Prototyping nfv-based multi-access edge computing in 5G ready networks with open baton

With the increasing acceptance of Network Function Virtualization (NFV) and Software Defined Networking (SDN) technologies, a radical transformation is currently occurring inside network providers infrastructures. The trend of Software-based networks foreseen with the 5th Generation of Mobile Network (5G) is drastically changing requirements in terms of how networks are deployed and managed. One of the major changes requires the transaction towards a distributed infrastructure, in which nodes are built with standard commodity hardware. This rapid deployment of datacenters is paving the way towards a different type of environment in which the computational resources are deployed up to the edge of the network, referred to as Multi-access Edge Computing (MEC) nodes. However, MEC nodes do not usually provide enough resources for executing standard virtualization technologies typically used in large datacenters. For this reason, software containerization represents a lightweight and viable virtualization alternative for such scenarios. This paper presents an architecture based on the Open Baton Management and Orchestration (MANO) framework combining different infrastructural technologies supporting the deployment of container-based network services even at the edge of the network.EC/H2020/687860/EU/Software Defined Networks and Network Function Virtualization Testbed within FIRE+/SoftFIR

APMEC: An Automated Provisioning Framework for Multi-access Edge Computing

Novel use cases and verticals such as connected cars and human-robot cooperation in the areas of 5G and Tactile Internet can significantly benefit from the flexibility and reduced latency provided by Network Function Virtualization (NFV) and Multi-Access Edge Computing (MEC). Existing frameworks managing and orchestrating MEC and NFV are either tightly coupled or completely separated. The former design is inflexible and increases the complexity of one framework. Whereas, the latter leads to inefficient use of computation resources because information are not shared. We introduce APMEC, a dedicated framework for MEC while enabling the collaboration with the management and orchestration (MANO) frameworks for NFV. The new design allows to reuse allocated network services, thus maximizing resource utilization. Measurement results have shown that APMEC can allocate up to 60% more number of network services. Being developed on top of OpenStack, APMEC is an open source project, available for collaboration and facilitating further research activities

NFV Platforms: Taxonomy, Design Choices and Future Challenges

Due to the intrinsically inefficient service provisioning in traditional networks, Network Function Virtualization (NFV) keeps gaining attention from both industry and academia. By replacing the purpose-built, expensive, proprietary network equipment with software network functions consolidated on commodity hardware, NFV envisions a shift towards a more agile and open service provisioning paradigm. During the last few years, a large number of NFV platforms have been implemented in production environments that typically face critical challenges, including the development, deployment, and management of Virtual Network Functions (VNFs). Nonetheless, just like any complex system, such platforms commonly consist of abounding software and hardware components and usually incorporate disparate design choices based on distinct motivations or use cases. This broad collection of convoluted alternatives makes it extremely arduous for network operators to make proper choices. Although numerous efforts have been devoted to investigating different aspects of NFV, none of them specifically focused on NFV platforms or attempted to explore their design space. In this paper, we present a comprehensive survey on the NFV platform design. Our study solely targets existing NFV platform implementations. We begin with a top-down architectural view of the standard reference NFV platform and present our taxonomy of existing NFV platforms based on what features they provide in terms of a typical network function life cycle. Then we thoroughly explore the design space and elaborate on the implementation choices each platform opts for. We also envision future challenges for NFV platform design in the incoming 5G era. We believe that our study gives a detailed guideline for network operators or service providers to choose the most appropriate NFV platform based on their respective requirements. Our work also provides guidelines for implementing new NFV platforms

Network Service Orchestration: A Survey

Business models of network service providers are undergoing an evolving transformation fueled by vertical customer demands and technological advances such as 5G, Software Defined Networking~(SDN), and Network Function Virtualization~(NFV). Emerging scenarios call for agile network services consuming network, storage, and compute resources across heterogeneous infrastructures and administrative domains. Coordinating resource control and service creation across interconnected domains and diverse technologies becomes a grand challenge. Research and development efforts are being devoted to enabling orchestration processes to automate, coordinate, and manage the deployment and operation of network services. In this survey, we delve into the topic of Network Service Orchestration~(NSO) by reviewing the historical background, relevant research projects, enabling technologies, and standardization activities. We define key concepts and propose a taxonomy of NSO approaches and solutions to pave the way towards a common understanding of the various ongoing efforts around the realization of diverse NSO application scenarios. Based on the analysis of the state of affairs, we present a series of open challenges and research opportunities, altogether contributing to a timely and comprehensive survey on the vibrant and strategic topic of network service orchestration.Comment: Accepted for publication at Computer Communications Journa

On the integration of NFV and MEC technologies: architecture analysis and benefits for edge robotics

Forthcoming networks will need to accommodate a large variety of services over a common shared infrastructure. To achieve the necessary flexibility and cost savings, these networks will need to leverage two promising technologies: Network Function Virtualization (NFV) and Multi-access Edge Computing (MEC). While the benefits of NFV and MEC have been largely studied as independent domains, the benefits of an harmonized system comprising these two technologies remains largely unexplored. In this article we first identify a set of reference use cases that would benefit from a joint use of MEC and NFV. Then, we analyze the current state-of-the-art on MEC and NFV integration and we identify several issues that prevent a seamless integration. Next, we consider a reference use case, namely Edge Robotics, to exemplify and characterize these issues in terms of the overall service life cycle: from the initial development, to deployment and termination.This work has been partially funded by the EU H2020 5G-TRANSFORMER Project (grant no. 761536), the H2020 collaborative Europe/Taiwan research project 5G-CORAL (grant no. 761586) and the EU H2020 5GROWTH Project (grant no. 856709)

Introducing Development Features for Virtualized Network Services

Network virtualization and softwarizing network functions are trends aiming at higher network efficiency, cost reduction and agility. They are driven by the evolution in Software Defined Networking (SDN) and Network Function Virtualization (NFV). This shows that software will play an increasingly important role within telecommunication services, which were previously dominated by hardware appliances. Service providers can benefit from this, as it enables faster introduction of new telecom services, combined with an agile set of possibilities to optimize and fine-tune their operations. However, the provided telecom services can only evolve if the adequate software tools are available. In this article, we explain how the development, deployment and maintenance of such an SDN/NFV-based telecom service puts specific requirements on the platform providing it. A Software Development Kit (SDK) is introduced, allowing service providers to adequately design, test and evaluate services before they are deployed in production and also update them during their lifetime. This continuous cycle between development and operations, a concept known as DevOps, is a well known strategy in software development. To extend its context further to SDN/NFV-based services, the functionalities provided by traditional cloud platforms are not yet sufficient. By giving an overview of the currently available tools and their limitations, the gaps in DevOps for SDN/NFV services are highlighted. The benefit of such an SDK is illustrated by a secure content delivery network service (enhanced with deep packet inspection and elastic routing capabilities). With this use-case, the dynamics between developing and deploying a service are further illustrated

OpenEPC Integration within 5GTN as an NFV proof of concept

Abstract. Gone are the days, when a hardware is changed on every malfunctioning and the whole operation either stays down or load on the replacing hardware becomes too much which ultimately compromises the QoS. The IT industry is mature enough to tackle problems regarding scalability, space utilization, energy consumption, cost, agility and low availability. The expected throughput and network latency with 5G in the cellular Telecommunication Networks seems to be unachievable with the existing architecture and resources. Network Function Virtualization promises to merge IT and Telecommunications in such an efficient way that the expected results could be achieved no longer but sooner. The thesis work examines the compatibility and flexibility of a 3GPP virtual core network in a virtualization platform. The testbed is established on an LTE (Long Term Evolution) based network being already deployed and OpenEPC is added as virtual core network on it. The integration of OpenEPC in 5GTN (5TH Generation Test Network) is discussed in details in the thesis which will give an account of the possibility of implementing such a simulated vEPC (Virtual Evolved Packet Core) in a real network platform. The deployed setup is tested to check its feasibility and flexibility for a platform which could be used for NFV deployment in future. The monitoring of OpenEPC’s individual components while utilizing the major resources within them, forms the primary performance test. The CPU Load and Memory Utilization is tested on different CPU stress levels having a constant data traffic from actual UEs. At the completion of the thesis work, a consensus is built up based on the test results that the test setup can hold number of subscribers to a certain amount without any performance degradation. Moreover, the virtual core network throughput and network latency is also compared to the commercial LTE networks and theoretical maximum values on similar resources to check performance consistency OpenEPC must offer

Multi-access edge computing: A survey

Multi-access Edge Computing (MEC) is a key solution that enables operators to open their networks to new services and IT ecosystems to leverage edge-cloud benefits in their networks and systems. Located in close proximity from the end users and connected devices, MEC provides extremely low latency and high bandwidth while always enabling applications to leverage cloud capabilities as necessary. In this article, we illustrate the integration of MEC into a current mobile networks' architecture as well as the transition mechanisms to migrate into a standard 5G network architecture.We also discuss SDN, NFV, SFC and network slicing as MEC enablers. Then, we provide a state-of-the-art study on the different approaches that optimize the MEC resources and its QoS parameters. In this regard, we classify these approaches based on the optimized resources and QoS parameters (i.e., processing, storage, memory, bandwidth, energy and latency). Finally, we propose an architectural framework for a MEC-NFV environment based on the standard SDN architecture

An investigation into the readiness of open source software to build a Telco Cloud for virtualising network functions

Cloud computing offers new mechanisms that change the way networks can be created and managed. The increased demand for multimedia and Internet of Things (IoT) services using the Internet Protocol is also fueling the need to look more into a networking approach that is less reliant on physical hardware components and allows new networks and network components to be created on-demand. Network Function Virtualisation (NFV) is a networking paradigm that decouples network functions from the hardware on which they run on. This offers new approaches to telecommunication providers who are looking to new ways of improving Quality of Service (QoS) in cost effective ways. Cloud technologies have given way to more specialised cloud environments such as the telco cloud. The telco cloud is a cloud environment where telecommunication services are hosted utilising NFV techniques. As the use of telecommunication standards moves towards 5G, network services will be provided in a virtualised manner in order to keep up with the demand. Open source software is a driver for innovation as it is has a collaborative culture to support it. This research investigates the readiness of open source tools to build a telco cloud that supports functions such as autoscaling and fault tolerance. Currently available open source software was explored for the different aspects involved in building a cloud from the ground up. The ETSI NFV MANO framework is also discussed as it is a widely used guiding standard for implementing NFV. Guided by the ETSI NFV MANO framework, open source software was used in an experiment to build a resilient cloud environment in which a virtualised IP Multimedia Subsystem (vIMS) network was deployed. Through this experimentation, it is evident that open source tools are mature enough to build the cloud environment and its ETSI NFV MANO compliant orchestration. However, features such as autoscaling and fault tolerance are still fairly immature and experimental

Adaptive & learning-aware orchestration of content delivery services

Many media services undergo a varying workload, showing periodic usage patterns or unexpected traffic surges. As cloud and NFV services are increasingly softwarized, they enable a fully dynamic deployment and scaling behaviour. At the same time, there is an increasing need for fast and efficient mechanisms to allocate sufficient resources with the same elasticity, only when they are needed. This requires adequate performance models of the involved services, as well as awareness of those models in the involved orchestration machinery. In this paper we present how a scalable content delivery service can be deployed in a resource- and time-efficient manner, using adaptive machine learning models for performance profiling. We include orchestration mechanisms which are able to act upon the profiled knowledge in a dynamic manner. Using an offline profiled performance model of the service, we are able to optimize the online service orchestration, requiring fewer scaling iterations