Lane detection system for day vision using altera DE2

The active safety systems used in automotive field are largely exploiting lane detection technique for warning the vehicle drivers to correct any unintended road departure and to reach fully autonomous vehicles. Due to its ability, to be programmed, to perform complex mathematical functions and its characterization of high speed processing, Field Programmable Gate Array (FPGA) could cope with the requirement of lane detection implementation and application. In the present work, lane detection is implemented using FPGA for day vision. This necessitates utilization of image processing techniques like filtering, edge detection and thresholding. The lane detection is performed by firstly capturing the image from a video camera and converted to gray scale. Then, a noise filtering process for gray image is performed using Gaussian and average filter. Methods from first and second order edge detection techniques have been selected for the purpose of lane edge detection. The effect of manually changing the threshold level on image enhancement has been examined. The results showed that raising threshold level would better enhance the image. The type of FPGA device used in the present work is Altera DE2. Firstly, the version DE2 Cyclone II start with (11xxxxxx-xxxx) together with Genx camera has been used. This camera supports both formats NTSC and PAL, while the above version of FPGA backups only NTSC format. The software of lane detection is designed and coded using Verilog language

A high speed Tri-Vision system for automotive applications

Purpose: Cameras are excellent ways of non-invasively monitoring the interior and exterior of vehicles. In particular, high speed stereovision and multivision systems are important for transport applications such as driver eye tracking or collision avoidance. This paper addresses the synchronisation problem which arises when multivision camera systems are used to capture the high speed motion common in such applications. Methods: An experimental, high-speed tri-vision camera system intended for real-time driver eye-blink and saccade measurement was designed, developed, implemented and tested using prototype, ultra-high dynamic range, automotive-grade image sensors specifically developed by E2V (formerly Atmel) Grenoble SA as part of the European FP6 project – sensation (advanced sensor development for attention stress, vigilance and sleep/wakefulness monitoring). Results : The developed system can sustain frame rates of 59.8 Hz at the full stereovision resolution of 1280 × 480 but this can reach 750 Hz when a 10 k pixel Region of Interest (ROI) is used, with a maximum global shutter speed of 1/48000 s and a shutter efficiency of 99.7%. The data can be reliably transmitted uncompressed over standard copper Camera-Link® cables over 5 metres. The synchronisation error between the left and right stereo images is less than 100 ps and this has been verified both electrically and optically. Synchronisation is automatically established at boot-up and maintained during resolution changes. A third camera in the set can be configured independently. The dynamic range of the 10bit sensors exceeds 123 dB with a spectral sensitivity extending well into the infra-red range. Conclusion: The system was subjected to a comprehensive testing protocol, which confirms that the salient requirements for the driver monitoring application are adequately met and in some respects, exceeded. The synchronisation technique presented may also benefit several other automotive stereovision applications including near and far-field obstacle detection and collision avoidance, road condition monitoring and others.Partially funded by the EU FP6 through the IST-507231 SENSATION project.peer-reviewe

Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems

The European research project DESERVE (DEvelopment platform for Safe and Efficient dRiVE, 2012-2015) had the aim of designing and developing a platform tool to cope with the continuously increasing complexity and the simultaneous need to reduce cost for future embedded Advanced Driver Assistance Systems (ADAS). For this purpose, the DESERVE platform profits from cross-domain software reuse, standardization of automotive software component interfaces, and easy but safety-compliant integration of heterogeneous modules. This enables the development of a new generation of ADAS applications, which challengingly combine different functions, sensors, actuators, hardware platforms, and Human Machine Interfaces (HMI). This book presents the different results of the DESERVE project concerning the ADAS development platform, test case functions, and validation and evaluation of different approaches. The reader is invited to substantiate the content of this book with the deliverables published during the DESERVE project. Technical topics discussed in this book include:Modern ADAS development platforms;Design space exploration;Driving modelling;Video-based and Radar-based ADAS functions;HMI for ADAS;Vehicle-hardware-in-the-loop validation system

Computer Vision System-On-Chip Designs for Intelligent Vehicles

Intelligent vehicle technologies are growing rapidly that can enhance road safety, improve transport efficiency, and aid driver operations through sensors and intelligence. Advanced driver assistance system (ADAS) is a common platform of intelligent vehicle technologies. Many sensors like LiDAR, radar, cameras have been deployed on intelligent vehicles. Among these sensors, optical cameras are most widely used due to their low costs and easy installation. However, most computer vision algorithms are complicated and computationally slow, making them difficult to be deployed on power constraint systems. This dissertation investigates several mainstream ADAS applications, and proposes corresponding efficient digital circuits implementations for these applications. This dissertation presents three ways of software / hardware algorithm division for three ADAS applications: lane detection, traffic sign classification, and traffic light detection. Using FPGA to offload critical parts of the algorithm, the entire computer vision system is able to run in real time while maintaining a low power consumption and a high detection rate. Catching up with the advent of deep learning in the field of computer vision, we also present two deep learning based hardware implementations on application specific integrated circuits (ASIC) to achieve even lower power consumption and higher accuracy. The real time lane detection system is implemented on Xilinx Zynq platform, which has a dual core ARM processor and FPGA fabric. The Xilinx Zynq platform integrates the software programmability of an ARM processor with the hardware programmability of an FPGA. For the lane detection task, the FPGA handles the majority of the task: region-of-interest extraction, edge detection, image binarization, and hough transform. After then, the ARM processor takes in hough transform results and highlights lanes using the hough peaks algorithm. The entire system is able to process 1080P video stream at a constant speed of 69.4 frames per second, realizing real time capability. An efficient system-on-chip (SOC) design which classifies up to 48 traffic signs in real time is presented in this dissertation. The traditional histogram of oriented gradients (HoG) and support vector machine (SVM) are proven to be very effective on traffic sign classification with an average accuracy rate of 93.77%. For traffic sign classification, the biggest challenge comes from the low execution efficiency of the HoG on embedded processors. By dividing the HoG algorithm into three fully pipelined stages, as well as leveraging extra on-chip memory to store intermediate results, we successfully achieved a throughput of 115.7 frames per second at 1080P resolution. The proposed generic HoG hardware implementation could also be used as an individual IP core by other computer vision systems. A real time traffic signal detection system is implemented to present an efficient hardware implementation of the traditional grass-fire blob detection. The traditional grass-fire blob detection method iterates the input image multiple times to calculate connected blobs. In digital circuits, five extra on-chip block memories are utilized to save intermediate results. By using additional memories, all connected blob information could be obtained through one-pass image traverse. The proposed hardware friendly blob detection can run at 72.4 frames per second with 1080P video input. Applying HoG + SVM as feature extractor and classifier, 92.11% recall rate and 99.29% precision rate are obtained on red lights, and 94.44% recall rate and 98.27% precision rate on green lights. Nowadays, convolutional neural network (CNN) is revolutionizing computer vision due to learnable layer by layer feature extraction. However, when coming into inference, CNNs are usually slow to train and slow to execute. In this dissertation, we studied the implementation of principal component analysis based network (PCANet), which strikes a balance between algorithm robustness and computational complexity. Compared to a regular CNN, the PCANet only needs one iteration training, and typically at most has a few tens convolutions on a single layer. Compared to hand-crafted features extraction methods, the PCANet algorithm well reflects the variance in the training dataset and can better adapt to difficult conditions. The PCANet algorithm achieves accuracy rates of 96.8% and 93.1% on road marking detection and traffic light detection, respectively. Implementing in Synopsys 32nm process technology, the proposed chip can classify 724,743 32-by-32 image candidates in one second, with only 0.5 watt power consumption. In this dissertation, binary neural network (BNN) is adopted as a potential detector for intelligent vehicles. The BNN constrains all activations and weights to be +1 or -1. Compared to a CNN with the same network configuration, the BNN achieves 50 times better resource usage with only 1% - 2% accuracy loss. Taking car detection and pedestrian detection as examples, the BNN achieves an average accuracy rate of over 95%. Furthermore, a BNN accelerator implemented in Synopsys 32nm process technology is presented in our work. The elastic architecture of the BNN accelerator makes it able to process any number of convolutional layers with high throughput. The BNN accelerator only consumes 0.6 watt and doesn\u27t rely on external memory for storage

Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems

The European research project DESERVE (DEvelopment platform for Safe and Efficient dRiVE, 2012-2015) had the aim of designing and developing a platform tool to cope with the continuously increasing complexity and the simultaneous need to reduce cost for future embedded Advanced Driver Assistance Systems (ADAS). For this purpose, the DESERVE platform profits from cross-domain software reuse, standardization of automotive software component interfaces, and easy but safety-compliant integration of heterogeneous modules. This enables the development of a new generation of ADAS applications, which challengingly combine different functions, sensors, actuators, hardware platforms, and Human Machine Interfaces (HMI). This book presents the different results of the DESERVE project concerning the ADAS development platform, test case functions, and validation and evaluation of different approaches. The reader is invited to substantiate the content of this book with the deliverables published during the DESERVE project. Technical topics discussed in this book include:Modern ADAS development platforms;Design space exploration;Driving modelling;Video-based and Radar-based ADAS functions;HMI for ADAS;Vehicle-hardware-in-the-loop validation system

SPADAS: A high-speed 3D single-photon camera for advanced driver assistance systems

Advanced Driver Assistance Systems (ADAS) are the most advanced technologies to fight road accidents. Within ADAS, an important role is played by radar- and lidar-based sensors, which are mostly employed for collision avoidance and adaptive cruise control. Nonetheless, they have a narrow field-of-view and a limited ability to detect and differentiate objects. Standard camera-based technologies (e.g. stereovision) could balance these weaknesses, but they are currently not able to fulfill all automotive requirements (distance range, accuracy, acquisition speed, and frame-rate). To this purpose, we developed an automotive-oriented CMOS single-photon camera for optical 3D ranging based on indirect time-of-flight (iTOF) measurements. Imagers based on Single-photon avalanche diode (SPAD) arrays offer higher sensitivity with respect to CCD/CMOS rangefinders, have inherent better time resolution, higher accuracy and better linearity. Moreover, iTOF requires neither high bandwidth electronics nor short-pulsed lasers, hence allowing the development of cost-effective systems. The CMOS SPAD sensor is based on 64 × 32 pixels, each able to process both 2D intensity-data and 3D depth-ranging information, with background suppression. Pixel-level memories allow fully parallel imaging and prevents motion artefacts (skew, wobble, motion blur) and partial exposure effects, which otherwise would hinder the detection of fast moving objects. The camera is housed in an aluminum case supporting a 12 mm F/1.4 C-mount imaging lens, with a 40°×20° field-of-view. The whole system is very rugged and compact and a perfect solution for vehicle’s cockpit, with dimensions of 80 mm × 45 mm × 70 mm, and less that 1 W consumption. To provide the required optical power (1.5 W, eye safe) and to allow fast (up to 25 MHz) modulation of the active illumination, we developed a modular laser source, based on five laser driver cards, with three 808 nm lasers each. We present the full characterization of the 3D automotive system, operated both at night and during daytime, in both indoor and outdoor, in real traffic, scenario. The achieved long-range (up to 45m), high dynamic-range (118 dB), highspeed (over 200 fps) 3D depth measurement, and high precision (better than 90 cm at 45 m), highlight the excellent performance of this CMOS SPAD camera for automotive applications. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only