning that a mobile robot’s map will become out of date. In this work, we introduce a method to update the reference views in a hybrid metric-topological map so that a mobile robot can continue to localize itself in a changing environment. The updating mechanism, based on the multi-store model of human memory, incorporates a spherical metric representation of the observed visual features for each node in the map, which enables the robot to estimate its heading and navigate using multi-view geometry, as well as representing the local 3D geometry of the environment. A series of experiments demonstrate the persistence performance of the proposed system in real changing environments, including analysis of the long-term stability

Spatio-Temporal Calibration for Omni-Directional Vehicle-Mounted

We present a solution to the problem of spatio-temporal calibration for event cameras mounted on an onmi-directional vehicle. Different from traditional methods that typically determine the camera's pose with respect to the vehicle's body frame using alignment of trajectories, our approach leverages the kinematic correlation of two sets of linear velocity estimates from event data and wheel odometers, respectively. The overall calibration task consists of estimating the underlying temporal offset between the two heterogeneous sensors, and furthermore, recovering the extrinsic rotation that defines the linear relationship between the two sets of velocity estimates. The first sub-problem is formulated as an optimization one, which looks for the optimal temporal offset that maximizes a correlation measurement invariant to arbitrary linear transformation. Once the temporal offset is compensated, the extrinsic rotation can be worked out with an iterative closed-form solver that incrementally registers associated linear velocity estimates. The proposed algorithm is proved effective on both synthetic data and real data, outperforming traditional methods based on alignment of trajectories

2D mapping using omni-directional mobile robot equipped with LiDAR

A room map in a robot environment is needed because it can facilitate localization, automatic navigation, and also object searching. In addition, when a room is difficult to reach, maps can provide information that is helpful to humans. In this study, an omni-directional mobile robot equipped with a LiDAR sensor has been developed for 2D mapping a room. The YDLiDAR X4 sensor is used as an indoor scanner. Raspberry Pi 3 B single board computer (SBC) is used to access LiDAR data and then send it to a computer wirelessly for processing into a map. This computer and SBC are integrated in robot operating system (ROS). The movement of the robot can use manual control or automatic navigation to explore the room. The Hector SLAM algorithm determines the position of the robot based on scan matching of the LiDAR data. The LiDAR data will be used to determine the obstacles encountered by the robot. These obstacles will be represented in occupancy grid mapping. The experimental results show that the robot is able to follow the wall using PID control. The robot can move automatically to construct maps of the actual room with an error rate of 4.59%

An adaptive spherical view representation for navigation in changing environments

Real-world environments such as houses and offices change over time, meaning that a mobile robot’s map will become out of date. In previous work we introduced a method to update the reference views in a topological map so that a mobile robot could continue to localize itself in a changing environment using omni-directional vision. In this work we extend this longterm updating mechanism to incorporate a spherical metric representation of the observed visual features for each node in the topological map. Using multi-view geometry we are then able to estimate the heading of the robot, in order to enable navigation between the nodes of the map, and to simultaneously adapt the spherical view representation in response to environmental changes. The results demonstrate the persistent performance of the proposed system in a long-term experiment