Assimilation de données satellitaires pour le suivi des ressources en eau dans la zone Euro-Méditerranée

Une estimation plus précise de l'état des variables des surfaces terrestres est requise afin d'améliorer notre capacité à comprendre, suivre et prévoir le cycle hydrologique terrestre dans diverses régions du monde. En particulier, les zones méditerranéennes sont souvent caractérisées par un déficit en eau du sol affectant la croissance de la végétation. Les dernières simulations du GIEC (Groupe d'Experts Intergouvernemental sur l'Evolution du Climat) indiquent qu'une augmentation de la fréquence des sécheresses et des vagues de chaleur dans la région Euro-Méditerranée est probable. Il est donc crucial d'améliorer les outils et l'utilisation des observations permettant de caractériser la dynamique des processus des surfaces terrestres de cette région. Les modèles des surfaces terrestres ou LSMs (Land Surface Models) ont été développés dans le but de représenter ces processus à diverses échelles spatiales. Ils sont habituellement forçés par des données horaires de variables atmosphériques en point de grille, telles que la température et l'humidité de l'air, le rayonnement solaire et les précipitations. Alors que les LSMs sont des outils efficaces pour suivre de façon continue les conditions de surface, ils présentent encore des défauts provoqués par les erreurs dans les données de forçages, dans les valeurs des paramètres du modèle, par l'absence de représentation de certains processus, et par la mauvaise représentation des processus dans certaines régions et certaines saisons. Il est aussi possible de suivre les conditions de surface depuis l'espace et la modélisation des variables des surfaces terrestres peut être améliorée grâce à l'intégration dynamique de ces observations dans les LSMs. La télédétection spatiale micro-ondes à basse fréquence est particulièrement utile dans le contexte du suivi de ces variables à l'échelle globale ou continentale. Elle a l'avantage de pouvoir fournir des observations par tout-temps, de jour comme de nuit. Plusieurs produits utiles pour le suivi de la végétation et du cycle hydrologique sont déjà disponibles. Ils sont issus de radars en bande C tels que ASCAT (Advanced Scatterometer) ou Sentinel-1. L'assimilation de ces données dans un LSM permet leur intégration de façon cohérente avec la représentation des processus. Les résultats obtenus à partir de l'intégration de données satellitaires fournissent une estimation de l'état des variables des surfaces terrestres qui sont généralement de meilleure qualité que les simulations sans assimilation de données et que les données satellitaires elles-mêmes. L'objectif principal de ce travail de thèse a été d'améliorer la représentation des variables des surfaces terrestres reliées aux cycles de l'eau et du carbone dans le modèle ISBA grâce à l'assimilation d'observations de rétrodiffusion radar (sigma°) provenant de l'instrument ASCAT. Un opérateur d'observation capable de représenter les sigma° ASCAT à partir de variables simulées par le modèle ISBA a été développé. Une version du WCM (water cloud model) a été mise en œuvre avec succès sur la zone Euro-Méditerranée. Les valeurs simulées ont été comparées avec les observations satellitaires. Une quantification plus détaillée de l'impact de divers facteurs sur le signal a été faite sur le sud-ouest de la France. L'étude de l'impact de la tempête Klaus sur la forêt des Landes a montré que le WCM est capable de représenter un changement brutal de biomasse de la végétation. Le WCM est peu efficace sur les zones karstiques et sur les surfaces agricoles produisant du blé. Dans ce dernier cas, le problème semble provenir d'un décalage temporel entre l'épaisseur optique micro-ondes de la végétation et l'indice de surface foliaire de la végétation. Enfin, l'assimilation directe des sigma° ASCAT a été évaluée sur le sud-ouest de la France.More accurate estimates of land surface conditions are important for enhancing our ability to understand, monitor, and predict key variables of the terrestrial water cycle in various parts of the globe. In particular, the Mediterranean area is frequently characterized by a marked impact of the soil water deficit on vegetation growth. The latest IPCC (Intergovernmental Panel on Climate Change) simulations indicate that occurrence of droughts and warm spells in the Euro-Mediterranean region are likely to increase. It is therefore crucial to improve the ways of understanding, observing and simulating the dynamics of the land surface processes in the Euro-Mediterranean region. Land surface models (LSMs) have been developed for the purpose of representing the land surface processes at various spatial scales. They are usually forced by hourly gridded atmospheric variables such as air temperature, air humidity, solar radiation, precipitation, and are used to simulate land surface states and fluxes. While LSMs can provide a continuous monitoring of land surface conditions, they still show discrepancies due to forcing and parameter errors, missing processes and inadequate model physics for particular areas or seasons. It is also possible to observe the land surface conditions from space. The modelling of land surface variables can be improved through the dynamical integration of these observations into LSMs. Remote sensing observations are particularly useful in this context because they are able to address global and continental scales. Low frequency microwave remote sensing has advantages because it can provide regular observations in all-weather conditions and at either daytime or night-time. A number of satellite-derived products relevant to the hydrological and vegetation cycles are already available from C-band radars such as the Advanced Scatterometer (ASCAT) or Sentinel-1. Assimilating these data into LSMs permits their integration in the process representation in a consistent way. The results obtained from assimilating satellites products provide land surface variables estimates that are generally superior to the model estimates or satellite observations alone. The main objective of this thesis was to improve the representation of land surface variables linked to the terrestrial water and carbon cycles in the ISBA LSM through the assimilation of ASCAT backscatter (sigma°) observations. An observation operator capable of representing the ASCAT sigma° from the ISBA simulated variables was developed. A version of the water cloud model (WCM) was successfully implemented over the Euro-Mediterranean area. The simulated values were compared with those observed from space. A more detailed quantification of the influence of various factors on the signal was made over southwestern France. Focusing on the Klaus storm event in the Landes forest, it was shown that the WCM was able to represent abrupt changes in vegetation biomass. It was also found that the WCM had shortcomings over karstic areas and over wheat croplands. It was shown that the latter was related to a discrepancy between the seasonal cycle of microwave vegetation optical depth (VOD) and leaf area index (LAI). Finally, the direct assimilation of ASCAT sigma° observations was assessed over southwestern France

A Review of the Applications of ASCAT Soil Moisture Products

Remote sensing of soil moisture has reached a level of good maturity and accuracy for which the retrieved products are ready to use in real-world applications. Due to the importance of soil moisture in the partitioning of the water and energy fluxes between the land surface and the atmosphere, a wide range of applications can benefit from the availability of satellite soil moisture products. Specifically, the Advanced SCATterometer (ASCAT) on board the series of Meteorological Operational (Metop) satellites is providing a near real time (and long-term, 9+ years starting from January 2007) soil moisture product, with a nearly daily (sub-daily after the launch of Metop-B) revisit time and a spatial sampling of 12.5 and 25 km. This study first performs a review of the climatic, meteorological, and hydrological studies that use satellite soil moisture products for a better understanding of the water and energy cycle. Specifically, applications that consider satellite soil moisture product for improving their predictions are analyzed and discussed. Moreover, four real examples are shown in which ASCAT soil moisture observations have been successfully applied toward: 1) numerical weather prediction, 2) rainfall estimation, 3) flood forecasting, and 4) drought monitoring and prediction. Finally, the strengths and limitations of ASCAT soil moisture products and the way forward for fully exploiting these data in real-world applications are discussed.228523062

Second-order structure function analysis of scatterometer winds over the Tropical Pacific

22 pages, 16 figures, 1 tableKolmogorov second-order structure functions are used to quantify and compare the small-scale information contained in near-surface ocean wind products derived from measurements by ASCAT on MetOp-A and SeaWinds on QuikSCAT. Two ASCAT and three SeaWinds products are compared in nine regions (classified as rainy or dry) in the tropical Pacific between 10°S and 10°N and 140° and 260°E for the period November 2008 to October 2009. Monthly and regionally averaged longitudinal and transverse structure functions are calculated using along-track samples. To ease the analysis, the following quantities were estimated for the scale range 50 to 300 km and used to intercompare the wind products: (i) structure function slopes, (ii) turbulent kinetic energies (TKE), and (iii) vorticity-to-divergence ratios. All wind products are in good qualitative agreement, but also have important differences. Structure function slopes and TKE differ per wind product, but also show a common variation over time and space. Independent of wind product, longitudinal slopes decrease when sea surface temperature exceeds the threshold for onset of deep convection (about 28°C). In rainy areas and in dry regions during rainy periods, ASCAT has larger divergent TKE than SeaWinds, while SeaWinds has larger vortical TKE than ASCAT. Differences between SeaWinds and ASCAT vortical TKE and vorticity-to-divergence ratios for the convectively active months of each region are large. © 2014. American Geophysical Union. All Rights ReservedThe ASCAT-12.5 and ASCAT-25 data used in this work can be ordered online from the EUMETSAT Data Centre (www.eumetsat.int) as SAF type data in BUFR or NetCDF format. They can also be ordered from PO.DAAC (podaac.jpl.nasa.gov) in NetCDF format only. The SeaWinds-NOAA and QuikSCAT-12.5 data are also available from PO.DAAC. The SeaWinds-KNMI data are available from the KNMI archive upon an email request to [email protected]. Rain-rates and sea surface temperatures were obtained from the Tropical Rainfall Measuring Mission's (TRMM) Microwave Imager (TMI) archive at the Remote Sensing Systems web site (www.ssmi.com). SeaWinds Radiometer (SRAD) rain-rates were obtained from the QuikSCAT 25 km L2B science data product that is available from PO.DAAC. This work has been funded by EUMETSAT in the context of the Numerical Weather Prediction Satellite Applications Facility (NWP SAF). The contribution of GPK has been supported by EUMETSAT as part of the SAF Visiting Scientists programmePeer Reviewe

Ocean Measurements from Space in 2025

Seasat, launched by the US National Aeronautics and Space Administration (NASA) in 1977, was the first dedicated ocean-viewing satellite. Since then, in addition to NASA, the space agencies of Europe, France, Canada, Germany, India, Japan, and China have all launched ocean-viewing sensors or dedicated ocean-viewing satellites. Properties currently measured from space are sea surface temperature; topography (height); salinity; significant wave height and wave spectra; surface wind speed and vectors; ocean color; continental and sea ice extent, "flow, deformation, thickness; ocean mass; and to a lesser extent, surface currents. By 2025, one additional measurement may become available—total surface currents—but the largest foreseen improvements are increased spatial and temporal resolution and increased accuracy for all the currently measured properties

Open access data in polar and cryospheric remote sensing

This paper aims to introduce the main types and sources of remotely sensed data that are freely available and have cryospheric applications. We describe aerial and satellite photography, satellite-borne visible, near-infrared and thermal infrared sensors, synthetic aperture radar, passive microwave imagers and active microwave scatterometers. We consider the availability and practical utility of archival data, dating back in some cases to the 1920s for aerial photography and the 1960s for satellite imagery, the data that are being collected today and the prospects for future data collection; in all cases, with a focus on data that are openly accessible. Derived data products are increasingly available, and we give examples of such products of particular value in polar and cryospheric research. We also discuss the availability and applicability of free and, where possible, open-source software tools for reading and processing remotely sensed data. The paper concludes with a discussion of open data access within polar and cryospheric sciences, considering trends in data discoverability, access, sharing and use.A. Pope would like to acknowledge support from the Earth Observation Technology Cluster, a knowledge exchange project, funded by the Natural Environment Research Council (NERC) under its Technology Clusters Programme, the U.S. National Science Foundation Graduate Research Fellowship Program, Trinity College (Cambridge) and the Dartmouth Visiting Young Scientist program sponsored by the NASA New Hampshire Space Grant.This is the final published version. It's also available from MDPI at http://www.mdpi.com/2072-4292/6/7/6183

Surface Soil Moisture Retrievals from Remote Sensing:Current Status, Products & Future Trends

Advances in Earth Observation (EO) technology, particularly over the last two decades, have shown that soil moisture content (SMC) can be measured to some degree or other by all regions of the electromagnetic spectrum, and a variety of techniques have been proposed to facilitate this purpose. In this review we provide a synthesis of the efforts made during the last 20 years or so towards the estimation of surface SMC exploiting EO imagery, with a particular emphasis on retrievals from microwave sensors. Rather than replicating previous overview works, we provide a comprehensive and critical exploration of all the major approaches employed for retrieving SMC in a range of different global ecosystems. In this framework, we consider the newest techniques developed within optical and thermal infrared remote sensing, active and passive microwave domains, as well as assimilation or synergistic approaches. Future trends and prospects of EO for the accurate determination of SMC from space are subject to key challenges, some of which are identified and discussed within. It is evident from this review that there is potential for more accurate estimation of SMC exploiting EO technology, particularly so, by exploring the use of synergistic approaches between a variety of EO instruments. Given the importance of SMC in Earth’s land surface interactions and to a large range of applications, one can appreciate that its accurate estimation is critical in addressing key scientific and practical challenges in today’s world such as food security, sustainable planning and management of water resources. The launch of new, more sophisticated satellites strengthens the development of innovative research approaches and scientific inventions that will result in a range of pioneering and ground-breaking advancements in the retrievals of soil moisture from space

Statistical analysis and combination of active and passive microwave remote sensing methods for soil moisture retrieval

Knowledge about soil moisture and its spatio-temporal dynamics is essential for the improvement of climate and hydrological modeling, including drought and flood monitoring and forecasting, as well as weather forecasting models. In recent years, several soil moisture products from active and passive microwave remote sensing have become available with high temporal resolution and global coverage. Thus, the validation and evaluation of spatial and temporal soil moisture patterns are of great interest, for improving soil moisture products as well as for their proper use in models or other applications. This thesis analyzes the different accuracy levels of global soil moisture products and identifies the major influencing factors on this accuracy based on a small catchment example. Furthermore, on global scale, structural differences betweenthe soil moisture products were investigated. This includes in particular the representation of spatial and temporal patterns, as well as a general scaling law of soil moisture variability with extent scale. The results of the catchment scale as well as the global scale analyses identified vegetation to have a high impact on the accuracy of remotely sensed soil moisture products. Therefore, an improved method to consider vegetation characteristics in pasive soil moisture retrieval from active radar satellite data was developed and tested. The knowledge gained by this thesis will contribute to improve soil moisture retrieval of current and future microwave remote sensors (e.g. SMOS or SMAP)